Matronics Email Lists :: View topic - VMS capacitance fuel probes used with Dynon EMS?

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

VMS capacitance fuel probes used with Dynon EMS?

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

jgarner(at)dslextreme.com
Guest

Posted: Wed Apr 04, 2007 8:26 pm Post subject: VMS capacitance fuel probes used with Dynon EMS?

You can get the Princeton converter from Grand Rapids.  Also I think

Blue Mt. makes one if you want to deal with them...



Several articles on the Internet for roll your own converters if you search.



Im putting in a GRT EIS in place of an EPI800 which uses those same probes.



HTH, Joe

Scott Derrick wrote:

 	  Quote: 	
		   

 

 Hi,

 

 I have Vision Microsystems capacitance fuel probes installed in my

 Velocity.  I would like to use them with Dynon's EMS which requires a

 0-5 volt output from the fuel probes. I don't know if the Vision probes

 output frequency, capacitance or voltage.  Dynon didn't seem to know

 either.

 Vision is going through extreme changes since bought by JPI,  tech

 support is nil, I've been waiting for a new Vision VM1000C since last

 august and have given up waiting.

 

 Any help in using these VMS fuel probes with the Dynon unit would be

 greatly appreciated.  The probes worked fine for 450 hours with a VM1000

 unit,

 

 I have heard that Princeton Electronics made capacitance fuel probe

 converters but teh only number I have for them( 616-281-5193) is

 disconnected.

 

 thanks,

 

 Scott

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

jonlaury

Joined: 06 Nov 2006
Posts: 336

Posted: Sat Apr 07, 2007 11:37 am Post subject: VMS capacitance fuel probes used with Dynon EMS?

The Princeton converters for Electronics  International probes were $200 each. Skysports makes capacitance probes up to 8'  with 5VDC output that will work with the Advanced Flight Systems 3400/3500  EFIS/Engine combo that I plan to use. Skysports probes are $110.

  

 John

   [quote][b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum