Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Trailering a Kolb

Matronics Email Lists Forum Index -> Kolb-List

View previous topic :: View next topic

Author Message

kolbmark3

Joined: 10 Jan 2006
Posts: 40
Location: Mt Clemens, MI

Posted: Tue Oct 23, 2007 4:19 am Post subject: Trailering a Kolb

Rick,

  

 You said "The  Kolb Mk III came home in a closed truck with wings  attached."

  

 What size truck did you use, how did you get the  Kolb in and out of the truck, and how much did it cost?

  

 I may need to move my Mark III from NC to MI next  month.

  

 Jim Mark III

    [quote][b]

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
Jim
Mark III
Mt. Clemens, MI

WhiskeyVictor36(at)aol.co
Guest

Posted: Wed Oct 24, 2007 6:38 pm Post subject: Trailering A Kolb

In a message dated 10/22/2007 1:32:40 P.M. Eastern Daylight Time,  jindoguy(at)gmail.com writes:

  	  Quote: 	
		  So, my    recommendation is get a closed trailer. Fold the wings in as the Kolb was    designed. Suspend the boom in a very well padded cradle to take the load off    the tail wheel. 	


 

 Guys,

  

 When transporting with wings folded, I assume you are keeping them mounted  to the universal joint at the main spar.  

  

 What about the outer end of the wing?  Do you still utilize the small  cross tube that goes through the boom tube, with safety clips, to support  the wing?  Seems that the weight of the wing, while traveling over  bumps, would bend that tube.   

 Bill  Varnes

Original Kolb FireStar

Audubon NJ

Do Not  Archive





See w [quote][b]

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

jindoguy(at)gmail.com
Guest

Posted: Wed Oct 24, 2007 8:04 pm Post subject: Trailering A Kolb

That's what I used. The fellow from whom I bought the Mk III showed me how to make pins from a clothes hanger that had an extension handle so that I didn't have to stretch to reach in to put them in. I've never seen any bending of the tube, at least none that caused them to bind, or made the cross tube loose in the boom. 



Rick



On 10/24/07, WhiskeyVictor36(at)aol.com (WhiskeyVictor36(at)aol.com) <WhiskeyVictor36(at)aol.com  (WhiskeyVictor36(at)aol.com)> wrote:[quote]      In a message dated 10/22/2007 1:32:40 P.M. Eastern Daylight Time,  jindoguy(at)gmail.com (jindoguy(at)gmail.com) writes:

  	  Quote: 	
		  So, my    recommendation is get a closed trailer. Fold the wings in as the Kolb was    designed. Suspend the boom in a very well padded cradle to take the load off    the tail wheel. 	


 

 Guys,

  

 When transporting with wings folded, I assume you are keeping them mounted  to the universal joint at the main spar.  

  

 What about the outer end of the wing?  Do you still utilize the small  cross tube that goes through the boom tube, with safety clips, to support  the wing?  Seems that the weight of the wing, while traveling over  bumps, would bend that tube.   

 Bill  Varnes

Original Kolb FireStar

Audubon NJ

Do Not  Archive





  See w [quote][b]   http://www.matronics.com/Navigator?Kolb-List http://forums.matronics.com  [quote][b]

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

apilot(at)webtv.net
Guest

Posted: Wed Oct 24, 2007 8:55 pm Post subject: Trailering A Kolb

I thought that the little tube through the fuselage that hold the wings would bend also.  I have trailered it 4 times now and it has not bent.  One of these days I will build a support because it does not look very strong.    Vic in Sacramento

 From: WhiskeyVictor36(at)aol.com

 Sent: Wednesday, October 24, 2007 7:37 PM

 To: kolb-list(at)matronics.com

 Subject: Re: Trailering A Kolb

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">      In a message dated 10/22/2007 1:32:40 P.M. Eastern Daylight Time,  jindoguy(at)gmail.com writes:

  	  Quote: 	
		  So, my    recommendation is get a closed trailer. Fold the wings in as the Kolb was    designed. Suspend the boom in a very well padded cradle to take the load off    the tail wheel. 	

