|
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
bcchurch
Joined: 10 Dec 2007 Posts: 25 Location: Racine, WI
|
Posted: Wed Mar 19, 2008 3:01 pm Post subject: Primer for semi-exposed steel |
|
|
Please - remain calm and let's not start a primer war.
With winter in Wisconsin starting to break, I finally got started on my 801 kit and have the elevator skeleton ready to rivet. I'm using PTI Zinc Oxide for the aluminum but was unsure about what to do for the elevator outboard hinge pin 8H3-2. This part is steel and will be in direct contact with the outboard tip rib. I'd like some advice from the group about how to corrosion protect in this situation. Is a simple self-etching primer for the steel hinge pin sufficient? Does it need something more? I've read some postings from the archives but nothing seemed to address this situation.
Thanks,
Ben
| - The Matronics Zenith-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
_________________ Ben Church
CH801
Racine, WI |
|
Back to top |
|
|
Tim Juhl
Joined: 21 Mar 2006 Posts: 488 Location: "Thumb" of Michigan
|
Posted: Wed Mar 19, 2008 4:28 pm Post subject: Re: Primer for semi-exposed steel |
|
|
I'm building a XL so I'm not familiar with the hinge you describe. If it is in a moving hinge then pretty much anything you put on it will get scraped off eventually. Self-etching primer typically will not prevent rusting unless topcoated with enamel or the like. It might be a case where something like ACF-50 would be a good choice. It lubricates and protects against corrosion (see http://www.corrosion-control.com/acf50.html)
Tim
Do not archive
| - The Matronics Zenith-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
_________________ ______________
CFII
Champ L16A flying
Zodiac XL - Jabiru 3300A
Almost done! It'll fly in spring! |
|
Back to top |
|
|
av8or(at)cox.net Guest
|
Posted: Wed Mar 19, 2008 4:28 pm Post subject: Primer for semi-exposed steel |
|
|
I prefer powder coating all steel parts. Easy to do (or have done). Then you can paint to a finish coat color if needed (ie. exposed).
JT
[quote] ---
| - The Matronics Zenith-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
Back to top |
|
|
psm(at)ATT.NET Guest
|
Posted: Thu Mar 20, 2008 8:21 pm Post subject: Primer for semi-exposed steel |
|
|
If the information I learned about powder coating is accurate, then using this process in the engine compartment of an airplane is close to suicidal.
When I attended an EAA chapter meeting at a powder coating company, I learned this process is mostly a way to get polyurethane paint on stuff. I also know that polyurethane produces Hydrogen Cyanide when burned. This is the stuff many states used for many years to execute people. It is incredibly poisonous. To put this material in an engine compartment where there are FIRES seems like the epitome of foolish moves.
Paul
XL fuselage
At 05:28 PM 3/19/2008, you wrote:
[quote]I prefer powder coating all steel parts. Easy to do (or have done). Then you can paint to a finish coat color if needed (ie. exposed).
JT[b]
| - The Matronics Zenith-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
Back to top |
|
|
planecrazydld(at)yahoo.co Guest
|
Posted: Fri Mar 21, 2008 3:40 am Post subject: Primer for semi-exposed steel |
|
|
one of the reasons that engine mounts were routinely painted with ZCP was to allow easy detection of cracks very early in their growth. The more finish, usually, the more ductile the coating and the slower a crack fractures the coating...
Paul Mulwitz <psm(at)att.net> wrote:[quote] If the information I learned about powder coating is accurate, then using this process in the engine compartment of an airplane is close to suicidal.
When I attended an EAA chapter meeting at a powder coating company, I learned this process is mostly a way to get polyurethane paint on stuff. I also know that polyurethane produces Hydrogen Cyanide when burned. This is the stuff many states used for many years to execute people. It is incredibly poisonous. To put this material in an engine compartment where there are FIRES seems like the [quote][b]
| - The Matronics Zenith-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|