Matronics Email Lists

I'm looking for the throttle bell crank assembly for
the 2 stroke with the 3 cable system
Someone unfortunate to have a damaged Kit fox mod 1-11-111
fuselage give me a PM please

If you use a small amount of red/orange high temp RTV
on both sides of the gasket it won't leak the excess oil.
With the exhaust off, rub the engine side across sand paper
on a flat surface to see ...

Have you tried to switch the leads on the back of the gauge
to see if the low reading goes to the other on needle?

This should be a vent between the outer ceramic seal and
the enter seal. If it is leaking from there then the ceramic
outer seal is leaking.
This space is also provided to vent heat from between th ...

I took the left front mount to a welding shop
and had the upper hole welded up and drilled
a new offset hole. All is good

Great post and trip
Wish you had posted before, we would have flown over from
Soldotna to meet you. Less than an hour.
Bob

I think this is it

http://www.bowersflybaby.com/tech/Maule_Tailwheel.pdf

I am working on an Avid Catalina and am
looking for a set of wing tip sponsons/floats.
Anyone know of Catalina parts or a wreck
please post or email. I've seen a couple wrecks
for sale but got no ...

OK I found this posted 02-sept-07 by oscardog
Tognar.com
click on Travel bags & Packs
Click on Skuff Saver Tape
#TYC 7210
14" wide sold by ft
I called them, it ...

Pat, I also bought some of that material and have looked thru
my receipts from hell and cant find the company.
However I have a lot left and could ship you some.
Let me know how much you need. Seem ...

Univair Aircraft Corp
www.univair.com
Piper Fuel Float Ball
P/N U10853-000

I have a Kit fox Mod 1 and wish it had two holes to choose from.
I think it depends on where your weight and balance came in.
If it is forward, like mine, I would chose the lower one for more
nose ...

Hi Lowell
I didn't mean to imply you were giving bad advice, just that
leaving off the safety cables is bad advice.
To leave them off it to subject the machine to more damage
than with them.
I on ...

Thats bad advice
The cables are to keep the prop and "WING" from hitting
the ground. Even with broken bungees and bent gear
you can still fly home on the safety cable.
What should be eli ...

Thanks for the reply, thats where I but all my prop stuff.
The Brolga blades are out of production so I was hoping
someone out there had a new or used prop or just the blades
their not using they w ...

I'm wanting to find an ultraprop with Brolga blades
I'm running one on my kitfox mod 1 and works great with
582 3X1. the brolga is 68" X3 blade
I want the same thing when I finish the mod 3. ...

I'm the buddy Leni is talking about.
I made the weld lugs,drilled and tapped and bolted to the disks.
Used a 3/4 bolt as an axel installed in the hub, hub bolted in the
wheel ( now the other three ...

tireco.com site says Nanking products available in north America
It also shows 21-12-8 slick tires as available
Bob

Bob
Looks like John and Debra might have to chime in.
Sorry for the delay.
I looked thru all my stuff, Mod 1, 2 and 3 books. I found
instructions for building the wings with the different tanks ...

Bob
When I bought my mod 1 fox, stripped for rebuild, it had two 6 gal tks.
I put a 13 gal fiberglass tk in the left wing. I did remove one diagonal and one rib. The tk is glued to the spars with co ...