Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Heater installation

Matronics Email Lists Forum Index -> Commander-List

View previous topic :: View next topic

Author Message

moe(at)rosspistons.com
Guest

Posted: Tue Dec 25, 2007 9:07 pm Post subject: Heater installation

Tom,

  

 I have a 680F(p) and have had the heater replaced with one  which is much simpler, better and was cheaper than having the old unit  repaired. It also has no AD notes. The guys are in Michigan that did  the install.  If you are interested I can send pictures and  info.

  

 Regards,

  

 Moe Mills

 N680RR

 680F(p)



   From: owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Tom  Fisher

Sent: Monday, December 24, 2007 6:32 PM

To:  commander-list-digest(at)matronics.com

Subject: Heater  installation

 

 Best of the season to  everyone.

  

 I have to replace my cabin heater in the 680FLP,  (therefore it's the one installed in the back).

 I have the Mr. RPM conversion and am no longer  pressurized, (some of the plumbing for that appears to  be removed).

 The direct replacement for it does not fit at all  so the engineers have put it back in the box and plan on sending my heater with  it so the assembler of the other heater will know what it looks like  and what it has to fit.

  

 My engineers have asked me to get help from you all  in the form of pictures of the duct work that carries the air from the  scoop to the heater as well as any air plumbing in the tail.

  

 Harry, do you have pictures of yours you can  send?

  

 Thanks for anything anyone can  send.

  

 Tom

 C-GISS

 680FLP (Mr.RPM)

[quote]



href="http://www.matronics.com/contribution">http://www.matronics.com/chref="http://www.matronics.com/Navigator?Commander-List">http://www.matronics.com/Navigator?Commander-List

href="http://forums.matronics.com">http://forums.matronics.com



[b]

tfisher(at)commandergroup
Guest

Posted: Tue Dec 25, 2007 9:20 pm Post subject: Heater installation

Wonderful, I would love your information and images to try  and figure this thing out.  Frankly I want to rip all the air-conditioning  and pressure valves units and go simple,  I can't wait to see the info,  thanks.

  

 Tom F.

 tfisher(at)commandergroup.bc.ca (tfisher(at)commandergroup.bc.ca)

 [quote]   ---

kamala(at)MSN.COM
Guest

Posted: Wed Dec 26, 2007 4:49 am Post subject: Heater installation

mm, if you do not mind pls fwd same heater info to me also. gmc



 [quote]  From: tfisher(at)commandergroup.bc.ca

To: commander-list(at)matronics.com

Subject: Re: Heater installation

Date: Tue, 25 Dec 2007 21:19:05 -0800



     Wonderful, I would love your information and images to try and figure this thing out.  Frankly I want to rip all the air-conditioning and pressure valves units and go simple,  I can't wait to see the info, thanks.

  

 Tom F.

 tfisher(at)commandergroup.bc.ca (tfisher(at)commandergroup.bc.ca)

 [quote] ---

dfalik(at)sbcglobal.net
Guest

Posted: Wed Dec 26, 2007 6:31 pm Post subject: Heater installation

I have the same heater that Moe is referring to in my 500S. I have had it for 2 years with no issues at all except I have to remember to remove my coat before flight as it can get mighty toasty.  It is very controllable with nearly unlimited settings.  There are no ads. The company is C&D Associates.  The owner is the designer, fabricator and installer.  I also have the same unit in my Apache.  They are good people to do business with.  

   

Don Falik  

   

--

moe(at)rosspistons.com
Guest

Posted: Thu Dec 27, 2007 9:58 am Post subject: Heater installation

Mason,

  

 Please send me your fax number and I will fax the install  booklet.  My wife returns from back east Sunday with the digital camera, at  which time I will email you  & Tom photos.

  

 Regards,

  

 Moe

  



   From: owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of MASON  CHEVAILLIER

Sent: Wednesday, December 26, 2007 4:49 AM

To:  commander-list(at)matronics.com

Subject: RE: Heater  installation

 

mm, if you do not mind pls fwd same heater info to me also.  gmc



 [quote]      From: tfisher(at)commandergroup.bc.ca

To:    commander-list(at)matronics.com

Subject: Re: Heater    installation

Date: Tue, 25 Dec 2007 21:19:05 -0800



          Wonderful, I would love your information and images to    try and figure this thing out.  Frankly I want to rip all the    air-conditioning and pressure valves units and go simple,  I can't wait    to see the info, thanks.

