Matronics Email Lists :: View topic - How about a sliding canopy?

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

How about a sliding canopy?

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

cbaron66

Joined: 17 May 2007
Posts: 16

Posted: Fri Jul 06, 2007 11:24 am Post subject: How about a sliding canopy?

Has anyone tried to do a sliding canopy on a 601XL yet? I think it would be a neat idea.

Gig Giacona

Joined: 10 Jan 2006
Posts: 1416
Location: El Dorado Arkansas USA

Posted: Fri Jul 06, 2007 12:32 pm Post subject: Re: How about a sliding canopy?

It has been done. There is at least one picture of a sliding canopy 601 on the Zenith site. 

 	  cbaron66 wrote: 	
		  Has anyone tried to do a sliding canopy on a 601XL yet? I think it would be a neat idea.

_________________
W.R. "Gig" Giacona
601XL Under Construction
See my progress at www.peoamerica.net/N601WR

planecrazydld(at)yahoo.co
Guest

Posted: Fri Jul 06, 2007 1:02 pm Post subject: How about a sliding canopy?

Need a vacation? [url=http://us.rd.yahoo.com/evt=48256/*http://travel.yahoo.com/;_ylc=X3oDMTFhN2hucjlpBF9TAzk3NDA3NTg5BHBvcwM1BHNlYwNncm91cHMEc2xrA2VtYWlsLW5jbQ--]Get great deals  to amazing places [/url]on Yahoo! Travel.  [quote][b]

daveaustin2(at)primus.ca
Guest

Posted: Fri Jul 06, 2007 1:57 pm Post subject: How about a sliding canopy?

As owner of a sliding canopy, I say "beware".

They are difficult to keep sliding easily.  Any distortion of the airframe, 

say in an incident, and they don't slide at all.  Even a small situation 

causing dust/sand to get in the tracks jams them.

Spitfire pilots always opened the canopy before landing.  I wish I had.

Dave Austin  601HDS - 912, Spitfire Mk VIII

BobTezyk

Joined: 10 Jan 2006
Posts: 38
Location: Midlothian, TX

Posted: Sat Jul 07, 2007 7:18 am Post subject: Re: How about a sliding canopy?

I was considering purchasing one that was for sale in Vancouver, WA.  The airplane was very well built.  While I liked the idea of a fixed windscreen, the canopy itself was a little fragile.  The latching mechanism  was hard to latch and not foolproof.  The biggest reason I walked away was that the additional support structure added a lot of weight.  There was a lot more metal required to make it all work.



Pictures attached.



Regards,

Bob Tezyk

601XL QB/ J3300 

Midlothian, TX

Image(018).jpg

Description:

Filesize:

66.21 KB

Viewed:

713 Time(s)

Image(017).jpg

Description:

Filesize:

53.04 KB

Viewed:

726 Time(s)

Image(002).jpg

Description:

Filesize:

61.01 KB

Viewed:

704 Time(s)

Image(001).jpg

Description:

Filesize:

77.73 KB

Viewed:

721 Time(s)

mrcc1234(at)sbcglobal.net
Guest

Posted: Sat Jul 07, 2007 1:16 pm Post subject: How about a sliding canopy?

This is the first built version of what I am thinking about that I have seen

yet.  A three point support is the only way to go here I think.  I believe

it would also prevent the jamming that was mentioned before.

Does anyone have any plans for this sort of design?

I was thinking about a recessed rear attachment point, but I had not figured

out how to keep water out of the fuselage yet.  The external one would be

very easy to build and I could work up a design that keeps it flush with the

plane rather than raised as shown.

All ideas are wanted and appreciated.

Thanks, Matt

XLVair



--

planecrazydld(at)yahoo.co
Guest

Posted: Sat Jul 07, 2007 1:41 pm Post subject: How about a sliding canopy?

do not archive



...just do not forget that the upper fuselage aft of the cockpit is substantially wider than the forward end of the canopy/instrument panel...



Matt Stecher <mrcc1234(at)sbcglobal.net> wrote:[quote] --> Zenith-List message posted by: "Matt Stecher" 



This is the first built version of what I am thinking about that I have seen

yet.  A three point support is the only way to go here I think.  I believe

it would also prevent the jamming that was mentioned before.

Does anyone have any plans for this sort of design?

I was thinking about a recessed rear attachment point, but I had not figured

out how to keep water out of the fuselage yet.  The external one would be

very easy to build and I could work up a design that keeps it flush with the

plane rather than raised as  shown.

All ideas are wanted and appreciated.

Thanks, Matt

XLVair



--

purplemoon99(at)bellsouth
Guest

Posted: Sat Jul 07, 2007 3:10 pm Post subject: How about a sliding canopy?

I don't see anything wrong with more "hoop's" going from the left side to 

the rt. side and abrace tieing them in end to end. I can't stand the shakie, 

shake, every time  you open or close                   Joe N101HD 601 XL

---

mrcc1234(at)sbcglobal.net
Guest

Posted: Tue Jul 10, 2007 3:32 pm Post subject: How about a sliding canopy?

It  would seem fairly simple to design a sliding canopy that would raise up a few  inches at the front and then slide to the rear.

  

 From  my own design work I know that the devil is always in the details and I have not  thought this completely through, but I think I will give this allot of  thought.

  

 I have  awhile before I get to that stage, so I have some time and will keep my eyes  open for other sliding designs.

  

 Take  care,

 Matt

 XLVair

 [quote]   --

gregnk8(at)yahoo.com
Guest

Posted: Thu Jul 12, 2007 9:01 am Post subject: How about a sliding canopy?

I asked the question of venturay and got a picture of one of their test plane with it on they say is flying.  can;t find the attachmnet now so maybe contact them. 



   TV dinner still cooling?

[url=http://us.rd.yahoo.com/evt=49979/*http://tv.yahoo.com/]Check out "Tonight's Picks"[/url] on Yahoo! TV. [quote][b]

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum