Matronics Email Lists

I have the parts manuals converted digitally and translated to English. But if you have the maintenance manuals converted digitally I would like a copy.
And if anyone need a copy of the parts manual ...

I sure it is not a power problem. I would open the unit clean and re-lube the bearings. Or send it out to get it done.

pm me at QAS44n@yahoo.com.
Thanks

A friend of mine had the same problem on his CJ after he installed a US wheel and tire mod. His first thought was the new mod was the problem and looked at everything that the mod would cause the shim ...

I use aircraft striper from a car paint shop $32/gal. I put it on thick let it set then took a pressure washer and start the furthest away from you and work the gun toward you. In other words do not ...

Paul
Look in your manual Figure 11-12

This is a quote from AOPA emails I get
"In order to transition from the current non-expiring aircraft registration to one with a three-year expiration date printed on the certificate, the FAA is ...

OK...where do I get one?

There not my calculations they are quoted from the site. As I understood their idea, was if a seamless tube of 5052 could be made to the size of an aircraft fuselage it could hold that pressure. What ...

Here is a site that has some good information on 5052 tubing
http://www.mechanicsupport.com/tube_strength.html

"A 1/4 inch (0.025) aluminum tubing can hold 3,500 psi of pressure. The same al ...

Why don’t you just convert to #4 AN tubing. (6mm=.236”) and (.25”=6.35mm). So #4 tubing is a little larger (.014”), and the flare is the same angle (real close). You will need to use the AN co ...

Octane is just an Anti-Knock number, but also plays a role with high altitude. But to add some food for thought 87 Octane has 125000 Btu’s/Gal compared to 100LL’s 120200 Btu’s/Gal. So a gallon ...

I have come across an "Air Pathways AP120" Intercom. Does anyone use intercom? And can anyone help me with a copy of the installation manual & schematic?
Thanks

I have come across an "Air Pathways AP120" Intercom. Does anyone use one of these? And can anyone help me with a copy of the installation manual & schematic?
Thanks

The Shuttle needs a lot of things to align for a launch so it may arrive at a point in space at the right time, altitude, and orbit. The earths rotation, and declination have to be taken into account ...

I have come across an "Air Pathways AP120" Intercom. Does anyone use one of these? And can anyone help me with a copy of the installation manual & schematic?

I would like to know where you got that nice looking seal on the outer ring, mine...well I'm embarrassed to call it a seal.

I have not got into my landing gear yet and reading my Manual and looking at the Parts manual, this how I interrupt the PT-6 Manual. On page 2-4 Fig 5 (for the Nose Gear Brace) Detail “B” it gives ...

The 90Deg replacement I mentioned previously is not a the common of the shelf BNC 90deg adapter. It is a replacement for the TED 9-30-10. I have them in my Terra radio trays. I see that ICOM has a str ...

I found a 90deg replacement it's a little expensive at $25 ea. Nice thing there is no soldering required. I also found a few sites that have it in stock. The first site's shipping cost Well...you bes ...