Matronics Email Lists :: View topic - www.aerocommander.com

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

www.aerocommander.com

Matronics Email Lists Forum Index -> Commander-List

View previous topic :: View next topic

Author Message

barry.collman(at)air-brit
Guest

Posted: Fri Dec 28, 2007 6:17 am Post subject: www.aerocommander.com

Hi Todd,

  

 I haven't looked at the "Models" section of the  Website and you're absolutely right, the details given for the Model 520 are  totally wrong!

  

 In fact, it looks as though most of the  specifications for many of the Models are wrong, and the Specifications for one  Model have been repeated for other Models. The details shown for the Model 520  are, in fact, those for the Model 500 and the Model 520 details appear when  Model 560 is selected!

  

 It looks as though when I get the proverbial 5  minutes, I'll have prepare a new listing for Nico to get the correct details  against each of the Models.

  

 Grateful thanks for pointing this out  Todd!

  

 Barry Collman

UK CommanderLand Rep.

High  Wycombe, England

"Live life on the edge - if you don't take up too much  space"

  

 [quote]   ---

nico(at)cybersuperstore.c
Guest

Posted: Fri Dec 28, 2007 7:17 am Post subject: www.aerocommander.com

You guys are, of course, absolutely right. Sorry about  that. I think I asked for specs for the other models at the time when I built  out the scope of the models but when nothing was forthcoming (I am not pointing  fingers here) it went out of mind. Without specs for some models I merely  duplicated the specs of what I had to 'fill' the pages but it was not meant for  it to remain so for that long. I added the jets and singles onto the site as  well. 

  

 I will post new and updated specs if someone would furnish  them. It is in the plan also that the site's design be altered to make it fit  the viewer's browser so that content can be more productively shown. The models  I show were harvested from all over the 'net and not all of them had the correct  aspect ratio, which explains the distortion on some of them.  

  

 The broken links need to be fixed. 

  

 Thanks

  

 Nico

  

  



   From: owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Barry  Collman

Sent: Friday, December 28, 2007 6:16 AM

To:  commander-list(at)matronics.com

Subject: Commander-List:  www.aerocommander.com

 

 Hi Todd,

  

 I haven't looked at the "Models" section of the  Website and you're absolutely right, the details given for the Model 520 are  totally wrong!

  

 In fact, it looks as though most of the  specifications for many of the Models are wrong, and the Specifications for one  Model have been repeated for other Models. The details shown for the Model 520  are, in fact, those for the Model 500 and the Model 520 details appear when  Model 560 is selected!

  

 It looks as though when I get the proverbial 5  minutes, I'll have prepare a new listing for Nico to get the correct details  against each of the Models.

  

 Grateful thanks for pointing this out  Todd!

  

 Barry Collman

UK CommanderLand Rep.

High  Wycombe, England

"Live life on the edge - if you don't take up too much  space"

  

 [quote]   ---

barry.collman(at)air-brit
Guest

Posted: Fri Dec 28, 2007 8:06 am Post subject: www.aerocommander.com

Hi Nico,

  

 I will get the correct Specs to you, but will  need a little time.

 I may not be able to get round to doing it until  next year 

  

 Let me know what format you want the data in,  plus font and size etc.

  

 Best Regards,

 Barry

 [quote]   ---

jtaddington(at)verizon.ne
Guest

Posted: Fri Dec 28, 2007 8:14 am Post subject: www.aerocommander.com

Nico, I for one appreciate what you have done even though some of it may not be right, and that is because we have not given you the support you needed.  

Keep up the good work.  

Jim Addington  

N444BD  

500A  

         

  

From: owner-commander-list-server(at)matronics.com [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of nico css

 Sent: Friday, December 28, 2007 9:17 AM

 To: commander-list(at)matronics.com

 Subject: RE: Commander-List: www.aerocommander.com  

  

   

You guys are, of course, absolutely right. Sorry about that. I think I asked for specs for the other models at the time when I built out the scope of the models but when nothing was forthcoming (I am not pointing fingers here) it went out of mind. Without specs for some models I merely duplicated the specs of what I had to 'fill' the pages but it was not meant for it to remain so for that long. I added the jets and singles onto the site as well.   

   

I will post new and updated specs if someone would furnish them. It is in the plan also that the site's design be altered to make it fit the viewer's browser so that content can be more productively shown. The models I show were harvested from all over the 'net and not all of them had the correct aspect ratio, which explains the distortion on some of them.   

   

The broken links need to be fixed.   

   

Thanks  

   

Nico  

   

   

       

  

From: owner-commander-list-server(at)matronics.com [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Barry Collman

 Sent: Friday, December 28, 2007 6:16 AM

 To: commander-list(at)matronics.com

 Subject: Commander-List: www.aerocommander.com    

Hi Todd,  

    

   

    

I haven't looked at the "Models" section of the Website and you're absolutely right, the details given for the Model 520 are totally wrong!  

    

   

    

In fact, it looks as though most of the specifications for many of the Models are wrong, and the Specifications for one Model have been repeated for other Models. The details shown for the Model 520 are, in fact, those for the Model 500 and the Model 520 details appear when Model 560 is selected!  

    

   

    

It looks as though when I get the proverbial 5 minutes, I'll have prepare a new listing for Nico to get the correct details against each of the Models.  

    

   

    

Grateful thanks for pointing this out Todd!  

    

   

    

Barry Collman

 UK CommanderLand Rep.

 High Wycombe, England

 "Live life on the edge - if you don't take up too much space"  

    

   

  [quote]    

---

nico(at)cybersuperstore.c
Guest

Posted: Fri Dec 28, 2007 11:54 am Post subject: www.aerocommander.com

Hi Barry,

  

 Next year is fine, thanks. 

  

 You can do it in HTML, or pure text if you wish. I'll set  the font, size and color in the style sheets. If there are tables of  information, doing it in HTML with tables already laid out will save me a  boat-load of time, but if you don't have the time to get it laid out, I'll have  someone sit down and do it. 

  

 I just  received my newsletter. It's very nicely done and I sat down and read the whole  thing. 

  

 Thanks  Jim. 

  

 I  noticed that the side-note with the article "What's in a name" mentions that the  brochures from Guillaume Ravery are being scanned up for publication on the  website. That reminded me of the hundreds of articles, brochures and other stuff  that Bert and others have sent, which I scanned up on one of my sites. That  server is now in a locked colocation site and I cannot get to it and the hosting  company doesn't return my calls. It's been out of commission and inaccesible for  more than a month now. So, I am busy digging through archives and email  messagges trying to retrieve all the material that was sent. As soon as that is  complete, I will publish them onto the website also. Next year... ;-  |

  

 I thought I'd just  give you guys a heads-up on the situation, which causes most of the broken  links on the website. 

  

 Thanks,

  

 Nico

  

  

 



   From: owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Barry  Collman

Sent: Friday, December 28, 2007 8:08 AM

To:  commander-list(at)matronics.com

Subject: Re: Commander-List:  www.aerocommander.com

 

 Hi Nico,

  

 I will get the correct Specs to you, but will  need a little time.

 I may not be able to get round to doing it until  next year 

  

 Let me know what format you want the data in,  plus font and size etc.

  

 Best Regards,

 Barry

 [quote]   ---

steve2(at)sover.net
Guest

Posted: Fri Dec 28, 2007 12:31 pm Post subject: www.aerocommander.com

This reminds me again of how much we profit by the  quiet generosity of others who put together information, newsletters and  websites, etc. Thanks fellas!

 [quote]   ---

BertBerry1(at)aol.com
Guest

Posted: Fri Dec 28, 2007 12:37 pm Post subject: www.aerocommander.com

Nico,

  

 Let me know when your ready, I'll put a copy of what I have on a thumb drive and drop it in the mail to you.  I can pickup a 4gb thumb drive for almost nothing.

  

 Bert



top rated recipes and easy ways to stay in shape for winter.

  [quote][b]

nico(at)cybersuperstore.c
Guest

Posted: Fri Dec 28, 2007 1:16 pm Post subject: www.aerocommander.com

Ok, thanks Bert. I'll let  you know what I need.

 Nico

  



   From: owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of  BertBerry1(at)aol.com

Sent: Friday, December 28, 2007 12:37  PM

To: commander-list(at)matronics.com

Subject: Re:  www.aerocommander.com

 

 Nico,

  

 Let me know when your ready, I'll put a copy of what I have on a thumb  drive and drop it in the mail to you.  I can pickup a 4gb thumb drive for  almost nothing.

  

 Bert



 top rated  recipes and easy ways to stay in shape for winter.

[quote]



href="http://www.matronics.com/contribution">http://www.matronics.com/chref="http://www.matronics.com/Navigator?Commander-List">http://www.matronics.com/Navigator?Commander-List

href="http://forums.matronics.com">http://forums.matronics.com



[b]

nico(at)cybersuperstore.c
Guest

Posted: Fri Dec 28, 2007 1:22 pm Post subject: www.aerocommander.com

Thanks for the kind words, Jim. I had very limited time to spend  on anything else but the essentials, too. There seems to be a stir in the  interest, which is good for the group. We will work with what transpires. It's  very encouraging to see how some folks step up to the plate and get things done.  Thanks, you all. Or should I say y'all. Or even all y'all, since, I believe the  latter is plural. 

  

 Nico

  



   From: owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of  JTAddington

Sent: Friday, December 28, 2007 8:09 AM

To:  commander-list(at)matronics.com

Subject: RE: Commander-List:  www.aerocommander.com

 

  

Nico, I for one  appreciate what you have done even though some of it may not be right, and that  is because we have not given you the support you  needed. 

Keep up the good  work. 

Jim  Addington 

N444BD 

500A 

     

 

From:  owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of nico css

Sent: Friday, December 28, 2007 9:17  AM

To: commander-list(at)matronics.com

Subject: RE: Commander-List:  www.aerocommander.com

 

  

You guys are, of  course, absolutely right. Sorry about that. I think I asked for specs for the  other models at the time when I built out the scope of the models but when  nothing was forthcoming (I am not pointing fingers here) it went out of mind.  Without specs for some models I merely duplicated the specs of what I had to  'fill' the pages but it was not meant for it to remain so for that long. I added  the jets and singles onto the site as well.  

  

I will post new and  updated specs if someone would furnish them. It is in the plan also that the  site's design be altered to make it fit the viewer's browser so that content can  be more productively shown. The models I show were harvested from all over the  'net and not all of them had the correct aspect ratio, which explains the  distortion on some of them.  

  

The broken links need  to be fixed.  

  

Thanks 

  

Nico 

  

  

    

 

From:  owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Barry Collman

Sent: Friday, December 28, 2007 6:16  AM

To: commander-list(at)matronics.com

Subject: Commander-List:  www.aerocommander.com  

Hi  Todd,

  

 

  

I haven't looked at the "Models"  section of the Website and you're absolutely right, the details given for the  Model 520 are totally wrong!

  

 

  

In fact, it looks as though most  of the specifications for many of the Models are wrong, and the Specifications  for one Model have been repeated for other Models. The details shown for the  Model 520 are, in fact, those for the Model 500 and the Model 520 details appear  when Model 560 is selected!

  

 

  

It looks as though when I get the  proverbial 5 minutes, I'll have prepare a new listing for Nico to get the  correct details against each of the Models.

  

 

  

Grateful thanks for pointing this  out Todd!

  

 

  

Barry  Collman

UK  CommanderLand Rep.

High  Wycombe, England

"Live life on the edge -  if you don't take up too much space"

  

 

 [quote]      

---

jtaddington(at)verizon.ne
Guest

Posted: Fri Dec 28, 2007 1:44 pm Post subject: www.aerocommander.com

Nico,  

It is good that we are getting you educated on how to say things properly.  

Jim A        

  

From: owner-commander-list-server(at)matronics.com [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of nico css

 Sent: Friday, December 28, 2007 3:22 PM

 To: commander-list(at)matronics.com

 Subject: RE: Commander-List: www.aerocommander.com  

  

   

Thanks for the kind words, Jim. I had very limited time to spend on anything else but the essentials, too. There seems to be a stir in the interest, which is good for the group. We will work with what transpires. It's very encouraging to see how some folks step up to the plate and get things done. Thanks, you all. Or should I say y'all. Or even all y'all, since, I believe the latter is plural.   

   

Nico  

   

       

  

From: owner-commander-list-server(at)matronics.com [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of JTAddington

 Sent: Friday, December 28, 2007 8:09 AM

 To: commander-list(at)matronics.com

 Subject: RE: Commander-List: www.aerocommander.com  

Nico, I for one appreciate what you have done even though some of it may not be right, and that is because we have not given you the support you needed.  

Keep up the good work.  

Jim Addington  

N444BD  

500A  

         

  

From: owner-commander-list-server(at)matronics.com [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of nico css

 Sent: Friday, December 28, 2007 9:17 AM

 To: commander-list(at)matronics.com

 Subject: RE: Commander-List: www.aerocommander.com  

  

   

You guys are, of course, absolutely right. Sorry about that. I think I asked for specs for the other models at the time when I built out the scope of the models but when nothing was forthcoming (I am not pointing fingers here) it went out of mind. Without specs for some models I merely duplicated the specs of what I had to 'fill' the pages but it was not meant for it to remain so for that long. I added the jets and singles onto the site as well.   

   

I will post new and updated specs if someone would furnish them. It is in the plan also that the site's design be altered to make it fit the viewer's browser so that content can be more productively shown. The models I show were harvested from all over the 'net and not all of them had the correct aspect ratio, which explains the distortion on some of them.   

   

The broken links need to be fixed.   

   

Thanks  

   

Nico  

   

   

       

  

From: owner-commander-list-server(at)matronics.com [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Barry Collman

 Sent: Friday, December 28, 2007 6:16 AM

 To: commander-list(at)matronics.com

 Subject: Commander-List: www.aerocommander.com    

Hi Todd,  

    

   

    

I haven't looked at the "Models" section of the Website and you're absolutely right, the details given for the Model 520 are totally wrong!  

    

   

    

In fact, it looks as though most of the specifications for many of the Models are wrong, and the Specifications for one Model have been repeated for other Models. The details shown for the Model 520 are, in fact, those for the Model 500 and the Model 520 details appear when Model 560 is selected!  

    

   

    

It looks as though when I get the proverbial 5 minutes, I'll have prepare a new listing for Nico to get the correct details against each of the Models.  

    

   

    

Grateful thanks for pointing this out Todd!  

    

   

    

Barry Collman

 UK CommanderLand Rep.

 High Wycombe, England

 "Live life on the edge - if you don't take up too much space"  

    

   

  [quote]    

---

barry.collman(at)air-brit
Guest

Posted: Fri Dec 28, 2007 2:13 pm Post subject: www.aerocommander.com

Hi Nico,

  

 I'll put something together in a Word .doc file,  in tabled format and keep it to roughly four or five Models per  file.

 That ought to fit on one page.

  

 Then, when you get the first file you can let me  know if it's all OK< or whether you'd like the info 'tweaked' (a little) or  revamped (a lot).

  

 There could well be information that doesn't  tie-up with what was there previously.

 In such cases, query them of course, but bear in  mind a lot of 'rubbish' has been previously published over the years and I do  have the benefit of a former Aero Commander Engineer helping me ensure that  everything is right!

  

 I've got a little 'project' to complete, but  should be able to get something to you very early next week.

 



 Best Regards,

 Barry

 [quote]   ---

nico(at)cybersuperstore.c
Guest

Posted: Fri Dec 28, 2007 4:37 pm Post subject: www.aerocommander.com

I learn fast when slapping around comes with the  territory.

  

  



   From: owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of  JTAddington

Sent: Friday, December 28, 2007 1:44 PM

To:  commander-list(at)matronics.com

Subject: RE: Commander-List:  www.aerocommander.com

 

  

Nico, 

It is good that we are  getting you educated on how to say things properly. 

Jim  A    

 

From:  owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of nico css

Sent: Friday, December 28, 2007 3:22  PM

To: commander-list(at)matronics.com

Subject: RE: Commander-List:  www.aerocommander.com

 

  

Thanks for the kind  words, Jim. I had very limited time to spend on anything else but the  essentials, too. There seems to be a stir in the interest, which is good for the  group. We will work with what transpires. It's very encouraging to see how some  folks step up to the plate and get things done. Thanks, you all. Or should I say  y'all. Or even all y'all, since, I believe the latter is plural.   

  

Nico 

  

    

 

From:  owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of JTAddington

Sent: Friday, December 28, 2007 8:09  AM

To: commander-list(at)matronics.com

Subject: RE: Commander-List:  www.aerocommander.com 

Nico, I for one  appreciate what you have done even though some of it may not be right, and that  is because we have not given you the support you  needed. 

Keep up the good  work. 

Jim  Addington 

N444BD 

500A 

     

 

From:  owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of nico css

Sent: Friday, December 28, 2007 9:17  AM

To: commander-list(at)matronics.com

Subject: RE: Commander-List:  www.aerocommander.com

 

  

You guys are, of  course, absolutely right. Sorry about that. I think I asked for specs for the  other models at the time when I built out the scope of the models but when  nothing was forthcoming (I am not pointing fingers here) it went out of mind.  Without specs for some models I merely duplicated the specs of what I had to  'fill' the pages but it was not meant for it to remain so for that long. I added  the jets and singles onto the site as well.  

  

I will post new and  updated specs if someone would furnish them. It is in the plan also that the  site's design be altered to make it fit the viewer's browser so that content can  be more productively shown. The models I show were harvested from all over the  'net and not all of them had the correct aspect ratio, which explains the  distortion on some of them.  

  

The broken links need  to be fixed.  

  

Thanks 

  

Nico 

  

  

    

 

From:  owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Barry Collman

Sent: Friday, December 28, 2007 6:16  AM

To: commander-list(at)matronics.com

Subject: Commander-List:  www.aerocommander.com  

Hi  Todd,

  

 

  

I haven't looked at the "Models"  section of the Website and you're absolutely right, the details given for the  Model 520 are totally wrong!

  

 

  

In fact, it looks as though most  of the specifications for many of the Models are wrong, and the Specifications  for one Model have been repeated for other Models. The details shown for the  Model 520 are, in fact, those for the Model 500 and the Model 520 details appear  when Model 560 is selected!

  

 

  

It looks as though when I get the  proverbial 5 minutes, I'll have prepare a new listing for Nico to get the  correct details against each of the Models.

  

 

  

Grateful thanks for pointing this  out Todd!

  

 

  

Barry  Collman

UK  CommanderLand Rep.

High  Wycombe, England

"Live life on the edge -  if you don't take up too much space"

  

 

 [quote]      

---

nico(at)cybersuperstore.c
Guest

Posted: Fri Dec 28, 2007 4:44 pm Post subject: www.aerocommander.com

That would be fine, Bary. Thanks.

  



   From: owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Barry  Collman

Sent: Friday, December 28, 2007 2:14 PM

To:  commander-list(at)matronics.com

Subject: Re: Commander-List:  www.aerocommander.com

 

 Hi Nico,

  

 I'll put something together in a Word .doc file,  in tabled format and keep it to roughly four or five Models per  file.

 That ought to fit on one page.

  

 Then, when you get the first file you can let me  know if it's all OK< or whether you'd like the info 'tweaked' (a little) or  revamped (a lot).

  

 There could well be information that doesn't  tie-up with what was there previously.

 In such cases, query them of course, but bear in  mind a lot of 'rubbish' has been previously published over the years and I do  have the benefit of a former Aero Commander Engineer helping me ensure that  everything is right!

  

 I've got a little 'project' to complete, but  should be able to get something to you very early next week.

 



 Best Regards,

 Barry

 [quote]   ---

jtaddington(at)verizon.ne
Guest

Posted: Fri Dec 28, 2007 5:08 pm Post subject: www.aerocommander.com

Good! Now if we can just educate Barry to speak properly. Ha ha.  

Jim A  

         

  

From: owner-commander-list-server(at)matronics.com [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of nico css

 Sent: Friday, December 28, 2007 6:37 PM

 To: commander-list(at)matronics.com

 Subject: RE: Commander-List: www.aerocommander.com  

  

   

I learn fast when slapping around comes with the territory.  

   

   

       

  

From: owner-commander-list-server(at)matronics.com [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of JTAddington

 Sent: Friday, December 28, 2007 1:44 PM

 To: commander-list(at)matronics.com

 Subject: RE: Commander-List: www.aerocommander.com  

Nico,  

It is good that we are getting you educated on how to say things properly.  

Jim A        

  

From: owner-commander-list-server(at)matronics.com [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of nico css

 Sent: Friday, December 28, 2007 3:22 PM

 To: commander-list(at)matronics.com

 Subject: RE: Commander-List: www.aerocommander.com  

  

   

Thanks for the kind words, Jim. I had very limited time to spend on anything else but the essentials, too. There seems to be a stir in the interest, which is good for the group. We will work with what transpires. It's very encouraging to see how some folks step up to the plate and get things done. Thanks, you all. Or should I say y'all. Or even all y'all, since, I believe the latter is plural.   

   

Nico  

   

       

  

From: owner-commander-list-server(at)matronics.com [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of JTAddington

 Sent: Friday, December 28, 2007 8:09 AM

 To: commander-list(at)matronics.com

 Subject: RE: Commander-List: www.aerocommander.com  

Nico, I for one appreciate what you have done even though some of it may not be right, and that is because we have not given you the support you needed.  

Keep up the good work.  

Jim Addington  

N444BD  

500A  

         

  

From: owner-commander-list-server(at)matronics.com [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of nico css

 Sent: Friday, December 28, 2007 9:17 AM

 To: commander-list(at)matronics.com

 Subject: RE: Commander-List: www.aerocommander.com  

  

   

You guys are, of course, absolutely right. Sorry about that. I think I asked for specs for the other models at the time when I built out the scope of the models but when nothing was forthcoming (I am not pointing fingers here) it went out of mind. Without specs for some models I merely duplicated the specs of what I had to 'fill' the pages but it was not meant for it to remain so for that long. I added the jets and singles onto the site as well.   

   

I will post new and updated specs if someone would furnish them. It is in the plan also that the site's design be altered to make it fit the viewer's browser so that content can be more productively shown. The models I show were harvested from all over the 'net and not all of them had the correct aspect ratio, which explains the distortion on some of them.   

   

The broken links need to be fixed.   

   

Thanks  

   

Nico  

   

   

       

  

From: owner-commander-list-server(at)matronics.com [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Barry Collman

 Sent: Friday, December 28, 2007 6:16 AM

 To: commander-list(at)matronics.com

 Subject: Commander-List: www.aerocommander.com    

Hi Todd,  

    

   

    

I haven't looked at the "Models" section of the Website and you're absolutely right, the details given for the Model 520 are totally wrong!  

    

   

    

In fact, it looks as though most of the specifications for many of the Models are wrong, and the Specifications for one Model have been repeated for other Models. The details shown for the Model 520 are, in fact, those for the Model 500 and the Model 520 details appear when Model 560 is selected!  

    

   

    

It looks as though when I get the proverbial 5 minutes, I'll have prepare a new listing for Nico to get the correct details against each of the Models.  

    

   

    

Grateful thanks for pointing this out Todd!  

    

   

    

Barry Collman

 UK CommanderLand Rep.

 High Wycombe, England

 "Live life on the edge - if you don't take up too much space"  

    

   

  [quote]    

---

yourtcfg(at)aol.com
Guest

Posted: Fri Dec 28, 2007 5:52 pm Post subject: www.aerocommander.com

THANKS "SIR" BARRY!!  jb

   	  Quote: 	
		  It looks as though when I get the proverbial 5 minutes, I'll have prepare a new listing for Nico to get the correct details against each of the Models 	


 

 

 --

yourtcfg(at)aol.com
Guest

Posted: Fri Dec 28, 2007 5:53 pm Post subject: www.aerocommander.com

AMEN, AMEN!!  Thanks Nico!! jb

   	  Quote: 	
		  Nico, I for one appreciate what you have done 	


 

 

 --

moe(at)rosspistons.com
Guest

Posted: Sat Dec 29, 2007 8:54 pm Post subject: www.aerocommander.com

JB

  

 My post office address needs to be changed.  How do I  do this?

