Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

14" spinner
Goto page 1, 2 Next

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

thane

Joined: 27 Nov 2006
Posts: 56

Posted: Tue Jan 15, 2008 3:28 pm Post subject: 14" spinner

Just wanted to ask the group if anyone knows a source for the 14" spinner 

required for the James Cowl?  It is to bad that the cowl was not designed 

and released with an affordable spinner included.

Thanks for any info, so far I have come up short online with e-mail 

requests.

Regards,

Thane States

Engine is on the way as are many other expensive goodies!!



Do not archive

_________________
Working on finish kit: I hate fiberglass!!

seipel(at)seznam.cz
Guest

Posted: Tue Jan 15, 2008 4:02 pm Post subject: 14" spinner

The only places I've found are the ones listed on the James website.  

And you'll need a second mortgage for any of those.  I'm about to bite 

the bullet, so if anyone knows of a cheaper one, I'd sure be interested 

to hear!



PJ Seipel

RV-10 #40032



Thane States wrote:

 	  Quote: 	
		   



 Just wanted to ask the group if anyone knows a source for the 14" 

 spinner required for the James Cowl?  It is to bad that the cowl was 

 not designed and released with an affordable spinner included.

 Thanks for any info, so far I have come up short online with e-mail 

 requests.

 Regards,

 Thane States

 Engine is on the way as are many other expensive goodies!!



 Do not archive

lessdragprod(at)aol.com
Guest

Posted: Tue Jan 15, 2008 4:10 pm Post subject: 14" spinner

The 14" spinner is available on the MT Propeller.  

    

   Regards,

   Jim Ayers

   Less drag products, Inc.

 

 --

CJohnston(at)popsound.com
Guest

Posted: Tue Jan 15, 2008 4:19 pm Post subject: 14" spinner

If you go for an MT prop, you can order it with the 14" spinner, and I

don't believe it costs extra.  Oh wait... maybe that's why the MT 3

blade prop is so expensive 



cj

#40410

not sure where I am...

www.perfectlygoodairplane.net



--

greytex

Joined: 29 May 2006
Posts: 28

Posted: Tue Jan 15, 2008 4:22 pm Post subject: 14" spinner

<?xml:namespace prefix="v" /><?xml:namespace prefix="o" /><![endif]-->  Same here

  

 John Cram

 40569 waiting on finishing kit

 [quote]   ---

Rhonda(at)bpaengines.com
Guest

Posted: Wed Jan 16, 2008 6:28 am Post subject: 14" spinner

Hi Thane:



I don't have a recommendation, but I thought you'd like to know that the

engine was tested on the dyno yesterday.  It did great - 288 hp!  It

will ship to you today! 



Best,



Rhonda



--

Rhonda(at)bpaengines.com
Guest

Posted: Wed Jan 16, 2008 8:08 am Post subject: 14" spinner

He Thane:



Waiting to hear back from Yellow.  They gave me an outrages price quote

to deliver the engine to you freight collect.  I may just send it on my

account and have you send me a check.  Will be about 1/2 the cost.



Will advise asap.



Rhonda

--

Rhonda(at)bpaengines.com
Guest

Posted: Wed Jan 16, 2008 8:16 am Post subject: 14" spinner

Sorry did not mean to post to the list.



Rhonda

Do Not Archive



--

indigoonlatigo(at)msn.com
Guest

Posted: Wed Jan 16, 2008 9:38 am Post subject: 14" spinner

Nice advertising! 



[quote] Subject: RE: 14" spinner

 Date: Wed, 16 Jan 2008 08:24:52 -0600

 From: Rhonda(at)bpaengines.com

 To: rv10-list(at)matronics.com

 

 --> RV10-List message posted by: "Rhonda Bewley" <Rhonda(at)BPAENGINES.com>

 

 Hi Thane:

 

 I don't have a recommendation, but I thought you'd like to know that the

 engine was tested on the dyno yesterday. It did great - 288 hp! It

 will ship to you today! 

 

 Best,

 

 Rhonda

 

 --

GRANSCOTT(at)aol.com
Guest

Posted: Wed Jan 16, 2008 9:49 am Post subject: 14" spinner

In a message dated 1/16/2008 11:42:10 AM Central Standard Time,  indigoonlatigo(at)msn.com writes:

  	  Quote: 	
		  Nice    advertising! 	


 

 Don't think Rhonda needs to toot their  horn...John



Start the year off right.  Easy ways to stay in shape in the new year. 

  [quote][b]

BPA(at)bpaengines.com
Guest

Posted: Wed Jan 16, 2008 10:14 am Post subject: 14" spinner

CHEAP advertising at that!! Good oops J  

   

--

robin1(at)mrmoisture.com
Guest

Posted: Wed Jan 16, 2008 12:54 pm Post subject: 14" spinner

My BPE didn’t come with a horn! But it did come with 293 Hp…. Teehee  

   

I picked up a 14” spinner on ebay for $250. My guess is that it has a 1 in 20 chance of fitting. If it doesn’t there is a long line of people wanting to purchase it on ebay so I figured there was minimal down side.  

