Matronics Email Lists

Just an update. I rechecked all the grounds; antenna, radio, etc., made a larger ground plane (as big as I could fit under the antenna with radius just shy of the length of antenna), and tried a diffe ...

Thanks for the input everyone. My plane seems to be the only one this is happening to as I've flown the same route in everything from Cubs to Challenger 300's and no interference. I'll try what you al ...

We have several towers in the vicinity of our airport. It can be occasionally annoying depending on the direction you're going to or coming from.

Thanks Kelli,

I have a 406mhz elt with the antenna mounted inside the fuselage and comm antenna mounted on top of the fuselage. The elt antenna is approximately 18" below and 12" forward ...

When flying in the vicinity of radio or TV towers, I get a constant buzz or static over the radio. Sometimes I can hear the conversation or music from the station, but just barely. It seems to start w ...

When flying in the vicinity of radio or TV towers, I get a constant buzz or static over the radio. Sometimes I can hear the conversation or music from the station, but just barely. It seems to start w ...

The homebuilt ADS-B in projects have been great. You can build them even cheaper if you want. Here's the link to the original project. http://stratux.me/

I've built a couple and they work really gr ...

Seems to be coming through from the headsets. It's not near as bad when I disconnect the co pilots headset. I wonder if an external ground to the intercom box would help.

I'll have to check all that out when I get back from this trip. Thanks for the input everyone. I'll let you know what happens.

I have not. I'll try it. I'll disconnect the intercom and hook up the headset straight out of the radio.

Yes. It runs through a Sigtronics SPO-22N intercom.

Looking for some advice. I have a Kitfox IV using an Icom A5 transceiver mounted on the panel. It has the ni-cad batter installed as well as connected to the ships power. It is connected to a Comant C ...

I currently have an early model 2200A Serial #438 with the cast-in induction manifold and want to change it to the later model 2 piece billet style manifold.

Has anyone else made the change?

Wha ...

Has anyone thought about USCG approved fuel line?

http://marineengineparts.com/shopsite_sc/store/html/page487.html

Has anyone seen or know anything about this EFI system? Looks interesting.

http://www.silent-hektik.com/UL_Jab22_1.htm

Has anyone seen or know anything about this EFI system? Looks interesting.

http://www.silent-hektik.com/UL_Jab22_1.htm

I'm looking for an 8 inch diameter spinner that will fit a GT 2 blade wood prop on a Jabiru 2200. Any suggestions would be greatly appreciated.