 Guys,

 When transporting with wings folded, I assume you are keeping them mounted  to the universal joint at the main spar.  

 What about the outer end of the wing?  Do you still utilize the small  cross tube that goes through the boom tube, with safety clips, to support  the wing?  Seems that the weight of the wing, while traveling over  bumps, would bend that tube.   

 Bill  Varnes

Original Kolb FireStar

Audubon NJ

Do Not  Archive

See w [quote]

://www.matronics.com/Navigator?Kolb-List

cs.com

[b]

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

Tom O'Hara

Joined: 26 Jan 2006
Posts: 34

Posted: Thu Oct 25, 2007 4:12 am Post subject: Re: Trailering a Kolb

I brought my MkII home to PA from Northern Wisconsin in a 28' rented U-Haul.  And a detour down to Dayton so I ended up with about 1300 miles on it.  When I unloaded I hade absoulety NO hanger or trailer rash.  Attached are some pictures of how we rigged it.

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

P5220084.JPG

Description:

Filesize:

816.66 KB

Viewed:

607 Time(s)

P5220086.JPG

Description:

Filesize:

662.56 KB

Viewed:

547 Time(s)

P5220085.JPG

Description:

Filesize:

845.63 KB

Viewed:

599 Time(s)

Tom O'Hara

Joined: 26 Jan 2006
Posts: 34

Posted: Thu Oct 25, 2007 4:17 am Post subject: Re: Trailering a Kolb

For some reason I could only get one image to attach.  So here is another one.  Wings were hung with foam, carpet and 1" nylon safety straps.  Wheels chocked and boom put on a rest.

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

P5220085.JPG

Description:

Filesize:

845.63 KB

Viewed:

580 Time(s)

Tom O'Hara

Joined: 26 Jan 2006
Posts: 34

Posted: Thu Oct 25, 2007 4:20 am Post subject: Re: Trailering a Kolb

Last one. That's me on the left and Dick Neitzel, builder, on the right.

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

P5220086.JPG

Description:

Filesize:

662.56 KB

Viewed:

526 Time(s)

Dave Bigelow

Joined: 29 Jan 2006
Posts: 103
Location: Kamuela, Hawaii

Posted: Fri Oct 26, 2007 11:17 pm Post subject: Re: Trailering a Kolb

A simple way to take the load off the tail wheel and the wing fold tube when trailering is to put an inner tube between the trailer bed and the leading edges of the wing in the area of the wing fold tube.  Tie down the tail wheel to the trailer and then inflate the tube.  Inflate the tube enough to remove about half (or a little more) of the weight from the tail wheel.  You get a spring effect from the inflated tube and the tailwheel strut, but not enough to bend things.  You can put a piece of plastic sheet or a soft piece of fabric between the tube and the LE of the wings to prevent chafing.



This has worked pretty well for me, but I haven't trailed thousands of miles like some on this list have.

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
Dave Bigelow
Kamuela, Hawaii
FS2, HKS 700E

gaman(at)att.net
Guest

Posted: Sat Oct 27, 2007 5:27 am Post subject: Trailering a Kolb

Simple is better when it comes to trailering.I have a picture of a support system on Barnstormers for a Firestar under fs 2 w/custom trlr.The smoothest ride in a trailer is the mid point between the trailer axles and the towing unit rear axle.Back it in, anchor the tires and let the aircraft suspension work.Put the tube support in the mid point.It removes all shock loads from the tube.



Dave Bigelow <up_country(at)hotmail.com> wrote:[quote] --> Kolb-List message posted by: "Dave Bigelow" 



A simple way to take the load off the tail wheel and the wing fold tube when trailering is to put an inner tube between the trailer bed and the leading edges of the wing in the area of the wing fold tube.  Tie down the tail wheel to the trailer and then inflate the tube.  Inflate the tube enough to remove about half (or a little [quote][b]

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Kolb-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum