Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

LED strobes, etc.

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

armywrights(at)adelphia.n
Guest

Posted: Thu Feb 23, 2006 3:34 pm Post subject: LED strobes, etc.

All, I’m not looking to wire together my own nav lights that include the strobe tube, so I asked Eric at Perihelion:  

   

Rob,  

    

   

    

(Sorry for the late reply).  

    

   

    

I am planning a combo this Spring. No firm delivery date yet.  

    

   

    

Regards,

 Eric M. Jones

 emjones(at)charter.net (emjones(at)charter.net)

 www.PerihelionDesign.com

 113 Brentwood Drive

 Southbridge MA 01550-2705

 (508) 764-2072  

   	  Quote: 	
		      

   

    

   

  

Eric,  

   

I still check the sites consistently looking for anyone who will put together a combo tail light/strobe for use specifically in the RV-10 as a direct replacement for the System 6 Vans sells from Whelen.  I really don’t want to have LED side posn lights and a filament tail light.  I’m not in a hurry but will probably buy the first set I see.  Would like that to be you as you support the matronics lists, AeroLectric readers, etc.  

   

Rob Wright

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Deems Davis

Joined: 09 Jan 2006
Posts: 925

Posted: Thu Feb 23, 2006 6:07 pm Post subject: LED strobes, etc.

I just installed these. http://deemsrv10.com/decisions.html (scroll down 

to the write up on the LED Nav & Strobes)

I found them on Vans Air Force site, and RV 7 builder made them, the 

links are in the write-up if anybody's interested.

Deems Davis # 406

Fuse

http://deemsrv10.com/

Robert G. Wright wrote:



 	  Quote: 	
		   All, I’m not looking to wire together my own nav lights that include 

 the strobe tube, so I asked Eric at Perihelion:



 Rob,



 (Sorry for the late reply).



 I am planning a combo this Spring. No firm delivery date yet.



 Regards,

 Eric M. Jones

 emjones(at)charter.net <mailto:emjones(at)charter.net>

 www.PerihelionDesign.com <http://www.PerihelionDesign.com>

 113 Brentwood Drive

 Southbridge MA 01550-2705

 (508) 764-2072



     Eric,



     I still check the sites consistently looking for anyone who will

     put together a combo tail light/strobe for use specifically in the

     RV-10 as a direct replacement for the System 6 Vans sells from

     Whelen. I really don’t want to have LED side posn lights and a

     filament tail light. I’m not in a hurry but will probably buy the

     first set I see. Would like that to be you as you support the

     matronics lists, AeroLectric readers, etc.



     Rob Wright

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Tim(at)MyRV10.com
Guest

Posted: Thu Feb 23, 2006 8:00 pm Post subject: LED strobes, etc.

Deems,

Those are really beautiful.  You did a great job.  Some day if I get

tired of mine, I'll give you some cash and you can make me a set. 

Tim



Tim Olson - RV-10 N104CD - Flying

do not archive

Deems Davis wrote:

 	  Quote: 	
		   

 

 I just installed these. http://deemsrv10.com/decisions.html (scroll down 

 to the write up on the LED Nav & Strobes)

 I found them on Vans Air Force site, and RV 7 builder made them, the 

 links are in the write-up if anybody's interested.

 

 

 Deems Davis # 406

 Fuse

 http://deemsrv10.com/

 

 

 Robert G. Wright wrote:

 

> All, I’m not looking to wire together my own nav lights that include 

> the strobe tube, so I asked Eric at Perihelion:

>

> Rob,

>

> (Sorry for the late reply).

>

> I am planning a combo this Spring. No firm delivery date yet.

>

> Regards,

> Eric M. Jones

> emjones(at)charter.net <mailto:emjones(at)charter.net>

> www.PerihelionDesign.com <http://www.PerihelionDesign.com>

> 113 Brentwood Drive

> Southbridge MA 01550-2705

> (508) 764-2072

>

>     Eric,

>

>     I still check the sites consistently looking for anyone who will

>     put together a combo tail light/strobe for use specifically in the

>     RV-10 as a direct replacement for the System 6 Vans sells from

>     Whelen. I really don’t want to have LED side posn lights and a

>     filament tail light. I’m not in a hurry but will probably buy the

>     first set I see. Would like that to be you as you support the

>     matronics lists, AeroLectric readers, etc.

>

>     Rob Wright

>

 

 

 

 

 http://www.matronics.com/Navigator?RV10-List

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Deems Davis

Joined: 09 Jan 2006
Posts: 925

Posted: Thu Feb 23, 2006 8:31 pm Post subject: LED strobes, etc.

Just to clarify, I didn't make them,  (but wish I had!) an RV 7 builder 

named Jeff Bordelon made them, I found them on one of the posts on Doug 

Reeves site, and contacted him and he agreed to make me a set. It's the 

1st RV-10 set he's done.  The Nav lights and the strobes along with the 

power supplies for the nav lights was $300. I felt that was more than 

reasonable, compared to what I'd seen advertised just for the LED nav 

light from other sources. It did cause me to change from Van's lighting 

(wingtip) to Duckworks, but I'm also happy with that as well.



Deems Davis # 406

Fuse

http://deemsrv10.com/



Tim Olson wrote:



 	  Quote: 	
		   



 Deems,

 Those are really beautiful.  You did a great job.  Some day if I get

 tired of mine, I'll give you some cash and you can make me a set. 

 Tim



 Tim Olson - RV-10 N104CD - Flying

 do not archive

 Deems Davis wrote:



> 

>

> I just installed these. http://deemsrv10.com/decisions.html (scroll 

> down to the write up on the LED Nav & Strobes)

> I found them on Vans Air Force site, and RV 7 builder made them, the 

> links are in the write-up if anybody's interested.

> Deems Davis # 406

> Fuse

> http://deemsrv10.com/

> Robert G. Wright wrote:

>

>> All, I’m not looking to wire together my own nav lights that include 

>> the strobe tube, so I asked Eric at Perihelion:

>>

>> Rob,

>>

>> (Sorry for the late reply).

>>

>> I am planning a combo this Spring. No firm delivery date yet.

>>

>> Regards,

>> Eric M. Jones

>> emjones(at)charter.net <mailto:emjones(at)charter.net>

>> www.PerihelionDesign.com <http://www.PerihelionDesign.com>

>> 113 Brentwood Drive

>> Southbridge MA 01550-2705

>> (508) 764-2072

>>

>>     Eric,

>>

>>     I still check the sites consistently looking for anyone who will

>>     put together a combo tail light/strobe for use specifically in the

>>     RV-10 as a direct replacement for the System 6 Vans sells from

>>     Whelen. I really don’t want to have LED side posn lights and a

>>     filament tail light. I’m not in a hurry but will probably buy the

>>     first set I see. Would like that to be you as you support the

>>     matronics lists, AeroLectric readers, etc.

>>

>>     Rob Wright

>>

>

>

> http://www.matronics.com/Navigator?RV10-List

>



 http://www.matronics.com/Navigator?RV10-List

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

acs(at)acspropeller.com.a
Guest

Posted: Thu Feb 23, 2006 8:35 pm Post subject: LED strobes, etc.

Deems,



Your light setup looks fantastic!

What I'm interested in though, is a reference you make on your site to

building your own fiberglass instrument panel. Have you progressed with this

as yet?

I'm curious as I can't seem to get much feedback on the commercially

available units and am thinking along the same lines of making my own.



John #40315 Fuse.

Do not archive



--

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum