Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

KLN90B Lighting

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
cfi(at)conwaycorp.net
Guest





PostPosted: Mon Mar 31, 2008 4:08 pm    Post subject: KLN90B Lighting Reply with quote

I’m working on the wiring harness for my KLN90B GPS. The instructions for the lighting circuits are not 100% clear to me. There are three pins for a 14V install: two for “Lighting Bus Low” (pins 28 and 32) and one “14 V DC Panel Lighting Bus"/HI (pin 29) (figures 2-1 and 2-17 from the installation manual are attached). Where should these be sourced? More specifically, what is a “LO” source? Is the “14 V DC Panel Lighting Bus” the dimmer switch? …or am I wrong on both counts? Is there something else that I’m missing? This will be a VFR installation.
<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" />
Thanks,
Michael H.


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List



KLN90B_fig_2-17.pdf
 Description:

Download
 Filename:  KLN90B_fig_2-17.pdf
 Filesize:  75.31 KB
 Downloaded:  108 Time(s)


KLN90B_fig_2-1.pdf
 Description:

Download
 Filename:  KLN90B_fig_2-1.pdf
 Filesize:  74.67 KB
 Downloaded:  167 Time(s)

Back to top
iredgar(at)gmail.com
Guest





PostPosted: Mon Mar 31, 2008 5:13 pm    Post subject: KLN90B Lighting Reply with quote

Michael,
I suspect the LO connections are just panel lighting grounds and HI is
supply voltage for your panel lighting. There may be other opinions on this


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
nuckolls.bob(at)cox.net
Guest





PostPosted: Mon Mar 31, 2008 5:48 pm    Post subject: KLN90B Lighting Reply with quote

At 07:01 PM 3/31/2008 -0500, you wrote:

Quote:
I’m working on the wiring harness for my KLN90B GPS. The instructions for
the lighting circuits are not 100% clear to me. There are three pins for
a 14V install: two for “Lighting Bus Low” (pins 28 and 32) and one “14 V
DC Panel Lighting Bus"/HI (pin 29) (figures 2-1 and 2-17 from the
installation manual are attached). Where should these be sourced? More
specifically, what is a “LO” source? Is the “14 V DC Panel Lighting Bus”
the dimmer switch? …or am I wrong on both counts? Is there something
else that I’m missing? This will be a VFR installation.'


There are two strings of 14v lights in series. The
14V wiring grounds the top end of the 28V string
and drives the center with the two ends in parallel.

For 28V, the 14V center tap is left open and one
of the 14V "lo" connections becomes the 28V
lighting load.

Bob . . .


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
gfr56(at)comcast.net
Guest





PostPosted: Mon Mar 31, 2008 6:13 pm    Post subject: KLN90B Lighting Reply with quote

An avionics guy explained to that Low is another word for ground. My icom and ps engineering audio panel used the same terms and that is how I wired them.
Jerry
[quote] ---


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
mlas(at)cox.net
Guest





PostPosted: Tue Apr 01, 2008 7:22 am    Post subject: KLN90B Lighting Reply with quote

Ian,

Your are correct!

Mike

--


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
mlas(at)cox.net
Guest





PostPosted: Tue Apr 01, 2008 7:23 am    Post subject: KLN90B Lighting Reply with quote

Bob,

No offence, but based on the writing of the original post, I think your
reply will be considered more confusing then the King notes on the
drawing. Just having a little fun!

Mike

--


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
mlas(at)cox.net
Guest





PostPosted: Tue Apr 01, 2008 7:27 am    Post subject: KLN90B Lighting Reply with quote

Jerry,

Also correct. 14v = Positive (HI) pin 29. Bus ground (LO) pin 28 & 32.
 
28v = Positive (Hi) pin 28. Bus ground (LO) pin 32
Mike

--


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group