Matronics Email Lists

Ok heres how this came to be. I purchased three overhead consoles from Tony, the first one costing $1895 and that included lights, vents and DVD player and the fit was bad. I called Tony and reported ...

For those of you looking for the overhead console, its finally ready and fitting perfect to look at it go to nonstopaviation.com or I believe you can also contact Stein from SteinAir because he is put ...

Albert,
Did that change the cylinder head temps at all?

Thats great, I talked to Gus out there at Van's a while back about the length of the throttle cable in the quadrant package because I was using the longer mixture cable for throttle and ordering a new ...

I have built a couple 10's and the throttle cable has been short every time, I always have to order the 50.5 also, please call Van's and brief them about the problem because I already have and the mor ...

With the FPS system you have to supply a power wire to it, so if there is a problem just pull the breaker its also a good idea to put the trim breaker right next to it because thats more likely to fai ...

Let me ask this question, If I buy the kit, engine, panel and everything else that goes into finishing an aircraft with my money and name on everything and when its all done I put it up for sale, how ...

The kit that Scott just bought from me, after it was complete was serial #855 and the new kit that "I" just paid for and received last week is #913. Steve Raddatz

Dean,
Check this site
http://www.justrvparts.com/RV-10%20air%20controller.htm
My partner and I designed this and I've been testing this for the last 4 months on one of my RV-10's We develop ...

You could take the spring off the Gov. if you have that kind, but just remember that if your push pull cable breaks that the prop might be stuck in the last position. I have taken the spring off of al ...

I believe all the 10's I built where around 2550-2600 out of the box, I just mark the arm and shaft and move the arm one spline.

Gary I'm 5'9" and I move the seat 3/4 of the way forward so unless your all leg I think the best place is to put the peddles as close to you as possible. There will still be plenty of room in the ...

I forgot when everything dries you can glass in the relief you cut between the front and back cabin and you can finish the edge how you want, we use a single layer of 2 inch glass tape and Z glass the ...

Michael,
I have installed two AA overheads that where after the fact deals, Cut off the front of it where it dips and also cut off the entire back lip which is to long anyway and when your all done w ...

Monty you could mount a video camera under the wing and a tv screen in the panel and still not affect useful load.
Monty, I'm going to put a full Slick ignition system on my extra 260 which has a 315 ...

Peter that is beautiful, I also stand the tail during rollout. Thanks for the info I'm also landing at my airpark which is narrow for a blind landing, but its progressing nicely.

I have got over 600 hours in RV's with 500 plus hours in taildraggers. My plane is a Extra 260 with the mid wing design. so when I'm on final I lose site of the runway at any speed under 80kts due to ...

Just bought an Extra, Most fun I ever had flying but it takes a little getting use to the landings.
Steve Raddatz

I run 40psi with no problems

Here's the biggest profit part to date.
The first one I ordered from Accuracy Avionics was $1800 with DVD, vents, clothes hook in baggage area also cabin lights and baggage dome light all wired. Over ...