Matronics Email Lists

The next question is how many types of wire do you want to buy? A roll of 18ga will serve most purposes,some as overkill. It is minimally stiffer to handle.
The weight increase for the plane is ...

To share some experience.
I have a Cherokee 6 . On a regular basis on V16 over Deer park, heading towards JFK ATC reports my transponder is not working.
It comes back shortly. The consensus was ...

A quick question: I have been in a bit of a stall in building my panel, but finally making headway again.

A year or 3 ago I bought a light strip from Being seen technology. This is a nice strip ...

yeah but:

if you lean far enough combustion becomes incomplete, so the gas is still burning as the exhaust vavle opens, resulting in a second, higher EGT. I learned of this when running the l ...

I realize this is more avionics then electrics, but this place is my primary resource.

After a small building hiatus, I am back on wiring my panel.

the 300 xl has MIC Audio hi and Low as po ...

I have the xmweather receover, geneeration 1

this small plastic , crimped on conncetor failed at the entrance to the plug. ( No stress relief I might add.) would anybody know a part number so ...

I do love the Mcmaster hardware store.

[url=http://www.mcmaster.com/#harsh-environment-wire-ties/=3xmqb5]http://www.mcmaster.com/#harsh-environment-wire-ties/=3xmqb5

JIm Timo ...

This is more avionics then electric but a question anyway.

Wiring a Garmin 300 xl to a collins ind 350-A indicator. The Garmin does not provide a resolver H output.

What is the function ...

This seems that it should have an easy answer, but In this area I am a neophyte.

In my 2 seat project, I have a Avcom AC6PA intercom. I was going to run the output of a Nav 122 into a switch on ...

OKay , a very timely post. Is there any data that the electric ones work. One only draw 1.5 amps per carb.

http://www.ulparts.com/SearchResult.aspx?CategoryID=94

Another is listed fr ...

re opening an old topic

Any insight on the electric form of carb heat for de ice purposes. I have a searey project, with the additional alternator so I have current to spare. I have seen o ...

I have a new 0.5 farad capacitor sitting around. It was left over from a step sons car audio adventure. I was thinking about using it for the capacitor in my Rotax powered project. Since it will lik ...

I believe this has been mentioned in the distant past. The concern was it just doesn't draw enough current
for an appreciable warm generation.

[url=http://www.ulparts.com/SearchResult.asp ...

I just put a 5 ohm resistor across a SPDT switch to give a high-off-low option.
Works great in the garage, but not flying yet.

Jim Timoney

--

In a message dated 8/9/2007 8:07:45 P.M. Eastern Standard Time, nuckollsr@cox.net writes:
http://aeroelectric.com/articles/In_Memory_of_Robert_L_Nuckolls_Jr.pdf

I am sorry for your loss. I a ...

Hello folks

Just exploring an option. Awhile before I started lurking here I bought an EXP bus. yes , yes I know, I wouldn't buy it today, but it seemed a good idea at the time.
so I am setting ...

Bob

Sorry for the delay. I attempted to learn the express software for this, and simply could not get it off my clipboard. so here is the free hand version. Sorry about the quality but I t ...

Working on the wig wag system using the B+C flasher.

What is going on inside that flasher?

I set it up on the bench with a DPDT switch. one side powers the flasher , the other the right an ...

I have the 40 amp rotax optional alternator. (It counts even if it's still in it's box on the shelf ,next to the plane right?) In any event the instructions include the option of just putting th ...

Okay here goes a hijack attempt.

I am concerned about the same problem in a rotax 912S. I found this source
[url=http://www.ulparts.com/SearchResult.aspx?CategoryID=94]http://www.ulparts. ...