|
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
Dave(at)AirCraftersLLC.co Guest
|
Posted: Mon Mar 10, 2008 8:49 pm Post subject: Plane Power's Friendly Warning Light |
|
|
B&C's flashing warning light is pretty annoying, so I was glad to see Plane Power's light is a steady, happy glow.
Trouble is, it turns out, that the annoying flash is pretty handy when you really need to see it...no equipment failures to report, just didn't use the checklist...twice >
So, does anyone have a suggestion as to how to wire a flasher into the PP light? Can I just use a simple automotive flasher, or do I need something designed for less current? I want a fairly high (annoying) flash rate.
Hope I don't need a horn.
Thanks,
Dave Saylor
AirCrafters LLC
140 Aviation Way
Watsonville, CA
831-722-9141
831-750-0284 CL
www.AirCraftersLLC.com
[quote][b]
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Back to top |
|
|
nuckolls.bob(at)cox.net Guest
|
Posted: Tue Mar 11, 2008 6:47 am Post subject: Plane Power's Friendly Warning Light |
|
|
At 09:46 PM 3/10/2008 -0700, you wrote:
Quote: | B&C's flashing warning light is pretty annoying, so I was glad to see
Plane Power's light is a steady, happy glow.
|
If I recall correctly, the Plane Power warning
light drives from the alternator fail output of
the built-in regulator. While certainly better than
no light, it's not an independent monitor of
alternator/regulator performance.
You might consider a separate LV Warning
system that flashes the light.
Quote: |
Trouble is, it turns out, that the annoying flash is pretty handy when you
really need to see it...no equipment failures to report, just didn't use
the checklist...twice >
|
Yup, when we crafted that system the flash rate
was set at approx 3 flashes per second. Supposedly
this is the rate most 'irritating', i.e. attention
getting for cockpit warning lamps.
Bill also supplied a 6v lamp for the 14V regulators
to increase intensity of the lamp for sunlight viewability.
Quote: |
So, does anyone have a suggestion as to how to wire a flasher into the PP
light? Can I just use a simple automotive flasher, or do I need something
designed for less current? I want a fairly high (annoying) flash rate.
|
The simplest method for adding flashing to
an existing lamp circuit is by means of a "two-wire
lamp flasher". There are a number of variations
on the theme. One such circuit is illustrated here:
http://www.aeroelectric.com/Pictures/Schematics/Lamp_Flasher_1.pdf
This circuit should be assembled with a C-Mos
version of the ubiquitous 555 timer. In this
case, the Intersil ICM7555 is called out.
This flasher will deliver a symmetrical ON-OFF
flash pattern at approx 3Hz.
An alternative is shown at:
http://www.aeroelectric.com/Pictures/Schematics/Lamp_Flasher_2.pdf
This is built from more generic discrete parts
and can probably be made to do what you want to
accomplish although its not likely to be a
symmetrical pattern.
Bob . . .
----------------------------------------)
( . . . a long habit of not thinking )
( a thing wrong, gives it a superficial )
( appearance of being right . . . )
( )
( -Thomas Paine 1776- )
----------------------------------------
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|