 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
wcurtis(at)nerv10.com
Guest
|
 Posted: Sat Dec 08, 2007 7:32 am Post subject: Garmin 430w/530w version 3.0 software now available |
 |
|
For those that have Garmin 430w/530w navigators, version 3.0 software release (SB 07040 rev A) is now available.
RE: New Garmin V 3.0 Software release. Service Bulletin N0. 0740 Rev A Garmin has released two new software updates for 400W and 500W series units (i.e. 400W, 420W, 430W, 500W, 530W, ect).
These software updates are for the GPS sub assemble and for the main processor sub assembly. These updates can be performed by Garmin dealers in the field and should take about 1 hour to complete. Along with the new software update you will receive a new POH supplement.
This is a no charge update and Garmin has marked this update as Mandatory. Here is a list of the changes the new update will address:
. Added the ability to load an arrival or departure without first removing existing arrival or departure, addressing the issue described in Service Alert 070227-00
. Corrected compatibility issue with WX500 Storm scope identified in Installation Bulletin 0711
. Reduced TAWS nuisance alerts for circling approaches
. Added ability to store and remotely tune up to 15 radio channels
. Added XM weather products: Lightning, Cell Movement, and Winds Aloft
. Added compatibility with Avidyne product's: EXP5000 PFD, EX5000 MFD and EX500 MFD
. Added capability to display vertical GPS approach guidance on Honeywell EFS 40/50
. Added capability to display traffic from Honeywell KMH 980 (KMH 920) and KTA 970 (KTA 910)
. Improved prompting for course reversals at IAF transitions on approach
. Improved Auto-Zoom functionality
. Improved VNAV functionality during holds
. Corrected the operation of the E6B winds aloft calculation on Winds page
. Unit now retains user settings on NAV1 page over a power cycle (400W series units)
. Unit now starts up in last mode used (GPS or VLOC) instead of reverting to GPS mode at startup
. Corrected issue of intermittent screen flashing
William
http://wcurtis.nerv10.com/
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
flysrv10(at)gmail.com
Guest
|
| Posted: Tue Dec 11, 2007 3:35 pm Post subject: Garmin 430w/530w version 3.0 software now available |
|
|
Thanks for the post. I have scheduled mine for update. Wonder why I
have not been contacted by Garmin or my dealer!
Rob.
Do not archive.
On Dec 8, 2007, at 10:39 AM, William Curtis wrote:
| Quote: |
For those that have Garmin 430w/530w navigators, version 3.0
software release (SB 07040 rev A) is now available.
RE: New Garmin V 3.0 Software release. Service Bulletin N0. 0740 Rev
A Garmin has released two new software updates for 400W and 500W
series units (i.e. 400W, 420W, 430W, 500W, 530W, ect).
These software updates are for the GPS sub assemble and for the main
processor sub assembly. These updates can be performed by Garmin
dealers in the field and should take about 1 hour to complete. Along
with the new software update you will receive a new POH supplement.
This is a no charge update and Garmin has marked this update as
Mandatory. Here is a list of the changes the new update will address:
. Added the ability to load an arrival or departure without first
removing existing arrival or departure, addressing the issue
described in Service Alert 070227-00
. Corrected compatibility issue with WX500 Storm scope identified in
Installation Bulletin 0711
. Reduced TAWS nuisance alerts for circling approaches
. Added ability to store and remotely tune up to 15 radio channels
. Added XM weather products: Lightning, Cell Movement, and Winds Aloft
. Added compatibility with Avidyne product's: EXP5000 PFD, EX5000
MFD and EX500 MFD
. Added capability to display vertical GPS approach guidance on
Honeywell EFS 40/50
. Added capability to display traffic from Honeywell KMH 980 (KMH
920) and KTA 970 (KTA 910)
. Improved prompting for course reversals at IAF transitions on
approach
. Improved Auto-Zoom functionality
. Improved VNAV functionality during holds
. Corrected the operation of the E6B winds aloft calculation on
Winds page
. Unit now retains user settings on NAV1 page over a power cycle
(400W series units)
. Unit now starts up in last mode used (GPS or VLOC) instead of
reverting to GPS mode at startup
. Corrected issue of intermittent screen flashing
William
http://wcurtis.nerv10.com/
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
wcurtis(at)nerv10.com
Guest
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
