Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Question

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith-List
View previous topic :: View next topic  
Author Message
John75142



Joined: 05 Dec 2007
Posts: 56
Location: Kaufman, TX
PostPosted: Sat Jan 19, 2008 4:22 pm    Post subject: Question Reply with quote
On the Horz. Stab. the plans call for a fairlead to go in the cutout of top skin. My question is what is this fairlead 7C5-1 and what do you make it out of.


Scratch building 701



CREATIVE SIGNWORKS
1168 Byron Rd.
Kaufman, Tx 75142
John & Mindy Short
972-962-7464
Cell: 214-240-3815
www.creative-sign-works.com
creativesigns(at)embarqmail.com (creativesigns(at)embarqmail.com)
[quote][b]

- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

_________________
John Short
Back to top
View user's profile Send private message Visit poster's website
dougsnash(at)yahoo.com
Guest
PostPosted: Sat Jan 19, 2008 8:59 pm    Post subject: Question Reply with quote
I'm using 1/8 inch nylon from Aircraft Spruce. I
can't piture exactly what the fairlead your refering
to looks like right now as the plans are in my -30 Deg
C shop. The fairlead should be a piece of the nylon
(plastic) with a hole drilled into it for the cable
and it will be riveted in place.

Hope this asnwers your question.

Doug MacDonald
CH-701 Scratch Builder
NW Ontario, Canada

Do not Archive
--- John Short <creativesigns(at)embarqmail.com> wrote:

Quote:
On the Horz. Stab. the plans call for a fairlead to
go in the cutout of top skin. My question is what is
this fairlead 7C5-1 and what do you make it out of.

Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs

- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List
Back to top
DRAGONFUEL(at)aol.com
Guest
PostPosted: Sat Jan 19, 2008 11:09 pm    Post subject: Question Reply with quote
a fairlead is a plastic or other smooth hard surfaced guide and bearing for control cables to slide through. Often several attached to bulkheads and other structure in the open rear fuselage to guide the cables as they control the rear (or in the wing for ailerons) control surfaces. Can be used with any cable system.

Cheers,

Bob Archibald

Start the year off right. Easy ways to stay in shape in the new year.
[quote][b]

- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List
Back to top
amyvega2005(at)earthlink.
Guest
PostPosted: Sun Jan 20, 2008 8:51 am    Post subject: Question Reply with quote
it is 1/8 Nylon you order in 12"X12" SHEETS FROM Aircraft Spruce. part No. 03-51100

Juan

--

- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List
Back to top
John75142



Joined: 05 Dec 2007
Posts: 56
Location: Kaufman, TX
PostPosted: Sun Jan 20, 2008 12:46 pm    Post subject: Question Reply with quote
Thanks to all.
---

- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

_________________
John Short
Back to top
View user's profile Send private message Visit poster's website
planecrazydld(at)yahoo.co
Guest
PostPosted: Sun Jan 20, 2008 1:48 pm    Post subject: Question Reply with quote
and like most commodity items that the aircaft stores sell, this one is also available from Mcmaster.com:

8539K13Nylon 6/6 Sheet 1/8" Thick, 12" X 12"In stock at $9.95 Each
Just make sure that you are standing well back from the curb as they may deliver before you get off the phone...and the shipping charge will be reasonable!

Always check them for something that can be defined specifically

Juan Vega <amyvega2005(at)earthlink.net> wrote:[quote] --> Zenith-List message posted by: Juan Vega

it is 1/8 Nylon you order in 12"X12" SHEETS FROM Aircraft Spruce. part No. Be a better friend, newshound, and [quote][b]

- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group