Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Mod 73

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

davidjoyce(at)doctors.org
Guest

Posted: Sun Jul 15, 2007 2:24 pm Post subject: Mod 73

Just to add to what David Corbett has said about the practicalities: I

brought my tail planes back to my workshop and used a piece of plumbing

waste pipe, and a vacuum cleaner extension pipe which both needed building

up to a tight fit using PVC tape on one side and duct tape covered with

smooth parcel tape on the other side, both covered liberally with grease,

but without cling film or any extra release agent. The mod part 1 took about

90 mins and seemed straightforward with the hole dimensions OK and both TP6s

solidly bonded. The pipes came out with the sort of twisting force you can

readily apply by hand.

           For those who don't want to wait for self adhesive labels, I

experimented with putting a single layer of bid over the required placard,

simply photocopied onto ordinary paper. It has set solidly in legible state

without any blurring of the lettering Regards, David Joyce, G-XSDJ

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

ksiggery(at)mac.com
Guest

Posted: Mon Jul 16, 2007 9:34 am Post subject: Mod 73

As we are not the builders of G-ROOV and lacking sufficient expertise  

(we feel) to make a good job of Mod 73 is there anyone out there  

willing to do the work for us? We are Biggin based but could tow/fly  

to accomodate.



Thanks Kevin Siggery

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

ami(at)mcfadyean.freeserv
Guest

Posted: Mon Jul 16, 2007 12:01 pm Post subject: Mod 73

<<photocopied onto ordinary paper. It has set solidly in legible state

 	  Quote: 	
		   without any blurring of the lettering >>


	


I suspect that the Inspector's signature (when applied) will get 'bleached' 

by the wet epoxy, unless signed with a laundry pen!



Duncan McF.



---

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

jron.jones(at)tiscali.co.
Guest

Posted: Wed Jul 18, 2007 12:43 pm Post subject: Mod 73

Greetings All,

  

 I have just completed mod 73 on my own aircraft  (G-RJWX) and all went well - thankfully! 

 As I did the job at home and the aircraft was left  at the airfield (Sleap) I needed a substitute for the torque tube. So I borrowed  the tailplane posts off someone's trailer (mine have been galvanised and are now  too thick!).

 They needed a couple of coats of paint and flatting  to get a really good, smooth finish but they were ideal.

  

 Hope that helps.

  

 Regards,

 Ron Jones.

  

  [quote][b]

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum