Matronics Email Lists

The antenna is flush with the inside surface, and the TNC is a 90 degree fitting. there is no clearance issue. The antenna and filler consume the void tightly, and a ground plate covers the inside s ...

I buried my GTN antenna in the cabin top above the access plate in the overhead console. Works flawlessly, no cutting of the outside skin necessary.
Cheers,
Frank

I made an audible, and will be flying to OSH with a friend from AZ Friday. Is anyone headed East with an open seat Sunday or Monday? I am going to NJ, but anywhere from ATL to Boston could work.
Th ...

Hi Ed,

What tint did you end up ordering? Are you happy with them? I am considering them for my next/current build. Anyone else with feedback on the C B window set?

Thanks
Frank

Prefer QB, but open to top quality standard build. Prefer close to North East, but will travel west for the right project/deal. Looking for a winter project. Please let me know what you have. email f ...

For Back UP EFIS:

On an IFR platform I always utilize a separate manufacture for the secondary EFIS.

The GRT Mini x is a great package in a small footprint.

From the Lake Placid NY crash...

Preamble: It has been just over 2 years since this crash. On several occasions I have started to do a write-up on the incident. Each time I have tried I get tangl ...

I like all of your choices as they represent the best in class systems available today. If you fly real IFR, I like back up hardware from a different manufacturer.

I am using a GRT Mini-x for th ...

I am ordering paint for the RV-10. Does anyone that used PPG Deltron 2000 know the paint quantity required for the base color and clear coat?

Also the quantity of Epoxy Primer needed?

Many Th ...

I ordered the covers from RvBits several months ago. They did take several weeks, but arrives without issue. It is a long shipping window... be slightly patient.

Cheers,
Frank

New or like new condition for Slick 6393 Left Mag.

Thanks
Frank
frankdombroski at gmail

Myron, the Matco valve has o-rings that have a history of leaking. Look up at the valve on the firewall and I suspect you will find the origin of the leak. If so, you will need to pull the valve and ...

To clarify my post... I am located in NJ, and prefer a Northeast project, with a strong preference for a complete set of kits.

Many Thanks,
Frank

From: Frank Dombroski <f.dombroski@yahoo.co ...

[quote]Looking for an RV-10 QB kit. Prefer NE location, but any considered. High quality non QB also considered. Any state of completion, so long as work quality is high.

Please email info ...

Hi Tom, I received the insert pack, I will send them along with the kit. Many thanks...

Frank

I have the kit, will get it installed and on the way to Canada this week...

Many Thanks
Frank

I am in the Bay area for a couple days, business trip. Does anyone need an excuse to go out and burn some 100LL Wednesday afternoon/evening? I'll buy fuel or food.

Cheers,
Frank
email frankdomb ...

The doors are sealed. I have the 4 fuse vents, plus 4 overhead vents. I have plenty of airflow in the summer. At altitude, and during the winter the cold air from the tail cone is flowing aggressiv ...

I am getting a significant draft in the back seat from the channels on the bulkhead at the aft end of the baggage compartment. What has been used to seal the gaps created by the corrugated grooves?
...

My Valve was purchased from Vans at about the same time. It was leaking from the shaft seal, especially when under pressure (parking brake set). I had to remove it and send it back for replacement. ...