  

 Moe Mills

 N680RR

  



   From: owner-commander-list-server(at)matronics.com  [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of  yourtcfg(at)aol.com

Sent: Friday, December 28, 2007 5:51  PM

To: commander-list(at)matronics.com

Subject: Re:  www.aerocommander.com

 

THANKS "SIR" BARRY!!  jb

  	  Quote: 	
		  It looks as though when I get the proverbial 5 minutes,    I'll have prepare a new listing for Nico to get the correct details against    each of the Models 	


-----Original  Message-----

From: Barry Collman  <barry.collman(at)air-britain.co.uk>

To:  commander-list(at)matronics.com

Sent: Fri, 28 Dec 2007 6:16 am

Subject:  www.aerocommander.com



  #AOLMsgPart_2_6ff22287-f466-42f7-8b23-9bc88622d216 P.MsoNormal { 	FONT-SIZE: 12pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman" } #AOLMsgPart_2_6ff22287-f466-42f7-8b23-9bc88622d216 LI.MsoNormal { 	FONT-SIZE: 12pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman" } #AOLMsgPart_2_6ff22287-f466-42f7-8b23-9bc88622d216 DIV.MsoNormal { 	FONT-SIZE: 12pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman" } #AOLMsgPart_2_6ff22287-f466-42f7-8b23-9bc88622d216 A:link { 	COLOR: blue; TEXT-DECORATION: underline } #AOLMsgPart_2_6ff22287-f466-42f7-8b23-9bc88622d216 SPAN.MsoHyperlink { 	COLOR: blue; TEXT-DECORATION: underline } #AOLMsgPart_2_6ff22287-f466-42f7-8b23-9bc88622d216 A:visited { 	COLOR: blue; TEXT-DECORATION: underline } #AOLMsgPart_2_6ff22287-f466-42f7-8b 23-9bc88622d216 SPAN.MsoHyperlinkFollowed { 	COLOR: blue; TEXT-DECORATION: underline } #AOLMsgPart_2_6ff22287-f466-42f7-8b23-9bc88622d216 PRE { 	FONT-SIZE: 10pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: "Courier New" } #AOLMsgPart_2_6ff22287-f466-42f7-8b23-9bc88622d216 SPAN.EmailStyle19 { 	COLOR: navy; FONT-FAMILY: Arial; mso-style-type: personal-reply } #AOLMsgPart_2_6ff22287-f466-42f7-8b23-9bc88622d216 DIV.Section1 { 	page: Section1 }   Hi Todd,

  

 I haven't looked at the "Models" section of the  Website and you're absolutely right, the details given for the Model 520 are  totally wrong!

  

 In fact, it looks as though most of the  specifications for many of the Models are wrong, and the Specifications for one  Model have been repeated for other Models. The details shown for the Model 520  are, in fact, those for the Model 500 and the Model 520 details appear when  Model 560 is selected!

  

 It looks as though when I get the proverbial 5  minutes, I'll have prepare a new listing for Nico to get the correct details  against each of the Models.

  

 Grateful thanks for pointing this out  Todd!

  

 Barry Collman

UK CommanderLand Rep.

High  Wycombe, England

"Live life on the edge - if you don't take up too much  space"

  

 [quote]   ---

yourtcfg(at)aol.com
Guest

Posted: Sat Dec 29, 2007 11:26 pm Post subject: www.aerocommander.com

Just send the new address and Sue will make the change.  jb

   	  Quote: 	
		  My post office address needs to be changed.  How do I do this? 	


 

 

 --

Display posts from previous:

	Matronics Email Lists Forum Index -> Commander-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum