|
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
Arty Trost
Joined: 25 May 2006 Posts: 205 Location: Sandy, Oregon
|
Posted: Sat Mar 24, 2007 4:49 pm Post subject: Planning a flight Oregon to Texas and on to MV |
|
|
Hi Kolbers
Larry Cottrell (Kolb flyer) and I (Drifter flyer) are
planning to fly from Oregon to Texas this May. We've
gotten lots of good advice, and here is the route that
we're planning as of now. Larry's wife Karen will be
ground crewing us - we'll probably meet her once a day
for gas and at our final stop every night. Since both
Larry and I are flying E-LSAs, we're no longer limited
to 5 gallons, and he'll be carrying 20 and I'll have
16 (maybe 20 - I haven't decided if I want that much
extra weight.)
At the end of this message is our proposed route to
Texas with airstrips along the way. If we don't get
into terrible headwinds, we are figuring on 125-150
mile legs. We're hoping to average 60 mph and stop
every 2+ hours just to stretch our legs...but I've put
in back-up strips just in case we need to land sooner.
(And of course, there's always fields, dirt/gravel
roads, etc.)
While I've poured over sectionals and topo maps, I'd
still like to hear from any of you who have actual
knowledge of the route - any advice or warnings you
want to give us? I know there's a lot of you on this
list who live along the route and who have flown it.
Thanks in advance for any info. And...if any of you
want to join us in the air for a while or just hang
out in the evening, let us know.
Arty Trost
Maxair Drifter
Sandy, Oregon
• From Rome, Oregon take Hwy. 95 south to Winnemucca,
NV.
132 miles
• Go east on I-80 to Battle Mountain, NV. 60 miles
• Go south on Hwy. 305 to Austen, NV 91 miles
• Take Hwy. 50 east, then Hwy. 377 south to Tonopah,
NV 120 miles
• Link up with Hwy. 95 south again, to Beatty, NV
110 miles
• Continue south on Hwy. 95 through the Pahrump Valley
(Calvada Meadows Airpart, 64 miles;) to Boulder City,
NV (85 miles;) Needles, CA (82 miles;) Blythe, CA (93
miles.)
• Take I-10 east to San Antonio, TX - with the
following airports as possible stops: Buckeye, AZ;
Casa Grade, AZ; Marana NW Regional, AZ; Benson
Municipal, AZ ; Wilcox: Cochise Co, AZ; Lordsburg, NM;
Deming, NM; Las Cruces, NM; El Paso: Horizon, TX;
Culberson County/Van Horn, TX; Ft. Stockton, TX; Ozona
Muncipal, TX; Sonora Municipal, TX; Junction, Kimble
County, TX; Kerrville Municipal, TX;
Kestral/Springbranch, TX; Burnet, TX
Coming back we'll be heading to El Paso and then up to
Monument Valley for the Kolb fly-in in mid-May. Will
Uribe has sent us helpful suggestions for the route
from El Paso to MV - and hinted that he may join us if
he's able to fly his bird. And Dennis Kirby - I
believe you're planning to fly up this year, but
you'll be starting from AZ and will probably be taking
a different route.
www.LessonsFromTheEdge.com
"Life's a daring adventure or nothing"
Helen Keller
"I refuse to tip toe through life just to arrive safely at death."
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
Back to top |
|
|
mdnanwelch7(at)hotmail.co Guest
|
Posted: Sat Mar 24, 2007 5:48 pm Post subject: Planning a flight Oregon to Texas and on to MV |
|
|
Arty,
One of the things I would highly recommend is making sure you are
thoroughly familiar with your GPS. I would assume you have a GPS. Get the
latest update, find the quick instruction pamphlet
and practice a bunch.
As I told you the last time you asked for advice, I just flew from near
Sacramento, south to Tahachapi, then west past Las Vegas, on to SW
Utah....my new home. I had the luxury of being able to spend a full week,
day and night, preparing.
I studied charts (sectionals), the weather, renewed my pilot license, new
medical, and without a doubt, one of best advantages was practicing night
after night with my Garmin 296.
Give me a call. I guarantee I can give you a couple of "tricks" to make
your navigating a heckuva lot more easy. Mike Welch
435-817-1816
_________________________________________________________________
Exercise your brain! Try Flexicon.
http://games.msn.com/en/flexicon/default.htm?icid=flexicon_hmemailtaglinemarch07
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
Back to top |
|
|
Dennis.Kirby(at)kirtland. Guest
|
Posted: Mon Apr 02, 2007 12:10 pm Post subject: Planning a flight Oregon to Texas and on to MV |
|
|
Arty said:
<< ... El Paso and then up to Monument Valley for the Kolb fly-in in
mid-May. Dennis Kirby - I believe you're planning to fly up this year,
but you'll be starting from AZ and will probably be taking a different
route. >>
Arty, Larry, Will U, and MV Kolbers -
I will be flying my Mark-3 to MV from the Albuquerque area.
My plan is to depart Thursday morning (17 May).
Monument Valley is approx 300 air miles from Albuquerque.
It would be great to join up with you guys as you fly up from El Paso.
John Hauck plans to RON at my airport (Sandia East, 1N1) Wednesday
night. Maybe he could join the gaggle as well, Thursday morning. Plus,
a friend of mine is also planning to fly his Challenger up to MV to join
our event.
Easiest route for airplanes with 150-mile ranges (like mine) will be
west from Albuquerque (following I-40), refuel at Grants or Gallup, then
northwest via Window Rock to Chinle, AZ. Here, I plan to land and
transfer 5 gal of fuel from my ferry tank to the main tanks. (There are
no services at Chinle.) From Chinle, it is 85 miles to Gouldings. This
route generally follows roads the whole way.
It would be fun to fly the last 300 miles to Monument Valley as a flight
of six little airplanes!
Looking forward to seeing you all again ...
Dennis Kirby
Cedar Crest, NM
| - The Matronics Kolb-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|