geospring(at)comcast.net
Guest
|
 Posted: Tue Apr 03, 2007 3:02 pm Post subject: RV4-List Digest: 7 Msgs - 04/02/07 |
 |
|
Steve, I just checked mine and I have a half inch lip all around that makes full contact with the bulkhead all the way around and is hinged on the bottom for access. The weight of the seatback cushion holds it in place. I,ve rolled it many times and it has never moved. If I had a digital camera I could take a photo of it for you. It,s on my list.
George RV-4 4375J Chester, Ct. 3B9
[quote]-------------- Original message --------------
From: RV4-List Digest Server <rv4-list(at)matronics.com>
| Quote: | *
==================================================
Online Versions of Today's List Digest Archive
==================================================
Today's complete RV4-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the RV4-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=html&C hapter 0
7-04-02&Archive=RV4
Text Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 07
-04-02&Archive=RV4
================================================
EMail Version of Today's List Digest Archive
================================================
----------------------------------------------------------
RV4-List Digest Archive
---
Total Messages Posted Mon 04/02/07: 7
----------------------------------------------------------
Today's Message Index:
----------------------
1. 01:05 AM - Rear seat back (S Sampson)
2. 04:55 AM - Re: Rear seat back (Derrick Aubuchon)
3. 05:26 AM - Re: Rear seat back (Rob Ray)
4. 10:29 AM - Re: Rear seat back (S Sampson)
5. 11:16 AM - Re: Re ar sea t back (halbenjamin(at)optonline.net)
6. 11:29 AM - Re: Rear seat back (DFCPAC(at)aol.com)
7. 02:02 PM - Re: Rear seat back (Derrick Aubuchon)
________________________________ Message 1
_____________________________________
Time: 01:05:47 AM PST US
From: "S Sampson"
Subject: Rear seat back
I am putting the rear seat frame together, and puzzling how the weight
of the pax leaning back in it is to be taken by the bulkhead. Is the
intent that the point contact of the side channels to the bulkhead is
the mechanism? It appears a bit crude!
Thanks, Steve.
________________________________ Message 2
_____________________________________
Time: 04:55:04 AM PST US
Subject: Re: Rear seat back
From: "Derrick Au buchon "
Check Van's website.
There is a Service Bulletin (SB 97-05-1), which addresses this very issue.
The SB entails installing angles, (or gussets), between the rear
seat/baggage bulkhead, and the longerons.
> I am putting the rear seat frame together, and puzzling how the weight
> of the pax leaning back in it is to be taken by the bulkhead. Is the
> intent that the point contact of the side channels to the bulkhead is
> the mechanism? It appears a bit crude!
>
> Thanks, Steve.
--
Derrick Aubuchon
daubuchon(at)volcano.net
RV 4 N184DA, 500+ hrs
Based (at) O70 (Jackson, CA)
________________________________ Message 3
_____________________________________
Time: 05:26:53 AM PST US
From: Rob Ray
Subject: Re: Rear seat back
Steve,
If you restrict your back seat usage to petite, cute girls, you will never have
a problem... 
RR
Check Van's website.
There is a Service Bulletin (SB 97-05-1), which addresses this very issue.
The SB entails installing angles, (or gussets), between the rear
seat/baggage bulkhead, and the longerons.
> I am putting the rear seat frame together, and puzzling how the weight
> of the pax leaning back in it is to be taken by the bulkhead. Is the
> intent that the point contact of the side channels to the bulkhead is
> the mechanism? It appears a bit crude!
>
> Thanks, Steve.
--
Derrick Aubuchon
daubuchon(at)volcano.net
RV 4 N184DA, 500+ hrs
Based (at) O70 (Jac kson, CA)
---------------------------------
TV dinner still cooling?
Check out "Tonight's Picks" on Yahoo! TV.
________________________________ Message 4
_____________________________________
Time: 10:29:29 AM PST US
From: "S Sampson"
Subject: Re: Rear seat back
Derek - Thanks. Yes, I have read the SB but think that relates to the steel
bracket supporting the bulkhead itself. I have those installed.What I am
puzzling about is the fact that on the front side of the bulkhead the
contact is with the sharp edge of the seat frame. I have put a couple of
pictures
http://gikonfuse.blogspot.com/2007/04/rear-seat-installation.html#links
on my blog to try and make my concern clearer. Am I misunderstanding
something?
Cheers, Steve
> < BR>> Smokey, A portfolio of cute girls are largly out for me, (I would probably
|
[quote] find half my spar bolts missing) but I trust a cute wife at 112lbs is OK?
Still would like to build the thing right though!
---
| | - The Matronics RV4-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV4-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
