Matronics Email Lists :: View topic - pg 20-6 inboard bottom wing skin nutplate

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

pg 20-6 inboard bottom wing skin nutplate

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

jchang10

Joined: 05 Jul 2006
Posts: 227

Posted: Thu Nov 22, 2007 8:33 am Post subject: pg 20-6 inboard bottom wing skin nutplate

Happy thanksgiving! i know it's a holiday, because i always end up with 

a problem on the start of a holiday.



http://www.jline.com/log/aviation/build/airframe/wings/photos/sec20/IMG_5509.html

http://www.jline.com/log/aviation/build/airframe/wings/photos/sec20/IMG_5510.html



The above photos show the bottom inboard wing rib. You can see where one 

of the nutplate hole patterns in the skin, lines up right between a 

notch in the rib flange.



On page 20-6, it calls for a K1100-08 here, which matches the hole 

pattern pre-punched into the bottom skin, but this will make for an 

awkward rivet in the notch without a shim or another type of nutplate.



Nothing in the archives about this. What am i missing or did i do wrong?



Jae

40533 - back to the wings

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
#40533 RV-10
First flight 10/19/2011
Phase 1 Done 11/26/2011

n8vim(at)arrl.net
Guest

Posted: Thu Nov 22, 2007 8:50 am Post subject: pg 20-6 inboard bottom wing skin nutplate

Here's a photo of mine; I was told to just rivet it (the rivet will expand slightly):

 

 

 [img]cid:part1.07070904.04040503(at)arrl.net[/img]

 

 -Jim 40384

 

 Jae Chang wrote:  	  Quote: 	
		  --> RV10-List message posted by: Jae Chang <jc-matronics_rv10(at)jline.com> (jc-matronics_rv10(at)jline.com)   

   

 Happy thanksgiving! i know it's a holiday, because i always end up with a problem on the start of a holiday.   

   

 http://www.jline.com/log/aviation/build/airframe/wings/photos/sec20/IMG_5509.html   

 http://www.jline.com/log/aviation/build/airframe/wings/photos/sec20/IMG_5510.html   

   

 The above photos show the bottom inboard wing rib. You can see where one of the nutplate hole patterns in the skin, lines up right between a notch in the rib flange.   

   

 On page 20-6, it calls for a K1100-08 here, which matches the hole pattern pre-punched into the bottom skin, but this will make for an awkward rivet in the notch without a shim or another type of nutplate.   

   

 Nothing in the archives about this. What am i missing or did i do wrong?   

   

 Jae   

 40533 - back to the wings

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

nutplate.jpg

Description:

Filesize:

56.63 KB

Viewed:

283 Time(s)

drfred(at)suddenlinkmail.
Guest

Posted: Fri Nov 23, 2007 9:02 am Post subject: pg 20-6 inboard bottom wing skin nutplate

Jae;



I went out and looked at my wings.  Did the same thing.  Just put the 

nut plate over the end of the gap.  Just like Mr Hein's pics. 



Fred

40515. 

Having fun with fiberglass.  .......

ae Chang wrote:

 	  Quote: 	
		   



 Happy thanksgiving! i know it's a holiday, because i always end up 

 with a problem on the start of a holiday.



 http://www.jline.com/log/aviation/build/airframe/wings/photos/sec20/IMG_5509.html 



 http://www.jline.com/log/aviation/build/airframe/wings/photos/sec20/IMG_5510.html 

 The above photos show the bottom inboard wing rib. You can see where 

 one of the nutplate hole patterns in the skin, lines up right between 

 a notch in the rib flange.



 On page 20-6, it calls for a K1100-08 here, which matches the hole 

 pattern pre-punched into the bottom skin, but this will make for an 

 awkward rivet in the notch without a shim or another type of nutplate.



 Nothing in the archives about this. What am i missing or did i do wrong?



 Jae

 40533 - back to the wings

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

jchang10

Joined: 05 Jul 2006
Posts: 227

Posted: Fri Nov 23, 2007 3:32 pm Post subject: pg 20-6 inboard bottom wing skin nutplate

ok, thanks James and Fred for confirming!



Jae - 40533

do not archive



Fred Williams, M.D. wrote:

 	  Quote: 	
		   

 <drfred(at)suddenlinkmail.com>



 Jae;



 I went out and looked at my wings.  Did the same thing.  Just put the 

 nut plate over the end of the gap.  Just like Mr Hein's pics.

 Fred

 40515. Having fun with fiberglass.  .......

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
#40533 RV-10
First flight 10/19/2011
Phase 1 Done 11/26/2011

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum