Matronics Email Lists

I just peeked at the wiring diagrams.

eFIs Expansion cable Pin 13 is labels as Volts2, but I don't see a volts1 anywhere. There are two power inputs into the main connector. It is possible that on ...

One thing to avoid is any coiling in the wires near the magnetometer. The 8 Dave refers to failed the EMI test miserably the first time with the wing tip lights on. We pulled the wing tip and found a ...

In the last couple of years we have seen three failures of the Cleveland calipers on RV-10s. Two of them were on the same plane and with in a couple days of each other. Sure, there's probably some re ...

You have to buy the complete set. It makes a big difference over the Cleveland setup. I recommend it.

Sent from my iPhone

On Jul 3, 2014, at 6:52 AM, Kelly McMullen <apilot2@gmail.com ( ...

Hi Matt,

How's this working out for you in the long-run? Any issues?

Thanks,

Tim

Yes, Garmin's new servos have auto-trim built in. Easy, clean install.

Tim

Sent from my iPhone

[quote] On Mar 18, 2014, at 5:36 PM, "Seano" <sean@braunandco.com> wrote:
...

Any thoughts on using transistors in this setup instead of relays?

Thanks,

Tim

let's try this. HEre's a link:

http://www.aircraftersllc.com/docs/Garmin%20Suggestion.png

Tim

As I understand it, yes it changes the polarity in the sense that if it gets positive on pin 11 and negative on 12 then it will output positive on 13 an negative on 14 and vice versa.

I don't know ...

So here is our current conundrum:

We are installing a new G3X panel in a Glasair II RG. It has the Garmin autopilot. The Garmin autopilot has auto trim included. Garmin drives the trim motors di ...

I haven't done the aircraft extra's flap system, but we've always found room for the TCW safety trim box behind the panel. I second installing it there. When the plane is fully assembled you will have ...

We were able to do it here, with a bit of patience, some smaller hands and . . . offset wrenches?? I don't remember exactly, but no need to cut your tanks open!

I'll have to ask the guy wh ...

Van's Aircraft is bringing the RV-14 to the Watsonville Airshow this Labor Day Weekend, Aug. 31- Sept. 1. They will have the aircraft on display Saturday all day and Sunday mor ...

Van's Aircraft is bringing the RV-14 to the Watsonville Airshow this Labor Day Weekend, Aug. 31- Sept. 1. They will have the aircraft on display Saturday all day and Sunday mor ...

Van's Aircraft is bringing the RV-14 to the Watsonville Airshow this Labor Day Weekend, Aug. 31- Sept. 1. They will have the aircraft on display Saturday all day and Sunday mor ...

If it is on top if the wings, it's not in the plans, but a little larger gap there can be a good thing, because tight tolerances can lead to scratching the paint if you aren't careful when you remove ...

I give a 3rd vote for the cube just before spider. Keep it away from pumps when possible. They, sometimes, seem to be affected by the pulsations of the pumps.

Sent from my iPhone

On Jul 27 ...

I don't know how much the D-rings weigh, but I bet these are much lighter. They are made from extruded aluminum hinge. Plus they have a little lip so they are easy flip up with your finger.

Tim
...

Third item down . . . [url=http://www.aircraftersllc.com/products.html]http://www.aircraftersllc.com/products.html

Tim
On 7/22/2013 5:45 PM, Rob Kermanj wrote:

[q ...

Since Performance Engines has been brought up in this thread . . . Many have had great experiences with them, but the Lancair community has had some pretty serious safety issues come up. I personall ...