Matronics Email Lists

Hi Martin,

This is great information, thank you for taking the time to post it. It sounds like there are a number of "small" issues with the installation--what would you say is your o ...

Hi list,

I'd like to do some work *way* up under the panel and was thinking it would be easier to accomplish if the rudder pedals were removed. Has anybody pulled them from a completed ai ...

If you need a copy, I've found the local locksmith can make them.

On Thu, Oct 21, 2021 at 1:47 PM Doc <docclv@windstream.net (--> RV10-List message posted by: Doc <docclv@windstream. ...

Hi Leo,

Thanks for sharing your experience. How did you mount your coils? In place of the mags or somewhere else?

David

On Tue, Sep 7, 2021 at 10:40 AM Leo Kno <leok4880@gmail. ...

Hello RV-10 fliers,

Has anyone installed the SDS CPI electronic ignition system? If so, PIREPs are requested!

Thanks,
David

I have a SD8 alternator (14V) on the shelf and a 28V single alternator system in the hangar.

Under the guise of education and recreation, I wonder if I could disassemble the SD8 and rewind it with ...

Anybody have a slick cup holder setup for the front seat?
I'm currently rocking the stock tunnel with no console.

David

Tim,

Some stepper motor rotors will lose a fair amount of their magnetism when removed from their stator. This causes the torque of the motor to be significantly reduced. I don't know if th ...

Received!

On Sun, Nov 29, 2020 at 9:22 AM Carlos Trigo <trigo@mail.telepac.pt ([email]trigo@mail.telepac.pt[/email])> wrote:

[quote]--> RV10-List message posted by: Carlos Trigo <tri ...

Hi list,

What are you using for the G3X yaw damper gain setting?
So far around 1.0 seems good, but I'm curious what other folks have settled on.

David

Thanks for the help, lots of great experience on this list!
David

On Tue, Oct 13, 2020 at 6:15 PM Dan Beacom <thebeacoms@gmail.com (--> RV10-List message posted by: Dan Beacom <thebea ...

Hi list,

Has anyone attempted to install a Garmin yaw servo using the Van's RV-14 yaw servo mounting kit? Trying to decide whether to go that route or spring for the $550 Garmin kit. I' ...

Hi list,

Does anyone have experience with the Motopod cargo pod? If so, what is your take?

Also, I'd be very interested to hear if anyone has retrofitted one onto a flying airplane and h ...

Geoff and Dan,

Thanks for your replies. The GoCycle is very cool (albeit a bit pricey) and it sounds like a 16" Dahon might fit the bill. I'll post back if I find out any more informat ...

Hi all,

I'm curious to hear if anyone has found a folding bike that will fit through the baggage door. Would be especially neat if two would fit!

David

~$2400 for $1M smooth. ~200hrs in type, ASEL, IFR.

On Thu, Mar 12, 2020 at 5:13 PM Rob Kermanj <flysrv10@gmail.com (--> RV10-List message posted by: Rob Kermanj <flysrv10@gmail.com (

Check out section 4 of the build manual. It lists them as .063 2024-T3 ALCLAD.

David

On Tue, Oct 15, 2019 at 10:29 AM Carlos Trigo <trigo@mail.telepac.pt (--> RV10-List message poste ...

Hey list,

I've been experimenting with a variety of different coolers to find a good setup for the -10 baggage area. I recently tested out the Igloo Profile 30 Roller and it's a great fit ...

Hi list,

It seems that the user moosix is a spammer. How can we remove them from our list?

Here are moosix's posts---not much RV-10 content...

Hello! Please advise a lawyer in Ukraine ...

Lenny,

This is very interesting. How did you determine that the discs were warped or was it obvious? Hopefully you've found the issue now!

David

On Mon, Apr 29, 2019 at 10:10 AM L ...