   

Robin  

Do Not Archive   

       

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of BPA

 Sent: Wednesday, January 16, 2008 10:12 AM

 To: rv10-list(at)matronics.com

 Subject: RE: 14" spinner  

  

  

   

CHEAP advertising at that!! Good oops J  

   

--

AV8ORJWC

Joined: 13 Jul 2006
Posts: 1149
Location: Aurora, Oregon "Home of VANS"

Posted: Wed Jan 16, 2008 4:40 pm Post subject: 14" spinner

Robin, your BPE seems to be consistently strong as Mike Sausen’s and Deems Davis’.  I have not seen output posted for Gary Foster.  Good luck with the Spinner journey.  

   

John Cox  

         

  

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Robin Marks

 Sent: Wednesday, January 16, 2008 12:50 PM

 To: rv10-list(at)matronics.com

 Subject: RE: 14" spinner  

  

   

My BPE didn’t come with a horn! But it did come with 293 Hp…. Teehee  

   

I picked up a 14” spinner on ebay for $250. My guess is that it has a 1 in 20 chance of fitting. If it doesn’t there is a long line of people wanting to purchase it on ebay so I figured there was minimal down side.  

   

Robin  

Do Not Archive   

       

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of BPA

 Sent: Wednesday, January 16, 2008 10:12 AM

 To: rv10-list(at)matronics.com

 Subject: RE: 14" spinner  

  

  

   

CHEAP advertising at that!! Good oops J  

   

--

apilot2(at)gmail.com
Guest

Posted: Wed Jan 16, 2008 6:12 pm Post subject: 14" spinner

Is there no concern about the reduced flutter margin with the

additional power, above Van's design limit? Or has someone figgered

out how to increase the design flutter TAS?



On Jan 16, 2008 5:34 PM, John W. Cox <johnwcox(at)pacificnw.com> wrote:

[quote]



 Robin, your BPE seems to be consistently strong as Mike Sausen's and Deems

 Davis'.  I have not seen output posted for Gary Foster.  Good luck with the

 Spinner journey.



 John Cox



  ________________________________

 From: owner-rv10-list-server(at)matronics.com

 [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Robin Marks

  Sent: Wednesday, January 16, 2008 12:50 PM

  To: rv10-list(at)matronics.com

  Subject: RE: 14" spinner



 My BPE didn't come with a horn! But it did come with 293 Hp…. Teehee



 I picked up a 14" spinner on ebay for $250. My guess is that it has a 1 in

 20 chance of fitting. If it doesn't there is a long line of people wanting

 to purchase it on ebay so I figured there was minimal down side.



 Robin



 Do Not Archive



 From: owner-rv10-list-server(at)matronics.com

 [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of BPA

  Sent: Wednesday, January 16, 2008 10:12 AM

  To: rv10-list(at)matronics.com

  Subject: RE: 14" spinner



 CHEAP advertising at that!! Good oops J



 --

msausen

Joined: 25 Oct 2007
Posts: 559
Location: Appleton, WI USA

Posted: Wed Jan 16, 2008 6:59 pm Post subject: 14" spinner

Not really.  I had mine fitted with a manual governor controlled by the most advanced processor in the world to limit power output to design limits.  Also referred to as the throttle and the human brain.







Michael

Do not archive



--

msausen

Joined: 25 Oct 2007
Posts: 559
Location: Appleton, WI USA

Posted: Wed Jan 16, 2008 7:05 pm Post subject: 14" spinner

Not a bad idea.  Every time I think about switching back to the Hartzell I remember that I need that 14” spinner and that kills that thought.  

   

Michael  

       

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Robin Marks

 Sent: Wednesday, January 16, 2008 2:50 PM

 To: rv10-list(at)matronics.com

 Subject: RE: 14" spinner  

  

  

   

My BPE didn’t come with a horn! But it did come with 293 Hp…. Teehee  

   

I picked up a 14” spinner on ebay for $250. My guess is that it has a 1 in 20 chance of fitting. If it doesn’t there is a long line of people wanting to purchase it on ebay so I figured there was minimal down side.  

   

Robin  

Do Not Archive   

       

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of BPA

 Sent: Wednesday, January 16, 2008 10:12 AM

 To: rv10-list(at)matronics.com

 Subject: RE: 14" spinner  

  

  

   

CHEAP advertising at that!! Good oops J  

   

--

robin1(at)mrmoisture.com
Guest

Posted: Wed Jan 16, 2008 10:02 pm Post subject: 14" spinner

If the spinner does not work on mine I would be happy to sell it to you.  

   

Regarding: Robin, your BPE seems to be consistently strong as Mike Sausen’s and Deems Davis’  

   

I own a small Dyno and I wonder how accurate these readings could be from one engine to the next, one month to the next, mornings, nights, hot, cold.  

   

Regarding: the reduced flutter margin with the additional power  

   

I to will throttle back. I fly my RV-6A EASY and still get plenty of speed at 21.5”  

   

Getting exciting, panel in 2 (aviation) weeks.  

   

Robin  

Do Not Archive  

   

       

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of RV Builder (Michael Sausen)

 Sent: Wednesday, January 16, 2008 7:01 PM

 To: rv10-list(at)matronics.com

 Subject: RE: 14" spinner  

  

  

   

Not a bad idea.  Every time I think about switching back to the Hartzell I remember that I need that 14” spinner and that kills that thought.  

   

Michael  

       

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Robin Marks

 Sent: Wednesday, January 16, 2008 2:50 PM

 To: rv10-list(at)matronics.com

 Subject: RE: 14" spinner  

  

  

   

My BPE didn’t come with a horn! But it did come with 293 Hp…. Teehee  

   

I picked up a 14” spinner on ebay for $250. My guess is that it has a 1 in 20 chance of fitting. If it doesn’t there is a long line of people wanting to purchase it on ebay so I figured there was minimal down side.  

   

Robin  

Do Not Archive   

       

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of BPA

 Sent: Wednesday, January 16, 2008 10:12 AM

 To: rv10-list(at)matronics.com

 Subject: RE: 14" spinner  

  

  

   

CHEAP advertising at that!! Good oops J  

   

--

steveadams

Joined: 10 Jan 2006
Posts: 191

Posted: Thu Jan 17, 2008 5:00 am Post subject: Re: 14

UHS  sells a 14 inch spinner, has reasonable prices,  and they will do custom work. I don't know if it will fit your needs, but I have one of their 13inch spinners and it is very nice. http://www.uhsspinners.com



Steve

msausen

Joined: 25 Oct 2007
Posts: 559
Location: Appleton, WI USA

Posted: Thu Jan 17, 2008 6:33 am Post subject: 14" spinner

Awesome!  Anyone else have any experience with these guys?



Michael

Do not archive



--

msausen

Joined: 25 Oct 2007
Posts: 559
Location: Appleton, WI USA

Posted: Thu Jan 17, 2008 6:52 am Post subject: 14" spinner

Absolutely the environment will affect a dyno run.  When mine was on the dyno it was during a heat wave.  BPE’s dyno is in a oven so it was rather hot.  (ok so it’s a small room on an outside wall but it gets oven hot in there)  It ran at 272HP with 100 degree inlet and 118 degree fuel temp.  I expect that 272 is on the lower end of the HPmax output.  

   

Michael  

Do not archive  

       

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Robin Marks

 Sent: Wednesday, January 16, 2008 11:56 PM

 To: rv10-list(at)matronics.com

 Subject: RE: 14" spinner  

  

  

   

If the spinner does not work on mine I would be happy to sell it to you.  

   

Regarding: Robin, your BPE seems to be consistently strong as Mike Sausen’s and Deems Davis’  

   

I own a small Dyno and I wonder how accurate these readings could be from one engine to the next, one month to the next, mornings, nights, hot, cold.  

   

Regarding: the reduced flutter margin with the additional power  

   

I to will throttle back. I fly my RV-6A EASY and still get plenty of speed at 21.5”  

   

Getting exciting, panel in 2 (aviation) weeks.  

   

Robin  

Do Not Archive  

   

       

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of RV Builder (Michael Sausen)

 Sent: Wednesday, January 16, 2008 7:01 PM

 To: rv10-list(at)matronics.com

 Subject: RE: 14" spinner  

  

  

   

Not a bad idea.  Every time I think about switching back to the Hartzell I remember that I need that 14” spinner and that kills that thought.  

   

Michael  

       

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Robin Marks

 Sent: Wednesday, January 16, 2008 2:50 PM

 To: rv10-list(at)matronics.com

 Subject: RE: 14" spinner  

  

  

   

My BPE didn’t come with a horn! But it did come with 293 Hp…. Teehee  

   

I picked up a 14” spinner on ebay for $250. My guess is that it has a 1 in 20 chance of fitting. If it doesn’t there is a long line of people wanting to purchase it on ebay so I figured there was minimal down side.  

   

Robin  

Do Not Archive   

       

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of BPA

 Sent: Wednesday, January 16, 2008 10:12 AM

 To: rv10-list(at)matronics.com

 Subject: RE: 14" spinner  

  

  

   

CHEAP advertising at that!! Good oops J  

   

--

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours Goto page 1, 2 Next
Page 1 of 2

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum