Matronics Email Lists

I agree. Tim really needs that CFII! I've got dibs on the first 3 student slots (after Danielle, of course!)

On Sat, Jun 2, 2018 at 11:33 PM, Bob Turner <bobturner@alum.rpi.edu (--> RV10- ...

I also put the GPS antennas on the tailcone directly aft of the fiberglass cabin top for two reasons. First reason was that I wanted to make sure I had a good ground plane, and I didn't want to me ...

Just to confirm, Klaus is recommending replacing the spark plug wires at 500 hours, not the wires connecting the control box to the coils, right?

On Thu, Mar 16, 2017 at 10:55 AM, Albert <ibspud ...

Congrats Tim!!!

On Wed, Jan 11, 2017 at 1:01 PM, David Maib <dmaib@me.com (--> RV10-List message posted by: David Maib <dmaib@me.com (

Ice detection is one of the big reasons that the leading edges of my wings and stab are black (that and the design looked good!) I've picked up trace in hazy VMC, and the black paint made the ice ...

It was Bruce Stamper, from Dubois, WY (and summers in Alaska as a salmon fisher). He was on VAF quite a bit (as "Stamper"), but I don't recall seeing him on Matronics.

Sad deal... ...

Tim,

Next time try to schedule your AOG problems when I don't have my plane torn apart for annual!

Now just don't lose your key!

Ed

On Sun, Sep 4, 2016 at 5:14 PM, Tim Olson ...

Do not click. It's a phishing attack.

On Tue, Aug 23, 2016 at 5:19 PM, Stein Bruch <stein@steinair.com (

stein@steinair.com (

https://ssl.gstatic.com/docs/documents/share/ima ...

Do not click. It's a phishing attack.

On Tue, Aug 23, 2016 at 5:19 PM, Stein Bruch <stein@steinair.com (

stein@steinair.com (

https://ssl.gstatic.com/docs/documents/share/i ...

I just used the stock bolts, and then got 5/16(ID) and 1/4(OD) spacers from Mcmaster Carr.

On Wed, Aug 17, 2016 at 12:39 PM, Carl Froehlich <carl.froehlich@verizon.net ([email]carl.froehlich@ver ...

I did the same as Shannon, except with Crow. I think I just called Abby from Flightline and told her I wanted 4 of the RV10 Crow harnesses, with sewn in pads, with the blackbird option (all black with ...

Agreed with Jesse.

On Thu, Jun 16, 2016 at 10:03 PM, Kelly McMullen <kellym@aviating.com (--> RV10-List message posted by: Kelly McMullen <kellym@aviating.com ( --> RV10-List message ...

I have a pair of AntiSplat cowl flaps installed in my 10. I'm not sure that I would do it again if I were starting over. They were expensive (at $370 each), and both of the hinges ended up crackin ...

Count me in for one!

Thanks for coordinating this! I take it that you'll be driving an RV vs flying one this year?

On Tue, May 24, 2016 at 8:07 AM, bcondrey <condreyb@gmail.com (--> ...

The problem right now is Bill Shuster (R-PA), the chair of the Transportation and Infrastructure committee, is holding everything up because he's bull-headedly refusing to give up on ATC privat ...

Anyone who's done the inspection:

Were you able to fit the borescope inside of the gap fairing without removing the aileron or trimming the gar fairing corner (to inspect the aft side of the sp ...

I don't think that's the side that's hard to inspect. I believe it's the aft side of the spar, under the gar fairing, that requires the aileron to be removed and gap fairing to be trim ...

I was waiting for that question...

It's Heatshield Mat: Ed,

What is the insulating material on your firewall? Was that from Aircraft Spruce?

Kent

>> Ed Kra ...

That is correct. It's designed to connect to #5, and then pass thru the firewall on the starboard side of the firewall, I believe with the sensor inside the firewall.

I wanted the sensor on the ...

I did the same as Phil. Mounted the MP sensor on the firewall sensor block. I also used the extra hole in the sensor block to daisy chain the MP into my lightspeed boxes.

Attaching a few pics of th ...