 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
ElleryWeld(at)aol.com
Guest
|
 Posted: Sat Jul 21, 2007 2:37 am Post subject: Kolb list Prop Balancer |
 |
|
This is the Prop Balancer I built and it works like this the brass piece has a tapered end inside it to center it on the balancing base Pin insert the brass slug into your Prop and then set it on the balancing pin on the base, sitting on your bench use a 6 inch precision scale to measure from the bench to a known point on the Prop blade tip, then rotate your next blade to that same point that you measured from on the first blade etc., for each blade
I sand the end of the blade to get a good balance I hope this helps anyone with Vibration Problems
if you dont have a Lathe to make your own I am willing to help anyone on the list at cost of materials
Ellery in Maine N447EB Original Firestar
**************************************
Get a sneak peek of the all-new AOL at http://discover.aol.com/memed/aolcom30tour
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
| Description: |
|
| Filesize: |
12.06 KB |
| Viewed: |
295 Time(s) |
|
| Description: |
|
| Filesize: |
11.75 KB |
| Viewed: |
260 Time(s) |
|
|
|
| Back to top |
|
 |
jb92563
Joined: 23 Mar 2007
Posts: 314
Location: Southern California
|
| Posted: Fri Jul 27, 2007 7:00 am Post subject: Re: Kolb list Prop Balancer |
|
|
How did you create the taper inside the brass part?
Just curious.....I also have a Lathe but am just a Novice.
I like your method....reminds me of an RC model balancer.
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________
Ray
Kolb UltraStar (Cuyuna UL-202)
Moni MotorGlider
Schreder HP-11 Glider
Grob 109 Motorglider
Do Not Archive |
|
| Back to top |
|
|
ElleryWeld(at)aol.com
Guest
|
| Posted: Fri Jul 27, 2007 7:12 am Post subject: Kolb list Prop Balancer |
|
|
I used a 45 degree de burring tool to finish the inside taper to a sharp point in side
Ellery Original Firestar N447EB
do not archive
**************************************
Get a sneak peek of the all-new AOL at http://discover.aol.com/memed/aolcom30tour [quote][b]
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
