schu(at)schu.net Guest
|
Posted: Mon Jul 30, 2007 6:12 pm Post subject: Help with adding an Icom A200 to my existing RT-328 |
|
|
Bill McMullen wrote:
Quote: |
Why not just use a 3PDT (three pole) switch and put the headphones on there as well. If the ICOM is your primary radio, you'll note that it also has Aux In inputs. By wiring the other radio to one of these (optionally with a switch), you can monitor both radios at once.
|
Thanks for the reply Bill, yes I could use a 3 pole switch, but there
may be causes where I want to monitor two channels at once. Do you (or
anyone) know if tying the two headset outputs together will cause the
radios to backfeed each other?
Also, does anyone know if I got my interlock correct? I see that the
RT-328 radio has "Ant Interlock" and "Mike Key" so I'm assuming those
are like the "Interlock" and "PTT" the icom radio uses.
Other than that the wiring seems pretty straight forward, just want to
make sure I get it right.
I wonder if there are any good books on the subject.
Thanks,
schu
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|