Matronics Email Lists :: View topic - new excellent fly-in eatery

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

new excellent fly-in eatery
Goto page Previous 1, 2

Matronics Email Lists Forum Index -> RVSouthEast-List

View previous topic :: View next topic

Author Message

flyguy

Joined: 04 Mar 2006
Posts: 325

Posted: Mon Jan 28, 2008 6:13 pm Post subject: new excellent fly-in eatery

Leggette made a golf club holder behind rear baggage, so a fishin stick should be easy stuff...right Legs?



 ---

JHiggins(at)a1roofingands
Guest

Posted: Mon Jan 28, 2008 7:16 pm Post subject: new excellent fly-in eatery

Just Kidding! A two or three piece rod should fit ok in the rear baggage area.  

   

Jim  

   

--

bill(at)repucci.com
Guest

Posted: Mon Jan 28, 2008 8:58 pm Post subject: new excellent fly-in eatery

I'm  thinking M-80's will work just fine.  They are small and no modification to  the RV is required.

  

 

 --

sportav8r(at)gmail.com
Guest

Posted: Tue Jan 29, 2008 9:36 am Post subject: new excellent fly-in eatery

I used to fish with M-80's, too    when we could get them from South Carolina.  I seem to recall they were sold "under the counter" at certain fireworks stands along the highway to Florida, and my Dad had to pay premium price for them.  Those were the days.

 

-Stormy



On Jan 28, 2008 11:47 PM, Bill Repucci <bill(at)repucci.com (bill(at)repucci.com)> wrote:

[quote]            I'm  thinking M-80's will work just fine.  They are small and no modification to  the RV is required.

  

 

[b]

Lenleg(at)aol.com
Guest

Posted: Tue Jan 29, 2008 9:46 am Post subject: new excellent fly-in eatery

No problem ... same idea as golf clubs !!  For anyone interested ..  let me know.

  

 Len

  

  

 In a message dated 1/28/2008 9:15:04 PM Eastern Standard Time,  bill28104(at)yahoo.com writes:

 [quote]      Leggette    made a golf club holder behind rear baggage, so a fishin stick should be easy    stuff...right Legs?



   -----    Original Message ----

From: Bill Boyd <sportav8r(at)gmail.com>

To:    rvsoutheast-list(at)matronics.com

Sent: Monday, January 28, 2008 8:48:57    PM

Subject: Re: new excellent fly-in eatery



Remove    wingtip.  Pass loose fitting capped pvc thinwall into a series of    lightening holes spanwise.  JB weld in place.  Make darn sure this    contraption does not come near your aileron pushrod stuff!  Just an    idea.  Might also be able to sling it out of the way aft of the baggage    bulkhead with same considerations for the elevator push    tubes.



Consulting the builder (Rick) might be    wise.



-Stormy



   On Jan 28, 2008 5:31 PM, JIM HIGGINS <JHiggins(at)a1roofingandsiding.com (JHiggins(at)a1roofingandsiding.com)>    wrote:

   [quote]               

Absolutely!     

      

Now I just have to      figure out how to get a 9' rod into my plane. J     

      

Jim     

      

     --

Scott Keadle

Joined: 10 Jan 2006
Posts: 31
Location: Lake Norman, North Carolina

Posted: Tue Jan 29, 2008 3:40 pm Post subject: Re: new excellent fly-in eatery

Hi Jim. Tad and I have been working together on my RV-10 project for more than a year, and neither one knew until today that the other one was interested in fly fishing. Maybe he and I should talk about something other than flying sometime while we're working... Anyhow, the 10 should be flying within a month or so, and I'd be interested in this fly-fishing trip that's taking shape. I'm currently based at RUQ. Scott Keadle

[quote="tadsargent(at)bellsouth.n"]Jim fly fishing is a hobby of mine as well.  I would like to join you on a TN. trip or NC excursion.   

Tad Sargent 

 [quote]-------------- Original message from "JIM HIGGINS" <JHiggins>: -------------- 

 	  Quote: 	
		   --> RVSouthEast-List message posted by: "JIM HIGGINS" 

 

 

 Hi Ron. I've been flying a Titan Tornado the last couple of years, just 

 got my new 7 (purchased from Rick Gray in Ohio) a few months ago, and 

 loving it. Painting is scheduled in a few months. I have no experience 

 with formation, and just a little bit of aerobatics (loops/rolls). I 

 would be interested in ALL aspects of flying, and always looking to 

 learn more. 

 Also, in case anybody cares, I'm an avid fly fisherman, that's my other 

 hobby, and plan on flying up to Elizabethton, TN on occasion to soak a 

 couple of flies. 

 

 Jim 

 

 --

_________________
Scott Keadle
14A, Lake Norman Airpark
N426AK RV-10, final assembly
N246SK, Giles 202, flying

bill(at)repucci.com
Guest

Posted: Tue Jan 29, 2008 4:37 pm Post subject: new excellent fly-in eatery

Stormy,

  

 It  frightens me how much we think alike.  How is it you went on to Med school  and I went on to detention?

  

 Bill  R.

  

 

 --

bburril(at)carolina.rr.co
Guest

Posted: Wed Jan 30, 2008 1:43 am Post subject: new excellent fly-in eatery

Scott, i thought you were at lake norman?The other sports you've talked with 

barry about we probalby don't need to have on the web.

---

Scott Keadle

Joined: 10 Jan 2006
Posts: 31
Location: Lake Norman, North Carolina

Posted: Wed Jan 30, 2008 5:45 am Post subject: Re: new excellent fly-in eatery

What? Kitten Juggling?!!



 	  bburril(at)carolina.rr.co wrote: 	
		  Scott, i thought you were at lake norman?The other sports you've talked with 

barry about we probalby don't need to have on the web.

---

_________________
Scott Keadle
14A, Lake Norman Airpark
N426AK RV-10, final assembly
N246SK, Giles 202, flying

JHiggins(at)a1roofingands
Guest

Posted: Wed Jan 30, 2008 7:05 am Post subject: new excellent fly-in eatery

Alright! Let's do this! It should be fun. 45 minutes from Charlotte by

plane or 3-1/2 to 4 hrs by car. Sounds like flying would be better.

We'll work on details when it starts getting warmer. Good luck with your

10 in the coming weeks.



Jim



--

JHiggins(at)a1roofingands
Guest

Posted: Wed Jan 30, 2008 7:06 am Post subject: new excellent fly-in eatery

PS I'm planning on going to RUQ this Sat. for the lunch. Hope to see you

there.



Jim



--

MauleDriver(at)nc.rr.com
Guest

Posted: Wed Jan 30, 2008 9:49 am Post subject: new excellent fly-in eatery

Fly Fishing!  I'm another one here in NC.  I'm flying a Maule out of 

Lake Ridge in Durham (weekly into Lake Norman Airpark up until 3 or 4 

years ago).  Also building a '10 #40605.

 

I'm a trout guy in long term withdrawal.  My last line wetting was my 

first saltwater off Montauk... the '10 would have made it a much shorter 

journey.



Anyway, just wanted to say Hi.  I will have to try and join up on one of 

these lunch trips if you'll welcome a rag tail, hard wing, glass cowl, 

butt dragging throwback from Moutrie to tag along.



Bill Watson

Lake Ridge Aeropark

"building in the hangar at the midfield turnoff"

bburril wrote:

[quote] 

 <bburril(at)carolina.rr.com>



 Scott, i thought you were at lake norman?The other sports you've 

 talked with barry about we probalby don't need to have on the web.

 ---

Scott Keadle

Joined: 10 Jan 2006
Posts: 31
Location: Lake Norman, North Carolina

Posted: Wed Jan 30, 2008 6:22 pm Post subject: Re: new excellent fly-in eatery

Sounds good to me. I'm currently flying a plastic airplane. Total blasphemy...

[quote="MauleDriver(at)nc.rr.com"]Fly Fishing!  I'm another one here in NC.  I'm flying a Maule out of 

Lake Ridge in Durham (weekly into Lake Norman Airpark up until 3 or 4 

years ago).  Also building a '10 #40605.

 

I'm a trout guy in long term withdrawal.  My last line wetting was my 

first saltwater off Montauk... the '10 would have made it a much shorter 

journey.



Anyway, just wanted to say Hi.  I will have to try and join up on one of 

these lunch trips if you'll welcome a rag tail, hard wing, glass cowl, 

butt dragging throwback from Moutrie to tag along.



Bill Watson

Lake Ridge Aeropark

"building in the hangar at the midfield turnoff"

bburril wrote:

 	  Quote: 	
		   

 <bburril>



 Scott, i thought you were at lake norman?The other sports you've 

 talked with barry about we probalby don't need to have on the web.

 ---

_________________
Scott Keadle
14A, Lake Norman Airpark
N426AK RV-10, final assembly
N246SK, Giles 202, flying

Scott Keadle

Joined: 10 Jan 2006
Posts: 31
Location: Lake Norman, North Carolina

Posted: Wed Jan 30, 2008 6:30 pm Post subject: Re: new excellent fly-in eatery

Pretty sure I'm headed down to Boynton Beach Florida Saturday morning, otherwise would plan on being  there. Will catch up soon and plan a flying-fly-fishing trip. Sounds like it is generating some interest. We may need Smokey to help put the forest fire out if Stormy and Bill follow through with their bombing plans. Scott

 	  JHiggins(at)a1roofingands wrote: 	
		  PS I'm planning on going to RUQ this Sat. for the lunch. Hope to see you

there.



Jim



--

_________________
Scott Keadle
14A, Lake Norman Airpark
N426AK RV-10, final assembly
N246SK, Giles 202, flying

bill(at)repucci.com
Guest

Posted: Fri Feb 01, 2008 4:57 pm Post subject: new excellent fly-in eatery

Have fun guy.  Unfortunately I won't be able to make it.  I sent the

P-mags in for a software and hardware upgrade and they just shipped this

afternoon so I don't expect to see them until next week, my choice not

E-mag Air's.



FYI - If any of you are running E or P-mags, contact Brad regarding the

upgrade.  It turns out they expoxied the trigger magnet to the shaft and

these have had a high failure rate.  They can machine your shaft (that's

on the mag Ben so don't go getting excited on us) and attach the magnet

with a brass holder and screws.



Bill R.



--

Display posts from previous:

	Matronics Email Lists Forum Index -> RVSouthEast-List	All times are GMT - 8 Hours Goto page Previous 1, 2
Page 2 of 2

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum