 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
ruruny(at)aol.com
Guest
|
 Posted: Thu Jan 10, 2008 8:38 am Post subject: (CH-701) Anyone else have edge distance issues with 7F3-3SP |
 |
|
John,
I don't remember any real issues with this, although I probably looked at it
for quite a long time trying to figure the best way to do this.The rivets are very close together
but the plans call for this. You can see in the pic, the one rivet is a little further apart from
the rest so it would line up with other rivets and the other 3 are grouped so I would not
hit the edge of the top fuselage skin and still had edge distance on the gusset.
It is tight though. Picture attached.
Brian Unruh
Long Island, NY
http://701builder.com
When I drilled out the holes that connect 7F3-3SP with the diagonal tube the
distance between the holes was unacceptable to me......Anyone else have this problem?
I could not find anything in the archives
about it.
Thanks!
More new features than ever. Check out the new AOL Mail!
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
| Description: |
|
| Filesize: |
46.32 KB |
| Viewed: |
300 Time(s) |
|
|
|
| Back to top |
|
 |
john.marzulli(at)gmail.co
Guest
|
| Posted: Thu Jan 10, 2008 10:29 am Post subject: (CH-701) Anyone else have edge distance issues with 7F3-3SP |
|
|
Thanks to everyone for the feedback.
I know that the designer can violate edge and spacing distances, but the rivet heads would have been overlapping in my case.
The new part I fabricated has about the same spacing as this photo.
Thanks again!
On Jan 10, 2008 8:37 AM, <ruruny(at)aol.com (ruruny(at)aol.com)> wrote:
| Quote: | John,
I don't remember any real issues with this, although I probably looked at it
for quite a long time trying to figure the best way to do this.The rivets are very close together
but the plans call for this. You can see in the pic, the one rivet is a little further apart from
the rest so it would line up with other rivets and the other 3 are grouped so I would not
hit the edge of the top fuselage skin and still had edge distance on the gusset.
It is tight though. Picture attached.
Brian Unruh
Long Island, NY
http://701builder.com
When I drilled out the holes that connect 7F3-3SP with the diagonal tube the
distance between the holes was unacceptable to me......Anyone else have this problem?
I could not find anything in the archives
about it.
Thanks!
More new features than ever. Check out the new AOL Mail!
|
--
John Marzulli
http://701Builder.blogspot.com/
"Flying a plane is no different than riding a bicycle... it's just a lot harder to put baseball cards in the spokes.
-Airplane The Movie [quote][b]
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
