Matronics Email Lists :: View topic - Op Tech panel at Oshkosh

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Op Tech panel at Oshkosh

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

georgesoverit(at)yahoo.co
Guest

Posted: Mon Oct 01, 2007 12:48 pm Post subject: Op Tech panel at Oshkosh

Hello Everybody,



There was a beautiful Op Tech panel at Osh at the Accuracy Avionics stand.

Can anybody tell me who owned that beauty, or where I might be able to see

some photos?



Thank you,

George Soverit (cabin doors) 



9:46 PM

ricksked(at)embarqmail.co
Guest

Posted: Mon Oct 01, 2007 1:25 pm Post subject: Op Tech panel at Oshkosh

Here is one from Deem's library

http://deemsrv10.com/album/OSHKOSH%202007/Misc/slides/DSC_0048.html

---

georgesoverit(at)yahoo.co
Guest

Posted: Mon Oct 01, 2007 2:04 pm Post subject: Op Tech panel at Oshkosh

Thanks Rick



--

AV8ORJWC

Joined: 13 Jul 2006
Posts: 1149
Location: Aurora, Oregon "Home of VANS"

Posted: Mon Oct 01, 2007 5:59 pm Post subject: Op Tech panel at Oshkosh

George, I agree with your assessment of a beautiful panel.



My database shows the panel was built for Dwayne Herring of Midland,

Texas, kit #40506.  Hopefully he is a lurker on this list and will

respond direct to you on the decisions which guided his selection.



John Cox



--

georgesoverit(at)yahoo.co
Guest

Posted: Tue Oct 02, 2007 12:09 am Post subject: Op Tech panel at Oshkosh

Thanks John



--

dherring10

Joined: 29 Apr 2007
Posts: 11

Posted: Tue Oct 02, 2007 9:07 am Post subject: Re: Op Tech panel at Oshkosh

George, 

 I just saw your post about my panel Tony had in his booth at Oshkosh. John is correct that I am a lurker. Maybe when I actually have a flying airplane I will feel that I can give advice about building to others. Besides there have always been such good answers posted by the time I read the questions that in most instances I could not add anything. Tim Olsen has told me to respond anyway so maybe I'll start now.  Here are a couple more pictures of my panel. Some of the items and switches Tony and Eric had installed on the panel are not the ones that will actually be used. They were just trying to fill the holes for the show. Let me know if you have any specific questions that I can answer and feel free to contact me offline if you want. I was looking at both the Chelton and OP Tech systems and had decided on the Chelton until the D2 problems. After Tony and I talked about and I did my own research I decided to use the OP Tech. Hoping for good things with the buy-out of OP Tech by Aerosonics.  Besides if Deems was using them I knew he had done the homework.



 I will tell you that Tony, Eric and all the gang at Accuracy Avionics have been great to work with. I think they will ship the panel to me sometime this month. I wish I was really ready for it.



dwayne(at)mid-westglass.com



Dwayne Herring

40506

QB Fuse

Panel-2.JPG

Description:

Filesize:

149.93 KB

Viewed:

521 Time(s)

Panel-1.JPG

Description:

Filesize:

144.25 KB

Viewed:

530 Time(s)

georgesoverit(at)yahoo.co
Guest

Posted: Tue Oct 02, 2007 10:21 am Post subject: Op Tech panel at Oshkosh

Thank you Dwayne, I think anybody who comes up with a panel as beautiful as

yours has a lot to share with this group.



At the moment we are struggling with how to finish the interior off in our

10 so it looks sweet but doesn't add too much weight. I was quite taken by

the look and feel of your panel and wondered if a similar approach could be

taken with the rest of the interior and wondered what you planned to do.



I believe you have used the Nextel Suede Coating product on your panel and

wondered if you plan to use it anywhere else inside the cabin? 



If you have done the thinking, perhaps you could share with us all what you

plan to do with the rest of your cabin inside? Any photos of any progress

would be gratefully appreciated.



Thank you,

George



--

AV8ORJWC

Joined: 13 Jul 2006
Posts: 1149
Location: Aurora, Oregon "Home of VANS"

Posted: Tue Oct 02, 2007 3:28 pm Post subject: Op Tech panel at Oshkosh

Dwayne, great to have you surface like this.  Your selections with the

help of the gang at Accuracy adds another rung at climbing the ladder of

RV-10s setting a new kit building standard.



I too, think Deems has done his homework and look forward to his Phase

I, fly off.



Your panel is one of the top 10 in my book.



John

40600



--

speckter(at)comcast.net
Guest

Posted: Tue Oct 02, 2007 3:55 pm Post subject: Op Tech panel at Oshkosh

I too have an OP tech panel (integrated system) My math says that there are

3 of us, but I hear rumors of more folks that have chosen OP. If any of you

are lurking, speak up and we can compare notes.



Gary

40274



--

Deems Davis

Joined: 09 Jan 2006
Posts: 925

Posted: Tue Oct 02, 2007 5:41 pm Post subject: Op Tech panel at Oshkosh

Pat Thysen also has an Op Tech panel.



Deems Davis # 406

'Its all done....Its just not put together'

http://deemsrv10.com/



gary wrote:

[quote] 



 I too have an OP tech panel (integrated system) My math says that there are

 3 of us, but I hear rumors of more folks that have chosen OP. If any of you

 are lurking, speak up and we can compare notes.



 Gary

 40274



 --

Deems Davis

Joined: 09 Jan 2006
Posts: 925

Posted: Tue Oct 02, 2007 5:43 pm Post subject: Op Tech panel at Oshkosh

Patrick O'Neil has also ordered his OP Tech systems.

Deems Davis # 406

'Its all done....Its just not put together'

http://deemsrv10.com/

gary wrote:

[quote] 



 I too have an OP tech panel (integrated system) My math says that there are

 3 of us, but I hear rumors of more folks that have chosen OP. If any of you

 are lurking, speak up and we can compare notes.



 Gary

 40274



 --

poneill(at)irealms.com
Guest

Posted: Wed Oct 03, 2007 12:37 am Post subject: Op Tech panel at Oshkosh

Yup, I ordered back in July, and am now eagerly awaiting the resuming of

production by OP.  Darn acquisition doldrums!



Do any of you other OP guys happen to know if you can change the screen

orientation (portrait vs. landscape) in the field or if it needs to be set

at the factory?  



All these great OP panels and the waiting are causing me reconsider things

again and again.



Best Regards,

Patrick #40715



--

speckter(at)comcast.net
Guest

Posted: Wed Oct 03, 2007 4:59 am Post subject: Op Tech panel at Oshkosh

Do you have contact info on these gents?

Gary



--

speckter(at)comcast.net
Guest

Posted: Wed Oct 03, 2007 5:08 am Post subject: Op Tech panel at Oshkosh

I don't think that you can change the orientation.  I sure would think that

a software change could change it though, but you would end up with the hard

keys and the knobs on the side of the box not the bottom.



Gary

40274



--

poneill(at)irealms.com
Guest

Posted: Wed Oct 03, 2007 5:20 am Post subject: Op Tech panel at Oshkosh

That's true, I had forgotten about the buttons and knobs. Scratch that idea.



Best Regards,

Patrick #40715



--

dherring10

Joined: 29 Apr 2007
Posts: 11

Posted: Thu Oct 04, 2007 8:54 am Post subject: Re: Op Tech panel at Oshkosh

Patrick,



I have tried to send an answer to the question you sent to me offline but I keep getting the email returned to me.



Call me if you want  432-416-0635



Dwayne Herring

40506

QB fuse



do not archive

lljjss22(at)yahoo.com
Guest

Posted: Wed Oct 17, 2007 11:34 am Post subject: Op Tech panel at Oshkosh

I've also opted for OP technologies.  I've been

working with Accuracy Avionics for about 8 months now.

 The panel should be ready for me to pick up in the

next few weeks.  If anyone is interested in a copy of

the drawings for the panel shoot me a note off line to

LJS2(at)pge.com.



Jearl Strickland #214



--- Deems Davis <deemsdavis(at)cox.net> wrote:



[quote] 

 <deemsdavis(at)cox.net>

 

 Patrick O'Neil has also ordered his OP Tech systems.

 

 

 Deems Davis # 406

 'Its all done....Its just not put together'

 http://deemsrv10.com/

 gary wrote:

 > 

 <speckter(at)comcast.net>

 >

 > I too have an OP tech panel (integrated system) My

 math says that there are

 > 3 of us, but I hear rumors of more folks that have

 chosen OP. If any of you

 > are lurking, speak up and we can compare notes.

 >

 > Gary

 > 40274

 >

 > --

Deems Davis

Joined: 09 Jan 2006
Posts: 925

Posted: Wed Oct 17, 2007 1:14 pm Post subject: Op Tech panel at Oshkosh

Don't be bashful Luther, post it here so we can all drool!



Deems Davis # 406

'Its all done....Its just not put together'

http://deemsrv10.com/



Mr Luther Strickland wrote:

[quote] 



 I've also opted for OP technologies.  I've been

 working with Accuracy Avionics for about 8 months now.

  The panel should be ready for me to pick up in the

 next few weeks.  If anyone is interested in a copy of

 the drawings for the panel shoot me a note off line to

 LJS2(at)pge.com.



 Jearl Strickland #214



 --- Deems Davis <deemsdavis(at)cox.net> wrote:



   

> 

> <deemsdavis(at)cox.net>

>

> Patrick O'Neil has also ordered his OP Tech systems.

> Deems Davis # 406

> 'Its all done....Its just not put together'

> http://deemsrv10.com/

> gary wrote:

>     

>> 

>>       

> <speckter(at)comcast.net>

>     

>> I too have an OP tech panel (integrated system) My

>>       

> math says that there are

>     

>> 3 of us, but I hear rumors of more folks that have

>>       

> chosen OP. If any of you

>     

>> are lurking, speak up and we can compare notes.

>>

>> Gary

>> 40274

>>

>> --

lljjss22(at)yahoo.com
Guest

Posted: Thu Oct 18, 2007 8:09 am Post subject: Op Tech panel at Oshkosh

All...



Per Deems request!!



..L. Jearl Strickland #214



--- Deems Davis <deemsdavis(at)cox.net> wrote:



 	  Quote: 	
		   

 <deemsdavis(at)cox.net>

 

 Don't be bashful Luther, post it here so we can all

 drool!

 

 Deems Davis # 406

 'Its all done....Its just not put together'

 http://deemsrv10.com/

 

 Mr Luther Strickland wrote:

 > 

 Strickland <lljjss22(at)yahoo.com>

 >

 > I've also opted for OP technologies.  I've been

 > working with Accuracy Avionics for about 8 months

 now.

 >  The panel should be ready for me to pick up in

 the

 > next few weeks.  If anyone is interested in a copy

 of

 > the drawings for the panel shoot me a note off

 line to

 > LJS2(at)pge.com.

 >

 > Jearl Strickland #214

 >

 > --- Deems Davis <deemsdavis(at)cox.net> wrote:

 >

 >   

 >> 

 >> <deemsdavis(at)cox.net>

 >>

 >> Patrick O'Neil has also ordered his OP Tech

 systems.

 >>

 >>


	


__________________________________________________

panel_final_2.pdf

Description:

Download

Filename:

panel_final_2.pdf

Filesize:

673.37 KB

Downloaded:

577 Time(s)

Deems Davis

Joined: 09 Jan 2006
Posts: 925

Posted: Thu Oct 18, 2007 1:18 pm Post subject: Op Tech panel at Oshkosh

Swwweeeeeeeet!



Deems Davis # 406

'Its all done....Its just not put together'

http://deemsrv10.com/



do not arhive



Mr Luther Strickland wrote:

 	  Quote: 	
		   All...



 Per Deems request!!



 ...L. Jearl Strickland #214



 --- Deems Davis <deemsdavis(at)cox.net> wrote:



   

> 

> <deemsdavis(at)cox.net>

>

> Don't be bashful Luther, post it here so we can all

> drool!

>

> Deems Davis # 406

> 'Its all done....Its just not put together'

> http://deemsrv10.com/

>

> Mr Luther Strickland wrote:

>     

>> 

>>       

> Strickland <lljjss22(at)yahoo.com>

>     

>> I've also opted for OP technologies.  I've been

>> working with Accuracy Avionics for about 8 months

>>       

> now.

>     

>>  The panel should be ready for me to pick up in

>>       

> the

>     

>> next few weeks.  If anyone is interested in a copy

>>       

> of

>     

>> the drawings for the panel shoot me a note off

>>       

> line to

>     

>> LJS2(at)pge.com.

>>

>> Jearl Strickland #214

>>

>> --- Deems Davis <deemsdavis(at)cox.net> wrote:

>>

>>   

>>       

>>> 

>>> <deemsdavis(at)cox.net>

>>>

>>> Patrick O'Neil has also ordered his OP Tech

>>>         

> systems.

>     

>>>         



 __________________________________________________

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum