Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Dent

Matronics Email Lists Forum Index -> Kolb-List

View previous topic :: View next topic

Author Message

williamtsullivan(at)att.n
Guest

Posted: Thu Apr 10, 2008 6:41 pm Post subject: Dent

Dana- I have about an 18" long 3/8" extension you can borrow, but no dent expander. I could meet you and pass it over.

  Possums- how heavy is that gap seal? also, I have to fuel from the top- I have the modified 10 gallon tank with the BRS mounted under it, firing through the fabric.

   

                                                        Bill Sullivan

                                                         FS/KX/447

                                                        Windsor Locks, Ct.

 [quote][b]

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

Possums

Joined: 03 Nov 2007
Posts: 247

Posted: Thu Apr 10, 2008 6:56 pm Post subject: Dent

 	  Quote: 	
		  

Possums- how heavy is that gap seal? also, I have to fuel from the 

top- I have the modified 10 gallon tank with the BRS mounted under 

it, firing through the fabric.



                                                       Bill Sullivan


	


I probably weighs about 1 or 2 pounds max - with the sound insulation 

?? I'll check it if you want.

But if your going Part 103 - you can't afford 2 lbs.

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
Possum

Dana

Joined: 13 Dec 2007
Posts: 1047
Location: Connecticut, USA

Posted: Thu Apr 10, 2008 7:02 pm Post subject: Dent

At 10:36 PM 4/10/2008, william sullivan wrote:

 	  Quote: 	
		  Dana- I have about an 18" long 3/8" extension you can borrow, but no dent 

expander. I could meet you and pass it over.


	


Thanks... I have a bunch of extensions (though not 8' worth!) and an 

expander... though I imagine that the dent is as is no weaker than a dent 

subjected to the added fatigue of rebending it back straight again.



-Dana



do not archive

--

  Help Wanted: Telepath. You know where to apply.

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

Dana

Joined: 13 Dec 2007
Posts: 1047
Location: Connecticut, USA

Posted: Thu Apr 10, 2008 7:05 pm Post subject: Dent

Bill, if I remember, I'll bring a scale and weigh my own gap seal when I 

stop at Goodspeed on Saturday (weather looks crappy but everybody goes up 

there on Saturday mornings anyway... c'mon down and meet some other Kolb 

drivers).

-Dana

At 10:53 PM 4/10/2008, possums wrote:

 	  Quote: 	

>

>Possums- how heavy is that gap seal? also, I have to fuel from the top- I 

>have the modified 10 gallon tank with the BRS mounted under it, firing 

>through the fabric.

>

>                                                       Bill Sullivan

I probably weighs about 1 or 2 pounds max - with the sound insulation ?? 

I'll check it if you want.

But if your going Part 103 - you can't afford 2 lbs.

--

  Help Wanted: Telepath. You know where to apply.

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Kolb-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum