Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

YAK Rudder pedal mod

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List
View previous topic :: View next topic  
Author Message
bhancock(at)worldwidewarb
Guest
PostPosted: Tue Feb 05, 2008 4:03 pm    Post subject: YAK Rudder pedal mod Reply with quote
Well, lo and behold the Yak rudder pedal design is substantially
similar to the CJ rudder pedal design. This means our "Your legs will
thank you" mod is available for Yaks as well. Soooo....we are now
accepting orders for the Yaks. If you are a -50 or -52 driver and want
approx. 4" extra leg room, let me know and I will add you to our
quickly growing list. We will have the prototype machined piece
(original proof of concept pieces were welded) on Friday and should be
able to spit out a production run next week.

Email me off list to place your order.

Thanks!

Barry

Barry Hancock
Worldwide Warbirds, Inc.
office (909) 606-4444
cell    (949) 300-5510
www.worldwidewarbirds.com
Express Mailing address:
7000 Merrill Ave, B-110, Unit J
Chino, CA 91710

Regular Mailing address:
7000 Merrill Ave., Box 91
Chino, CA 91710

The information contained in this e-mail message is intended only for
the personal and confidential use of the designated recipients. If the
reader of this message is not an intended recipient, you are hereby
notified that any review, use, dissemination, forwarding or copying of
this message is strictly prohibited. Please notify us immediately by
reply e-mail or telephone, and delete the original message and all
attachments from your system.  Thank you

- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
dougsappllc(at)gmail.com
Guest
PostPosted: Tue Feb 05, 2008 4:27 pm    Post subject: YAK Rudder pedal mod Reply with quote
NO WAY!! Bushi would not copy anything!! Wink
(sorry Pappy)




On Feb 5, 2008 3:59 PM, Barry Hancock <bhancock(at)worldwidewarbirds.com (bhancock(at)worldwidewarbirds.com)> wrote:
Quote:
Well, lo and behold the Yak rudder pedal design is substantially
similar to the CJ rudder pedal design. This means our "Your legs will
thank you" mod is available for Yaks as well. Soooo....we are now
accepting orders for the Yaks. If you are a -50 or -52 driver and want
approx. 4" extra leg room, let me know and I will add you to our
quickly growing list. We will have the prototype machined piece
(original proof of concept pieces were welded) on Friday and should be
able to spit out a production run next week.

Email me off list to place your order.

Thanks!

Barry

Barry Hancock
Worldwide Warbirds, Inc.
office (909) 606-4444
cell (949) 300-5510
www.worldwidewarbirds.com


Express Mailing address:
7000 Merrill Ave, B-110, Unit J
Chino, CA 91710

Regular Mailing address:
7000 Merrill Ave., Box 91
Chino, CA 91710

The information contained in this e-mail message is intended only for
the personal and confidential use of the designated recipients. If the
reader of this message is not an intended recipient, you are hereby
notified that any review, use, dissemination, forwarding or copying of
this message is strictly prohibited. Please notify us immediately by
reply e-mail or telephone, and delete the original message and all
attachments from your system. Thank you

--
Always Yakin,
Doug Sapp
Phone 509-826-4610
Fax 509-826-3644 [quote][b]

- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
cjpilot710(at)aol.com
Guest
PostPosted: Tue Feb 05, 2008 4:52 pm    Post subject: YAK Rudder pedal mod Reply with quote
In a message dated 2/5/2008 7:28:16 P.M. Eastern Standard Time, dougsappllc(at)gmail.com writes:

Geee wisss Doug. Did you ever notice how all the throttle quadrants on WWII fighters look alike? And the B-17 and B-24 use the same prop and wheels and brakes? They all even carried the same radios. Even the piss tubes were the same. And did you ever notice that Tupelofs used the same gear handle as the Yaks?

There maybe a lot parts that came from the Yaks they had laying around and their productions lines were turning out, but the CJ-6 is a different animal. You need to go back to Belize. I think you're getting grumpy from having to be back in the cold. Your wife was doing fine without you. Wink))

Pappy.
Quote:
NO WAY!! Bushi would not copy anything!! Wink
(sorry Pappy)




On Feb 5, 2008 3:59 PM, Barry Hancock <bhancock(at)worldwidewarbirds.com (bhancock(at)worldwidewarbirds.com)> wrote:
Quote:
Well, lo and behold the Yak rudder pedal design is substantially
similar to the CJ rudder pedal design. This means our "Your legs will
thank you" mod is available for Yaks as well. Soooo....we are now
accepting orders for the Yaks. If you are a -50 or -52 driver and want
approx. 4" extra leg room, let me know and I will add you to our
quickly growing list. We will have the prototype machined piece
(original proof of concept pieces were welded) on Friday and should be
able to spit out a production run next week.

Email me off list to place your order.

Thanks!

Barry

Barry Hancock
Worldwide Warbirds, Inc.
office (909) 606-4444
cell   (949) 300-5510
www.worldwidewarbirds.com
Express Mailing address:
7000 Merrill Ave, B-110, Unit J
Chino, CA 91710

Regular Mailing address:
7000 Merrill Ave., Box 91
Chino, CA 91710

The information contained in this e-mail message is intended only for
the personal and confidential use of the designated recipients. If the
reader of this message is not an intended recipient, you are hereby
notified that any review, use, dissemination, forwarding or copying of
this message is strictly prohibited. Please notify us immediately by
reply e-mail or telephone, and delete the original message and all
attachments from your system. Thank you

--
Always Yakin,
Doug Sapp
Phone 509-826-4610
Fax 509-826-3644
Quote:





Who's never won? Biggest Grammy Award surprises of all time on AOL Music.
[quote][b]

- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
brian-1927(at)lloyd.com
Guest
PostPosted: Tue Feb 05, 2008 5:13 pm    Post subject: YAK Rudder pedal mod Reply with quote
On Feb 5, 2008, at 4:24 PM, doug sapp wrote:

Quote:
NO WAY!! Bushi would not copy anything!! Wink

Of course he/they did. Actually, they were already making Yak-18
rudder pedal assemblies and just used them. They did the same with a
lot of accessories too. Seems sensible to me that, if you are already
making that subassembly for something else, you may as well use it
over again.

I used to have a Lotus Europa S2. Everything in that car came from
some other car. One could go down and order a lower outboard u-joint
for a Lotus Europa S2, pay $100, and then wait three weeks for it to
get there. On the other hand, one could order a u-joint for a Volvo
122, pay $12, and have the guy behind the counter just hand it to you
right then.

And, funny thing, in spite of the parts interchangeability, no one
seemed to think that the Lotus Europa was a Volvo 122 or a Triumph
Spitfire (the front axle/brake assembly was from a Spitfire).

Brian Lloyd 3191 Western Drive
brianl AT lloyd DOT com Cameron Park, CA 95682
+1.916.367.2131 (voice) +1.270.912.0788 (fax)

PGP key ID: 12095C52A32A1B6C
PGP key fingerprint: 3B1D BA11 4913 3254 B6E0 CC09 1209 5C52 A32A 1B6C

- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
brian-1927(at)lloyd.com
Guest
PostPosted: Tue Feb 05, 2008 5:15 pm    Post subject: YAK Rudder pedal mod Reply with quote
On Feb 5, 2008, at 4:49 PM, cjpilot710(at)aol.com wrote:

Quote:
There maybe a lot parts that came from the Yaks they had laying
around and their productions lines were turning out, but the CJ-6 is
a different animal. You need to go back to Belize. I think you're
getting grumpy from having to be back in the cold. Your wife was
doing fine without you. Wink))

Pappy,

He wasn't gettin' any down there and it all backed up into his brain.
It is a common problem. We just need to feel sorry for ol' Doug and
wish him well. Perhaps he will get better.

Brian Lloyd 3191 Western Drive
brianl AT lloyd DOT com Cameron Park, CA 95682
+1.916.367.2131 (voice) +1.270.912.0788 (fax)

PGP key ID: 12095C52A32A1B6C
PGP key fingerprint: 3B1D BA11 4913 3254 B6E0 CC09 1209 5C52 A32A 1B6C

- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
dougsappllc(at)gmail.com
Guest
PostPosted: Tue Feb 05, 2008 5:35 pm    Post subject: YAK Rudder pedal mod Reply with quote
I realize that it's real hard to see me grinning via email, but trust me I am. Glad to see you still out there and paying attention Jimbo. ;0) It was just to good to pass up.



On Feb 5, 2008 4:49 PM, <cjpilot710(at)aol.com (cjpilot710(at)aol.com)> wrote:
Quote:
In a message dated 2/5/2008 7:28:16 P.M. Eastern Standard Time, dougsappllc(at)gmail.com (dougsappllc(at)gmail.com) writes:

Geee wisss Doug. Did you ever notice how all the throttle quadrants on WWII fighters look alike? And the B-17 and B-24 use the same prop and wheels and brakes? They all even carried the same radios. Even the piss tubes were the same. And did you ever notice that Tupelofs used the same gear handle as the Yaks?

There maybe a lot parts that came from the Yaks they had laying around and their productions lines were turning out, but the CJ-6 is a different animal. You need to go back to Belize. I think you're getting grumpy from having to be back in the cold. Your wife was doing fine without you. Wink))

Pappy.
Quote:
NO WAY!! Bushi would not copy anything!! Wink
(sorry Pappy)




On Feb 5, 2008 3:59 PM, Barry Hancock <bhancock(at)worldwidewarbirds.com (bhancock(at)worldwidewarbirds.com)> wrote:
Quote:
Well, lo and behold the Yak rudder pedal design is substantially
similar to the CJ rudder pedal design. This means our "Your legs will
thank you" mod is available for Yaks as well. Soooo....we are now
accepting orders for the Yaks. If you are a -50 or -52 driver and want
approx. 4" extra leg room, let me know and I will add you to our
quickly growing list. We will have the prototype machined piece
(original proof of concept pieces were welded) on Friday and should be
able to spit out a production run next week.

Email me off list to place your order.

Thanks!

Barry

Barry Hancock
Worldwide Warbirds, Inc.
office (909) 606-4444
cell (949) 300-5510
www.worldwidewarbirds.com


Express Mailing address:
7000 Merrill Ave, B-110, Unit J
Chino, CA 91710

Regular Mailing address:
7000 Merrill Ave., Box 91
Chino, CA 91710

The information contained in this e-mail message is intended only for
the personal and confidential use of the designated recipients. If the
reader of this message is not an intended recipient, you are hereby
notified that any review, use, dissemination, forwarding or copying of
this message is strictly prohibited. Please notify us immediately by
reply e-mail or telephone, and delete the original message and all
attachments from your system. Thank you

--
Always Yakin,
Doug Sapp
Phone 509-826-4610
Fax 509-826-3644
Quote:






Who's never won? Biggest Grammy Award surprises of all time on AOL Music.
Quote:



--
Always Yakin,
Doug Sapp
Phone 509-826-4610
Fax 509-826-3644 [quote][b]

- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group