Matronics Email Lists

Lynn, I was also warned against the use of scat hose; My initial setup that dit not include airbox (had only 90°elbow from truck radiator hose and conical air filter on it) worked fine. Then I deci ...

Lynn,I also noticed that if I remove the SCAT tube which connects the carb to the air filter, there is some petrol sitting there (if the engine has just been running); I also experience some troubles ...

[ However, I can tell you they are fed directly from the main oil gallery through the case to the bearings. Hope this helps.
Andy
Suncoast Sportplanes Inc.[/quote]

thank you Andy,
if I understan ...

hi folks does anyone happen to have a drawing representing the oil
system of the hyd tappets version of Jabiru 2200? How the main oil gallery splits into tappets and head supply? I have seen one
so ...

thanks John.
Taildragger configuration makes it certainly worse, but my remarks concern the airplane that is as level as an airplane can be ( +5° or -5° from horizontal keeps fwd or rear cylinders ...

hi guys, I would like to share some very worrying facts about my engine (2200 w/hyd lifters) and maybe get some answers from those who have already been there.
I have just completed reassembling my ...

thanks Andy and all
martin

hi guys I am reassembling my engine (2200, s/n 2262, hyd lifters) after the replacement of valve guides.
the manual says : head bolts INITIALLY assembled at 24ft, check at 25hrs at 20ft - but if ...

hi folks,
I would like to find out what are typical compression values on a
recent 2200; could those who measured their compressions give me their
results, together with approx engine hours and age ...