Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Saturday

Matronics Email Lists Forum Index -> RVSouthEast-List

View previous topic :: View next topic

Author Message

willfly(at)carolina.rr.co
Guest

Posted: Fri Jan 06, 2006 5:54 pm Post subject: Saturday



Weather is good for Saturday. Who want to play and where?

Cappy

sawad13(at)msn.com
Guest

Posted: Fri Jan 06, 2006 7:10 pm Post subject: Saturday



I hope to be out at Goose Creek later in the afternoon. I need to change my

tires on my RV-4 and don't have a clue as how to jack the thing up off the

ground to take the wheels off. If your really bored and want to stop by...

come on over! I won't be out there till probably sometime after 2pm.

Ron Awad

 	  Quote: 	
		  From: "Steve Glasgow" <willfly(at)carolina.rr.com>

Reply-To: rvsoutheast-list(at)matronics.com

To: "SERV" <rvsoutheast-list(at)matronics.com>

Subject: RVSouthEast-List: Saturday

Date: Fri, 6 Jan 2006 20:54:03 -0500

<willfly(at)carolina.rr.com>

Weather is good for Saturday. Who want to play and where?

Cappy

jclarkmail(at)gmail.com
Guest

Posted: Fri Jan 06, 2006 7:18 pm Post subject: Saturday



If you get to Columbia by 11:45, you can go with us for BBQ.

James

On 1/6/06, Steve Glasgow <willfly(at)carolina.rr.com> wrote:

 	  Quote: 	
		  

willfly(at)carolina.rr.com>

Weather is good for Saturday. Who want to play and where?

Cappy

	


--

This is an alternate email. Please continue to email me at

james(at)nextupventures.com .

WVSWIFT(at)aol.com
Guest

Posted: Fri Jan 06, 2006 7:21 pm Post subject: Saturday



Ron:

General Waskow at Bradford in Huntersville has a neat jack for the RV4.

Jacks only one at a time by threaded rod.

Eddie Shields

Larry(at)bowenaero.com
Guest

Posted: Fri Jan 06, 2006 7:26 pm Post subject: Saturday



There is an offer you shouldn't refuse!

-

Larry Bowen

Larry(at)BowenAero.com

http://BowenAero.com

bill28104(at)yahoo.com
Guest

Posted: Fri Jan 06, 2006 7:36 pm Post subject: Saturday



hey Ron, I ordered a jack for rv's. should arrive

next week. if you can wait, you can use it. bill

--- Ron and Shannon AWAD <sawad13(at)msn.com> wrote:

Shannon AWAD" <sawad13(at)msn.com>

sawad13(at)msn.com
Guest

Posted: Fri Jan 06, 2006 7:36 pm Post subject: Saturday



Where does it jack the plane up at? The tie down eyebolts???

Ron Awad

 	  Quote: 	
		  From: WVSWIFT(at)aol.com

Reply-To: rvsoutheast-list(at)matronics.com

To: rvsoutheast-list(at)matronics.com

Subject: Re: RVSouthEast-List: Saturday

Date: Fri, 6 Jan 2006 22:21:39 EST

Ron:

General Waskow at Bradford in Huntersville has a neat jack for the RV4.

Jacks only one at a time by threaded rod.

Eddie Shields

	


http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/

sawad13(at)msn.com
Guest

Posted: Fri Jan 06, 2006 7:41 pm Post subject: Saturday



Could I just lift the plane up off the ground by the engine mount with a

Chain fall??? I may end up waiting till I get use of a proper jack but my

tires got alot of wear and tear on my trip to Florida last weekend and the

tires now are BALD BALD BALD!!!! I would like to change them out before I

fly it again.

Ron Awad

 	  Quote: 	
		  From: bill crothers <bill28104(at)yahoo.com>

Reply-To: rvsoutheast-list(at)matronics.com

To: rvsoutheast-list(at)matronics.com

Subject: RE: RVSouthEast-List: Saturday

Date: Fri, 6 Jan 2006 19:36:22 -0800 (PST)

hey Ron, I ordered a jack for rv's. should arrive

next week. if you can wait, you can use it. bill

--- Ron and Shannon AWAD <sawad13(at)msn.com> wrote:

> Shannon AWAD" <sawad13(at)msn.com>

>

> I hope to be out at Goose Creek later in the

> afternoon. I need to change my

> tires on my RV-4 and don't have a clue as how to

> jack the thing up off the

> ground to take the wheels off. If your really bored

> and want to stop by...

> come on over! I won't be out there till probably

> sometime after 2pm.

>

> Ron Awad

>

> >From: "Steve Glasgow" <willfly(at)carolina.rr.com>

> >Reply-To: rvsoutheast-list(at)matronics.com

> >To: "SERV" <rvsoutheast-list(at)matronics.com>

> >Subject: RVSouthEast-List: Saturday

> >Date: Fri, 6 Jan 2006 20:54:03 -0500

> >

> Glasgow"

> ><willfly(at)carolina.rr.com>

> >

> >Weather is good for Saturday. Who want to play and

> where?

> >

> >Cappy

> >

> >

> >

> >

> >

> >

> >

> >

> >

> >

> >

> browse

> Subscriptions page,

> FAQ,

> http://www.matronics.com/Navigator?RVSouthEast-List

>

> Admin.

>

>

	


http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/

tadsargent(at)bellsouth.n
Guest

Posted: Fri Jan 06, 2006 7:57 pm Post subject: Saturday

Ron I'll be there tomorrow with instructions how to remove tires. Also use Bill's jack it is safer, unless you want to take the cowl off. Also the method you are thinking of may spin the a/c around.

 	  Quote: 	

From: "Ron and Shannon AWAD" <sawad13(at)msn.com>

Date: 2006/01/06 Fri PM 10:41:17 EST

To: rvsoutheast-list(at)matronics.com

Subject: RE: RVSouthEast-List: Saturday

- The Matronics RVSouthEast-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RVSouthEast-List

sportav8r(at)aol.com
Guest

Posted: Fri Jan 06, 2006 8:24 pm Post subject: Saturday



I don't know, Cappy - the voices are telling me to stay home and clean my guns tomorrow...

eanderson(at)carolina.rr.
Guest

Posted: Fri Jan 06, 2006 8:34 pm Post subject: Saturday



Ron, I have a clamp that you clamp to the lower leg (near the brake) and

then use a car jack to lift the axle. Got both out at the Hanger. But the

screw jack of Bill's might be easier.

Ed

sawad13(at)msn.com
Guest

Posted: Fri Jan 06, 2006 8:57 pm Post subject: Saturday



I will have a look in your hangar for the clamp

Ron Awad

 	  Quote: 	
		  From: "Ed Anderson" <eanderson(at)carolina.rr.com>

Reply-To: rvsoutheast-list(at)matronics.com

To: <rvsoutheast-list(at)matronics.com>

Subject: Re: RVSouthEast-List: Saturday

Date: Fri, 6 Jan 2006 23:34:12 -0500

<eanderson(at)carolina.rr.com>

Ron, I have a clamp that you clamp to the lower leg (near the brake) and

then use a car jack to lift the axle. Got both out at the Hanger. But the

screw jack of Bill's might be easier.

Ed

- The Matronics RVSouthEast-List Email Forum -
 
Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RVSouthEast-List

willfly(at)carolina.rr.co
Guest

Posted: Sat Jan 07, 2006 4:41 am Post subject: Saturday



Thanks for the offer but I made plans to visit Mike Louder's project in Stanley county. Next time for sure.

Cappy

eanderson(at)carolina.rr.
Guest

Posted: Sat Jan 07, 2006 6:45 am Post subject: Saturday



Ron, the clamp is in my tool bag in the aircraft, behind the pilot seat

back. Its a "U" bolt with a piece of Green Angle iron. The "U" bolt has

two nuts on each leg, big nuts are oversized and are simply spacers. Take

nuts off, put "U" bolt around gear leg as close as you can get it to the

brake caliper mount. Put the legs of the "U" bolts through the holes in the

angle iron. Tighten it down Good. The take the car jack and slip it under

the angle iron, jack up the angle iron and gear. If you are going to have

the wheel off a while I would put a block of wood under the axle.

Car jack is beside the storage cabinet.

Remember you will have to disassembly your brake caliper - otherwise the

rotor will keep you from pulling the wheel off after you remove the axle

nut.

Ed

WVSWIFT(at)aol.com
Guest

Posted: Sat Jan 07, 2006 6:53 am Post subject: Saturday



It picks up at the axle. Real neat and small to carry in plane.

Eddie

sawad13(at)msn.com
Guest

Posted: Sat Jan 07, 2006 7:23 am Post subject: Saturday



Thanks Eddie, will have to pull the pants off and take a look later today.

Ron Awad

 	  Quote: 	
		  From: WVSWIFT(at)aol.com

Reply-To: rvsoutheast-list(at)matronics.com

To: rvsoutheast-list(at)matronics.com

Subject: Re: RVSouthEast-List: Saturday

Date: Sat, 7 Jan 2006 09:53:25 EST

It picks up at the axle. Real neat and small to carry in plane.

Eddie

RV8 tail section done

RV6AN25EH(at)aol.com
Guest

Posted: Sat Jan 07, 2006 2:43 pm Post subject: Saturday



Hey Ron,

Do not use the engine mount ring to lift the your plane. I have heard of

this breaking the engine case. Note: this ring is to lift the engine only!

Ed Horgan

N25EH

sawad13(at)msn.com
Guest

Posted: Sat Jan 07, 2006 5:31 pm Post subject: Saturday



I was thinking of hooking the chain up to the engine mount itself and

pulling up only on one side at a time, but will try Ed's clampy thing, and

if that doesn't work I will see if I can use the one Eddie mentioned.

Ron Awad

 	  Quote: 	
		  From: RV6AN25EH(at)aol.com

Reply-To: rvsoutheast-list(at)matronics.com

To: rvsoutheast-list(at)matronics.com

Subject: Re: RVSouthEast-List: Saturday

Date: Sat, 7 Jan 2006 17:43:23 EST

Hey Ron,

Do not use the engine mount ring to lift the your plane. I have heard of

this breaking the engine case. Note: this ring is to lift the engine

only!

Ed Horgan

N25EH

Display posts from previous:

	Matronics Email Lists Forum Index -> RVSouthEast-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum