Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

MV/John H

Matronics Email Lists Forum Index -> Kolb-List

View previous topic :: View next topic

Author Message

Craig.Nelson(at)heraeus.c
Guest

Posted: Wed Apr 11, 2007 5:22 pm Post subject: MV/John H

Thanks John Point taken. Just got excited about meeting Pat at MV. Hay I wanted different exhaust for my 912 also. The first time I saw the STE I wanted it but I don’t think it will fit under the cowling.  When modifying the Titan, the welder that did the job did not weld stainless for crap! That’s when the back of the muffler went through the prop. My new muffler is welded with a certified welder and I made a rubber isolated mount to the back of the exhaust to eliminate any part leaving the aircraft, with exception of the springs.  

Uncle craig  

Don’t archive  

    

_______________________________________________________________________________________________________ 

The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination, or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you receive this in error, please contact the sender and delete the material from any computer.   [quote][b]

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

John Hauck

Joined: 09 Jan 2006
Posts: 4639
Location: Titus, Alabama (hauck's holler)

Posted: Wed Apr 11, 2007 5:46 pm Post subject: MV/John H

Hi Craig:



Thanks for writing.  No sweat on the List thing.



I bet the STE will fit, or come mighty close to it.



Rick Thomason designed it to fit inside the Pulsar cowling, which is 

pretty small.



You can get some dimensions off mine at MV.



Getting excited now and ready to head West.  Should be flying by 

Saturday or Sunday.  The little stuff is nickle and dime'ing me to 

death.  Thought I would have the lexan installed today, but never got 

started on it.  Spent the whole day installing enricher cables, a few 

instruments, tidying up stuff, a lot of ty-wraps, etc.  Don't know 

where the time goes.



Will try to get the lexan done tomorrow and the main gear back on Fri. 

Should be able to test run the new engine and then haul the fuselage 

back over to the airstrip.  Get the wings and center section 

installed, preflight, and go fly.



Take care,



john h

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
John Hauck
MKIII/912ULS
hauck's holler
Titus, Alabama

John Hauck

Joined: 09 Jan 2006
Posts: 4639
Location: Titus, Alabama (hauck's holler)

Posted: Wed Apr 11, 2007 6:14 pm Post subject: MV/John H

| I bet the STE will fit, or come mighty close to it.

 



Hi Gang:



My appologies.



My reply to Craig was intended to go bc.



Thought Craig had sent me a bc msg.  Surprise, surprise.



john h

mkIII



DO NOT ARCHIVE

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
John Hauck
MKIII/912ULS
hauck's holler
Titus, Alabama

Display posts from previous:

	Matronics Email Lists Forum Index -> Kolb-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum