Matronics Email Lists

I have an internally regulated Denso alternator on a Carbon Cub. I'd
like some sort of OV protection and was looking at installing a
Crowbar and OV relay. My question is do I need the relay? If I ...

Anyone have an easy/elegant solution. I'd like to put a cooling fan
on my glare shield that exhausts the avionics when the temperature
gets over about 120. I figured some use of a thermistor, but ...

I have a couple of ray allen trim servos with the LED position
indicators. I'd like to hook the dimmer circuit (white wire) to my
panel light switch so when I turn the lights on the indicators dim. ...

If you want a Carling switch, I used Carling L52E166A77. It is a 24V light. If you need 12V just go to there website to configure it. The important part is the L52E. I am using it as a OFF-Low Boo ...

Not to beat a dead horse, but KCI (parts for Lancair) has true right
angle connectors from amp for about $5

http://www.aerocraftparts.com/ItemForm.aspx?item=31-335-RFX&ReturnUrl=Categories.asp ...

I work on lightsports and we had the Icom 200 now going to the 210. I
talked with them about the "switch". Basically it is a pilot isolate
switch. My understanding, and I would confirm ...

This may be obvious to most, but I found a flaw in my wiring schema
that I figured I'd share. This is somewhat specific, but I am sure
many are in a similar situation. I have a Lancair Legacy with ...

I am working on a Lancair Legacy (ie carbon frame) and basically the Z-14 system 24v with two batteries. The main will have a larger battery and 60A alt, the aux with a smaller B&C battery and ...

I am trying to connect an RS232 gps output to many devices (4-5) and wanted an easy foolproof method. I've considered just butt splicing them together ( hard if I want to add another later), butt ...

Gilles
You are absolutely right and my mistake. Gigavac does make a more efficient model the GX11TA 24v 45mA hold down current. You just have to ask for it!

Thanks for catching my error.

...

Another solution is Gigavac. Their GX11 is basically the same as the Tyco ev200, but less expensive.

http://www.gigavac.com/products/relays/gigavac/index.htm

I had a very good experience orderi ...