Matronics Email Lists :: View topic - Van's vents in 601 HD?Van's vents in 601 HD?

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Van's vents in 601 HD?Van's vents in 601 HD?

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

pbaker4(at)windstream.net
Guest

Posted: Tue Nov 13, 2007 12:19 pm Post subject: Van's vents in 601 HD?Van's vents in 601 HD?

I installed the Van nasa inlets and vents in  my601HD. that took care of the cooling of me. But I have a problem  cooling

 my oil. I purchased the plane last fall and had a  problem all

 summer. The oil would sometimes get to 250 and that  is not

 good.The oil cooler is located at the bottom of the  firewall and is fed air through the nasa vent on the side. I even  put

 a scoop to catch more air.Lockwood said the oil  cooler is large enouth to do the job.An oil thermostat is installed and  

 they said that would not effect the cooler.Sooo..I  need help.

 As a last resort, I could cut a hole in the front  of the cowling

 below the water cooler and mount it there. I am  open to suggestions...Anyone?

  

 thanks..paul baker   601hd 210 hrs.on  912

   [quote][b]

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

entecrj(at)sbcglobal.net
Guest

Posted: Tue Nov 13, 2007 1:06 pm Post subject: Van's vents in 601 HD?Van's vents in 601 HD?

Subject: Re: Van's vents in 601 HD?Van's vents in 601  HD?

 [quote]   



   I installed the Van nasa inlets and vents in    my601HD. that took care of the cooling of me. But I have a problem    cooling

   my oil. I purchased the plane last fall and had a    problem all

   summer. The oil would sometimes get to 250 and    that is not

   good.The oil cooler is located at the bottom of    the firewall and is fed air through the nasa vent on the side. I even    put

   a scoop to catch more air.Lockwood said the oil    cooler is large enouth to do the job.An oil thermostat is installed and    

   they said that would not effect the    cooler.Sooo..I need help.

   As a last resort, I could cut a hole in the front    of the cowling

   below the water cooler and mount it there. I am    open to suggestions...Anyone?

    

   thanks..paul baker   601hd 210 hrs.on    912

    

   +++++++++++++++++++++

    

   Is the outlet opening equal to or greater than    the total inlet area?

   If not the air could be stagnating inside the    cowling.

    

   R. Johnson 

[b]

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum