 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Tim Juhl
Joined: 21 Mar 2006
Posts: 488
Location: "Thumb" of Michigan
|
 Posted: Sun Feb 17, 2008 5:06 pm Post subject: XL / Jabiru Dual throttles |
 |
|
I'm working on my firewall right now and trying to see how everything is going to fit. I bought the dual throttle kit for the Jab 3300 and in checking the installation instructions find that they don't exactly apply in my case.
From what I can see, earlier XL's had a flat shelf to which the dual throttle was installed and a metal tab added to which the center cable to the carb was fitted.
My XL has a beefed up shelf with angles added to the top so I need somewhere else to attach the thottle cable to the carb.
If there is anyone else out there who installed JabiruUSA's dual throttle kit onto a shelf like mine would you mind telling me what you chose to do?
If I just attach the throttle cable to the shelf itself I should get about 45 mm of cable travel. Is that enough?
Tim
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
_________________
______________
CFII
Champ L16A flying
Zodiac XL - Jabiru 3300A
Almost done! It'll fly in spring! |
|
| Back to top |
|
 |
jeffrey_davidson(at)earth
Guest
|
| Posted: Sun Feb 17, 2008 9:07 pm Post subject: XL / Jabiru Dual throttles |
|
|
Tim,
The new HomebuiltHelp video on the Jabiru covers this. But even
with the old shelf, I had to re-configure the dual throttle option. And you
can call Pete or Ben for help too. In short, the center throttle cable goes
through a hole in the shelf down to the carby. I picture of my installation
in progress is attached.
Jeff D.
| Quote: | From what I can see, earlier XL's had a flat shelf to which the dual
throttle was installed and a metal tab added to which the center cable to
|
the carb was fitted.
My XL has a beefed up shelf with angles added to the top so I need somewhere
else to attach the thottle cable to the carb.
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
| Description: |
|
| Filesize: |
174.51 KB |
| Viewed: |
485 Time(s) |
|
|
|
| Back to top |
|
|
DaveG601XL
Joined: 27 Oct 2006
Posts: 351
Location: Cincinnati, Oh
|
| Posted: Mon Feb 18, 2008 3:55 am Post subject: Re: XL / Jabiru Dual throttles |
|
|
Tim,
I don't have much to add to what Jeff already said other than to add a few close-up pictures of mine with the new firewall shelf configuration. I did not measure my degrees of motion, but there is enough to fully actuate the throttle from stop-to-stop with some to spare. Also, the brass cable adjuster going into the carby needs a bend to avoid the nose gear strut. As recommended by Jabiru, I used a tube bender. Just make sure not to make your bend right where the brass transitions from thick wall to thin wall. I will break there if you do. Look down the inside of it to see where it transitions.
Good Luck,
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
| Description: |
|
| Filesize: |
162.24 KB |
| Viewed: |
474 Time(s) |
|
| Description: |
|
| Filesize: |
150.17 KB |
| Viewed: |
479 Time(s) |
|
_________________
David Gallagher
Cincinnati, OH area |
|
| Back to top |
|
|
Tim Juhl
Joined: 21 Mar 2006
Posts: 488
Location: "Thumb" of Michigan
|
| Posted: Mon Feb 18, 2008 9:14 am Post subject: Re: XL / Jabiru Dual throttles |
|
|
Dave & Jeff,
You guys are outstanding! Just what I needed to know and see. I really appreciate the help.
Tim
PS. I ordered the homebuilt help DVD but it hasn't arrived yet.
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
_________________
______________
CFII
Champ L16A flying
Zodiac XL - Jabiru 3300A
Almost done! It'll fly in spring! |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
