Matronics Email Lists

Thank you Joe, that was helpful. Both diodes tested vood so ill keep on checking on why one of the 15a fuses to one of the HV power aupplies keeps blowing.

Mike

On Thu, Jul 12, 2018, 14:08 u ...

I'm working on a commercial microwave oven in one of my restaurants. One of the fuses blows when the start button is depressed. There are 2 magnetron tubes, one fan and 2 capacitors and 2 ...

Waxed lacing cord.

Hi All,

The March 2017 issue of Kit Planes has an article called "Maintenance Matters" and in that article there is a picture of some wires being secured with ...

This is the style that I like.
rdu.hari@gmail.com ([email]rdu.hari@gmail.com[/email])> wrote:[quote]Thanks Ralph. Do you have a part number for the eaton switches?

I found some LT series Il ...

I've recently purchased some eBay instruments (V/A) with both 500a and 50a shunts that are 75mv. On May 1, 2015 9:52 AM, "Robert L. Nuckolls, III" <nuckolls.bob@aeroelectric.com ([ema ...

You've been doing it so long, you've probably wore the tool out or at the very least, dulled it.

Mike

[b]

On Friday, March 02, 2012 1:09:00 PM, Robert L. Nuckolls, III wrote:
I was digging around in the goodies box looking
for a missing crimp tool and found this puppy . . .

Emacs!

I don't thin ...

I use the wax cord as well. There is something nostalgic and relaxing
about lacing up a section of wiring. I use tie wraps, loosely
positioned to hold them in position until the loom is ready.
...

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} <! ...

For wire that small a butt splice would not be apprpriate. Instead, soldering the wires together covered by heat shrink might be a better alternative.

Mike

[b]

Just about anywhere in New Mexico, Arizona or Nevada. I don't know
about New Mexico and AZ but at least Nevada has $0 state income tax like
we have here in TX..

Mike
[quote] Ok, I'll stir up ...

I built mine about a 10 years ago (I'm still not flying) but you can see
the process and results. There are others out there who have done a
better job and there are some things I will probably c ...

I'm right there with you guys, first kit delivery (non pre-punched) in
1996. Working on the roll-bar....well, "working" is a loose term. Life
got in the way.

Mike

You got me by ...

Marty, it's been a bizillion years since I installed my Gretz Pitot
tube so I can't offer much other than a few pictures. Here is the
technique I used and maybe it will help you out.
http://b ...

Let me forward my "Welcome Back" as well. I bought my kit in April of
'97 and am working on the tip-up roll bar now. Progress is very slow
and I got for months at a time without even t ...