Matronics Email Lists

Hi All

Thanks for all the info on the windows. I am trying as far as possible to reproduce the windows to the original Mk4 size so if anyone does have the dimensions handy then that would be u ...

Hi All

I'm involved in the recovering of a Mk 4. Does anyone have the dimensions of the glazed triangular windows in the sides just behind the doors.

Any help would be appreciated.

...

Hi All

Just about to recover a fuselage of a Mk 4. Does anyone have a materials list handy. I need to know the amount of covering material tapes etc. Also an indication of paint and glue would ...

Hi All

Just a quick warning regarding the tank level tubes used on some kits.

My Kitfox 7 supplied in 2003 used a tank sight tube design which incorporated hard butyrate tube that you h ...

Hi All

It seems that there are no commercial suppliers of upholstery in the UK.

My request for contacts has resulted in the suggestion of Matthew Leach but he has been out of contact fo ...

Hi All

I've Just got to the position where I seriously have to make a decision regarding upholstery for my XS trigear.

I'm looking to use fabric rather than leather but apart from that t ...

Peter

I got these two documents regarding wire capacity off the web.

Regards

David Steade

Graeme

Have a look at this web site.

[url=http://www.thinkauto.com/]http://www.thinkauto.com/

Regards

David Steade
[quote][b]

Hi All

A bit more guidance please . Now I'm fitting the exhaust to my Tri-gear. Its the latest oval design. The heat shield on mine is very close to the nut on the sump banjo fitting.

I ...

Hi All

I have just fitted the oil cooler into the duct on my tri-gear XS. To improve the cooling I have lowered the cooler by two inches as suggested in past posts.

The clearance between ...

John

I used Aerodur white topcoat and Barrier Primer supplied by "Pexa, Springwood Business Park, Burrwood Way, Holywell Green, West Yorkshire, HX4 9BJ tel 01422 314400

Regards ...

Remi

A friend had this problem for a long time on a Ban-Bi. It was ultimately solved by fitting a new sprag clutch. I assume you have the heavy duty starter motor fitted with a good ...

Fred

I used .080" (2mm) seemed about right . After I cut all the holes there is not much left and the panels have to support a lot of weight after they are populated.

Regards
...

Hi All

Now that Jerry has stopped supporting the Arplast Prop in the UK does anyone have a good contact at the Factory who can be contacted in English for the supply of spares and service?
...

Thanks for the replies

Supplier now located.

Regards

David Steade

[quote][b]

Hi

I'm trying to get a supplier in the UK for the plastic quick connect couplings for the pitot static lines in the wing root.
Any help would be appreciated.

Regards

David Steade ...

Hi

Just a bit more information. The land line number for Matt Leach starting 01872*** now belongs to someone else and they would appreciate no further calls.

Regards

David Steade
...

Bob

I had exactly the same situation. Luckily the structural work was finished with Ampreg 20 but for some of the finishing I used Ampreg 21.

I found the same issues as yourself. The onl ...

Hi

Thanks for all the reply's regarding contact details for Matthew. I seems the person I am after is Matt Leach but having tried the contact numbers it seems he is out of circulation.

I ...

Hi

I'm looking for some contact details. Several years ago I had some upholstery from Matthew who used to live in the south of England and did the upholstery for the program "A plane is ...