    

   Tom F.

   tfisher(at)commandergroup.bc.ca (tfisher(at)commandergroup.bc.ca)

   [quote]     ---

moe(at)rosspistons.com
Guest

Posted: Thu Dec 27, 2007 10:00 am Post subject: Heater installation

Tom,

  

 Please email me your fax number and I will fax the install  instructions, ect.  My wife has the digital camera back east and will not  get home until Sunday, at which time I will take several photos and email them  to you.

  

 Regards,

  

 Moe

  



   From: owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Tom  Fisher

Sent: Tuesday, December 25, 2007 9:19 PM

To:  commander-list(at)matronics.com

Subject: Re: Heater  installation

 

 Wonderful, I would love your information and images to try  and figure this thing out.  Frankly I want to rip all the air-conditioning  and pressure valves units and go simple,  I can't wait to see the info,  thanks.

  

 Tom F.

 tfisher(at)commandergroup.bc.ca (tfisher(at)commandergroup.bc.ca)

 [quote]   ---

tfisher(at)commandergroup
Guest

Posted: Thu Dec 27, 2007 10:15 am Post subject: Heater installation

Great !

 I will go load it up with paper.

 Fax: 604-274-1231

 Tom

 [quote]   ---

moe(at)rosspistons.com
Guest

Posted: Thu Dec 27, 2007 10:17 am Post subject: Heater installation

Tom,

  

 Please send me your FAX number and I will fax the install  booklet ect.  My wife will return from back east Sunday with the digital  camera, at which time I will make severa pictures and email them to  you.

  

 Regards,

  

 Moe

  



   From: owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Tom  Fisher

Sent: Tuesday, December 25, 2007 9:19 PM

To:  commander-list(at)matronics.com

Subject: Re: Heater  installation

 

 Wonderful, I would love your information and images to try  and figure this thing out.  Frankly I want to rip all the air-conditioning  and pressure valves units and go simple,  I can't wait to see the info,  thanks.

  

 Tom F.

 tfisher(at)commandergroup.bc.ca (tfisher(at)commandergroup.bc.ca)

 [quote]   ---

tfisher(at)commandergroup
Guest

Posted: Thu Dec 27, 2007 11:03 am Post subject: Heater installation

I'll try again, FAX = 604-274-1281

 Tom...

 [quote]   ---

nico(at)cybersuperstore.c
Guest

Posted: Thu Dec 27, 2007 12:03 pm Post subject: Heater installation

Is this something that could benefit other Commander  owners? If so, we could put it up on the website, if you want  to.

 Let me know

 Thanks

 Nico

  



   From: owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Moe -  Ross Racing Pistons

Sent: Thursday, December 27, 2007 9:44  AM

To: commander-list(at)matronics.com

Subject: RE:  Heater installation

 

 Tom,

  

 Please send me your FAX number and I will fax the install  booklet ect.  My wife will return from back east Sunday with the digital  camera, at which time I will make severa pictures and email them to  you.

  

 Regards,

  

 Moe

  



   From: owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Tom  Fisher

Sent: Tuesday, December 25, 2007 9:19 PM

To:  commander-list(at)matronics.com

Subject: Re: Heater  installation

 

 Wonderful, I would love your information and images to try  and figure this thing out.  Frankly I want to rip all the air-conditioning  and pressure valves units and go simple,  I can't wait to see the info,  thanks.

  

 Tom F.

 tfisher(at)commandergroup.bc.ca (tfisher(at)commandergroup.bc.ca)

 [quote]   ---

nick(at)container.com
Guest

Posted: Thu Dec 27, 2007 12:17 pm Post subject: Heater installation

Nico   

Where is the web site?   

   

     

From: owner-commander-list-server(at)matronics.com [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of nico css

 Sent: Thursday, December 27, 2007 12:02 PM

 To: commander-list(at)matronics.com

 Subject: RE: Commander-List: Heater installation  

  

   

Is this something that could benefit other Commander owners? If so, we could put it up on the website, if you want to.  

Let me know  

Thanks  

Nico  

   

       

  

From: owner-commander-list-server(at)matronics.com [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Moe - Ross Racing Pistons

 Sent: Thursday, December 27, 2007 9:44 AM

 To: commander-list(at)matronics.com

 Subject: RE: Commander-List: Heater installation  

Tom,  

   

Please send me your FAX number and I will fax the install booklet ect.  My wife will return from back east Sunday with the digital camera, at which time I will make severa pictures and email them to you.  

   

Regards,  

   

Moe  

   

       

  

From: owner-commander-list-server(at)matronics.com [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Tom Fisher

 Sent: Tuesday, December 25, 2007 9:19 PM

 To: commander-list(at)matronics.com

 Subject: Re: Commander-List: Heater installation    

Wonderful, I would love your information and images to try and figure this thing out.  Frankly I want to rip all the air-conditioning and pressure valves units and go simple,  I can't wait to see the info, thanks.  

    

   

    

Tom F.  

    

tfisher(at)commandergroup.bc.ca (tfisher(at)commandergroup.bc.ca)  

  [quote]    

---

nico(at)cybersuperstore.c
Guest

Posted: Thu Dec 27, 2007 12:33 pm Post subject: Heater installation

www.aerocommander.com

  

 I need to take off the 2007 fly-in announcement, but  otherwise it should be in a workable state. 

 We can add the heater stuff to the Maintenance section off  the main menu on the left-hand side. 

 Let me know if you find any discrepancies.  

  

 Thanks

 Nico

  



   From: owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Nick  Martin

Sent: Thursday, December 27, 2007 12:18 PM

To:  commander-list(at)matronics.com

Subject: RE: Heater  installation

 

  

Nico   

Where is the web site?   

  

   

From:  owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of nico css

Sent: Thursday, December 27, 2007 12:02  PM

To:  commander-list(at)matronics.com

Subject: RE: Heater  installation

 

  

Is this something that  could benefit other Commander owners? If so, we could put it up on the website,  if you want to. 

Let me  know 

Thanks 

Nico 

  

    

 

From:  owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Moe - Ross Racing  Pistons

Sent: Thursday,  December 27, 2007 9:44 AM

To:  commander-list(at)matronics.com

Subject: RE: Heater  installation 

Tom, 

  

Please send me your FAX  number and I will fax the install booklet ect.  My wife will return from  back east Sunday with the digital camera, at which time I will make severa  pictures and email them to you. 

  

Regards, 

  

Moe 

  

    

 

From:  owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Tom Fisher

Sent: Tuesday, December 25, 2007 9:19  PM

To:  commander-list(at)matronics.com

Subject: Re: Heater  installation  

Wonderful, I would love your  information and images to try and figure this thing out.  Frankly I want to  rip all the air-conditioning and pressure valves units and go simple,  I  can't wait to see the info, thanks.

  

 

  

Tom  F.

  

tfisher(at)commandergroup.bc.ca (tfisher(at)commandergroup.bc.ca)

 [quote]      

---

John Vormbaum

Joined: 21 Aug 2006
Posts: 273
Location: SF Bay Area, CA

Posted: Thu Dec 27, 2007 1:11 pm Post subject: Heater installation

Nico,



The company everyone is talking about can be found at 

http://www.aircraftheater.com/



I think they're the same guys who came to Dayton and gave a great talk 

on aircraft heater function, the weak & strong points of the Janitrols, 

and the strengths of their replacement units.



/J



nico css wrote:

[quote] Is this something that could benefit other Commander owners? If so, we 

 could put it up on the website, if you want to.

 Let me know

 Thanks

 Nico

  



 ------------------------------------------------------------------------

 *From:* owner-commander-list-server(at)matronics.com 

 [mailto:owner-commander-list-server(at)matronics.com] *On Behalf Of *Moe 

 - Ross Racing Pistons

 *Sent:* Thursday, December 27, 2007 9:44 AM

 *To:* commander-list(at)matronics.com

 *Subject:* RE: Heater installation



 Tom,

  

 Please send me your FAX number and I will fax the install booklet 

 ect.  My wife will return from back east Sunday with the digital 

 camera, at which time I will make severa pictures and email them to you.

  

 Regards,

  

 Moe

  



 ------------------------------------------------------------------------

 *From:* owner-commander-list-server(at)matronics.com 

 [mailto:owner-commander-list-server(at)matronics.com] *On Behalf Of *Tom 

 Fisher

 *Sent:* Tuesday, December 25, 2007 9:19 PM

 *To:* commander-list(at)matronics.com

 *Subject:* Re: Heater installation



 Wonderful, I would love your information and images to try and figure 

 this thing out.  Frankly I want to rip all the air-conditioning and 

 pressure valves units and go simple,  I can't wait to see the info, 

 thanks.

  

 Tom F.

 tfisher(at)commandergroup.bc.ca <mailto:tfisher(at)commandergroup.bc.ca>



     ---

nico(at)cybersuperstore.c
Guest

Posted: Thu Dec 27, 2007 3:08 pm Post subject: Heater installation

Thanks, John. I'll link their site to ours. It will be the quickest.

--

nico(at)cybersuperstore.c
Guest

Posted: Thu Dec 27, 2007 8:43 pm Post subject: Heater installation

I added C&D Associates to the Maintenance menu.

Thanks

Nico

 



--

Todd.Trainor(at)hp.com
Guest

Posted: Fri Dec 28, 2007 5:49 am Post subject: Heater installation

I  am rather new to this list.  The website looks very nice and appears that  it was updated a few years ago.  (I've been poking around the site for  years, as one of these days I'm going to own an Aero Commander.  I think  the time is soon.)  But I must observe that I thought the website  was abondoned.  There are broken links,  ASP failures, SQL errors on databases lookups, annoucments for dates  that have past, the 520 specifications has been wrong for a long as I can  remember, and there does not appears to be any new content added in a  while.   What are the intentions of this website.  I'd love to  see this website become a great source for Aero  Commander information, such as manuals, photos, stories,  advice, service bulletins, checklists, etc.  

  

 

Todd Trainor, PMP

Project Manager

HP C&I  Storage

810-225-4929   



   From: owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of nico  css

Sent: Thursday, December 27, 2007 3:30 PM

To:  commander-list(at)matronics.com

Subject: RE: Heater  installation

 

 www.aerocommander.com

  

 I need to take off the 2007 fly-in announcement, but  otherwise it should be in a workable state. 

 We can add the heater stuff to the Maintenance section off  the main menu on the left-hand side. 

 Let me know if you find any discrepancies.  

  

 Thanks

 Nico

  



   From: owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Nick  Martin

Sent: Thursday, December 27, 2007 12:18 PM

To:  commander-list(at)matronics.com

Subject: RE: Heater  installation

 

  

Nico   

Where is the web site?   

  

   

From:  owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of nico css

Sent: Thursday, December 27, 2007 12:02  PM

To:  commander-list(at)matronics.com

Subject: RE: Heater  installation

 

  

Is this something that  could benefit other Commander owners? If so, we could put it up on the website,  if you want to. 

Let me  know 

Thanks 

Nico 

  

    

 

From:  owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Moe - Ross Racing  Pistons

Sent: Thursday,  December 27, 2007 9:44 AM

To:  commander-list(at)matronics.com

Subject: RE: Heater  installation 

Tom, 

  

Please send me your FAX  number and I will fax the install booklet ect.  My wife will return from  back east Sunday with the digital camera, at which time I will make severa  pictures and email them to you. 

  

Regards, 

  

Moe 

  

    

 

From:  owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Tom Fisher

Sent: Tuesday, December 25, 2007 9:19  PM

To:  commander-list(at)matronics.com

Subject: Re: Heater  installation  

Wonderful, I would love your  information and images to try and figure this thing out.  Frankly I want to  rip all the air-conditioning and pressure valves units and go simple,  I  can't wait to see the info, thanks.

  

 

  

Tom  F.

  

tfisher(at)commandergroup.bc.ca (tfisher(at)commandergroup.bc.ca)

 [quote]      

---

Display posts from previous:

	Matronics Email Lists Forum Index -> Commander-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum