 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
jesse(at)saintaviation.co
Guest
|
 Posted: Thu Feb 07, 2008 12:14 pm Post subject: Ignition Switch Drawing |
 |
|
Does anybody have a CAD drawing of the cutout for the standard ACS Ignition/Mag/Start keyswitch?
do not archive
Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com (jesse(at)saintaviation.com)
Cell: 352-427-0285
Fax: 815-377-3694
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
Bill Schlatterer
Joined: 09 Jan 2006
Posts: 195
|
| Posted: Thu Feb 07, 2008 6:31 pm Post subject: Ignition Switch Drawing |
|
|
"cutout" ? No CAD drawing but it's a .860 plus or minus call it a 7/8 round hole unless I'm missing something. It does have an internal key slot but I think that's more for the trim ring position than anything else.
Bill S
7a Ark
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Jesse Saint
Sent: Thursday, February 07, 2008 12:12 PM
To: rv10-list(at)matronics.com
Subject: Ignition Switch Drawing
Does anybody have a CAD drawing of the cutout for the standard ACS Ignition/Mag/Start keyswitch?
do not archive
Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com (jesse(at)saintaviation.com)
Cell: 352-427-0285
Fax: 815-377-3694
[quote]
href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
[b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
jesse(at)saintaviation.co
Guest
|
| Posted: Thu Feb 07, 2008 7:06 pm Post subject: Ignition Switch Drawing |
|
|
The position and size of that slot is what I am wanting. It keeps the switch from rotating in the hole and gets it perfectly aligned to start with.
do not archive
Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com (jesse(at)saintaviation.com)
Cell: 352-427-0285
Fax: 815-377-3694
On Feb 7, 2008, at 9:26 PM, Bill Schlatterer wrote:
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
sam(at)fr8dog.net
Guest
|
| Posted: Fri Feb 08, 2008 6:00 am Post subject: Ignition Switch Drawing |
|
|
That notch keep the switch from rotating during normal use, very important for a mag switch.
Sam
Bill Schlatterer wrote: [quote] "cutout" ? No CAD drawing but it's a .860 plus or minus call it a 7/8 round hole unless I'm missing something. It does have an internal key slot but I think that's more for the trim ring position than anything else.
Bill S
7a Ark
From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Jesse Saint
Sent: Thursday, February 07, 2008 12:12 PM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: Ignition Switch Drawing
Does anybody have a CAD drawing of the cutout for the standard ACS Ignition/Mag/Start keyswitch?
do not archive
Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com (jesse(at)saintaviation.com)
Cell: 352-427-0285
Fax: 815-377-3694
_popupControl();[b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Bill Schlatterer
Joined: 09 Jan 2006
Posts: 195
|
| Posted: Fri Feb 08, 2008 6:22 pm Post subject: Ignition Switch Drawing |
|
|
OK, Sam,...I give  And I'm sure this is beginner stuff but are you saying that the hole in the panel should match the hole in the trim ring with the internal tooth? See picture. If so, how do you drill a round hole in the panel leaving an internal "tooth" to fit the slot on the barrel of the switch? The barrel is like a big toggle switch but without the key/tab washer to keep it from turning.
The internal tooth on the trim ring positions the trim ring to the switch positions but I have no idea how you would make a similar hole in the panel to mount it in without a lot of work or a CNC machine. With the bezel nut reasonably tight, mine won't turn but then it's not flying/vibrating yet either.
BTW, there was no lock washer or locking tab with my switch that I remember? If I'm missing something here, I need to fix it!
Thanks Bill S
Do not archive
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Sam Marlow
Sent: Friday, February 08, 2008 7:42 AM
To: rv10-list(at)matronics.com
Subject: Re: Ignition Switch Drawing
That notch keep the switch from rotating during normal use, very important for a mag switch.
Sam
Bill Schlatterer wrote:
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
13.54 KB |
| Viewed: |
205 Time(s) |
|
|
|
| Back to top |
|
|
acs(at)acspropeller.com.a
Guest
|
| Posted: Fri Feb 08, 2008 9:34 pm Post subject: Ignition Switch Drawing |
|
|
Bill, trace the inside of the key switch plate onto your panel. You need to make a hole "smaller" than the final cutout. The tooth is created manually by filing/cutting/whatever method you choose. It can take a lot of time and is finicky but use a step drill to cutout the major portion up to the internal diameter of the tooth. Create the tooth or "tab" by enlarging the hole with careful filing either side of your tab outline that you drew onto the panel. It doesn't have to be a masterpiece, as the hole is neatly tidied up and covered by the switch plate.
The switch should come with a switch plate, a hexagonal rear locking nut and a screw down circular face at the front.
John 40315
[quote] ---
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
sam(at)fr8dog.net
Guest
|
| Posted: Sat Feb 09, 2008 2:53 pm Post subject: Ignition Switch Drawing |
|
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
