Matronics Email Lists :: View topic - External door handles

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

External door handles

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

craigb(at)onthenet.com.au
Guest

Posted: Sat Apr 26, 2008 2:50 pm Post subject: External door handles

Just wondering if anyone has done anything special with their door handles

with regard

to steamlining. I was looking at the flush mount ones from ACS that are used

on the liberty

but worry they will be too deep to fit in the door. I was thinking that a

blended fillet

starting at the front of the door coming out about 20mm high and deep then

blending back in about 2/3 the

way along the door with the handle set into this so it is effectively flush

with the skin of the door.

I have seen the "aerofoil" shaped handles which would be my next choice.



regards



craig



Checked by AVG.

2:31 PM

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

fklein(at)orcasonline.com
Guest

Posted: Sat Apr 26, 2008 4:24 pm Post subject: External door handles

 	  Quote: 	
		   

 <craigb(at)onthenet.com.au>



 Just wondering if anyone has done anything special with their door 

 handles

 with regard to steamlining.


	


Craig...I thought someone would never ask...see pixs below



Fred

A194



-- 

This message has been scanned for viruses and

dangerous content by MailScanner, and is

believed to be clean.



Roll 41 - 45



Roll 41 - 47



Roll 41 - 48





Roll 41 - 49





Roll 41 - 50





Roll 41 - 51





Roll 41 - 52

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

iPhotoiPhoto-mailtmp-0.jpg

Description:

Filesize:

107.85 KB

Viewed:

323 Time(s)

iPhotoiPhoto-mailtmp-2.jpg

Description:

Filesize:

76.49 KB

Viewed:

335 Time(s)

iPhotoiPhoto-mailtmp-4.jpg

Description:

Filesize:

102.38 KB

Viewed:

332 Time(s)

iPhotoiPhoto-mailtmp-5.jpg

Description:

Filesize:

93.1 KB

Viewed:

324 Time(s)

iPhotoiPhoto-mailtmp-6.jpg

Description:

Filesize:

45.91 KB

Viewed:

332 Time(s)

iPhotoiPhoto-mailtmp-7.jpg

Description:

Filesize:

55.58 KB

Viewed:

320 Time(s)

n100rh(at)sbcglobal.net
Guest

Posted: Sat Apr 26, 2008 5:23 pm Post subject: External door handles

Fred,

One beautiful job you've done there. I will be using you're design 

Ralph

mg xs

Reno, NV



Fred Klein wrote:

 	  Quote: 	
		  > 

> <craigb(at)onthenet.com.au>

>

> Just wondering if anyone has done anything special with their door 

> handles

> with regard to steamlining.



 Craig...I thought someone would never ask...see pixs below



 Fred

 A194





 ------------------------------------------------------------------------

 Roll 41 - 45





 ------------------------------------------------------------------------

 Roll 41 - 47



 Roll 41 - 48



 ------------------------------------------------------------------------

 Roll 41 - 49



 ------------------------------------------------------------------------

 Roll 41 - 50



 ------------------------------------------------------------------------

 Roll 41 - 51



 ------------------------------------------------------------------------

 Roll 41 - 52

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

craigb(at)onthenet.com.au
Guest

Posted: Sat Apr 26, 2008 5:42 pm Post subject: External door handles

I take it you havnt painted your bird yet, I just wonder if it might wear

the paint where the handle rubs the skin,or do you have a plan

with regard to that, other than that it looks good, and self locking which

is a bonus



--

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

fklein(at)orcasonline.com
Guest

Posted: Sat Apr 26, 2008 7:24 pm Post subject: External door handles

On Saturday, Apr 26, 2008, at 18:40 US/Pacific, craig bastin wrote:



 	  Quote: 	
		   I just wonder if it might wear the paint where the handle rubs the 

 skin,or do you have a plan

 with regard to that


	


Craig,



Yes, that's a concern...still scratchin my head about it...expect to 

find something superslick to coat the edges...maybe silicone, 

teflon...any ideas?



Figured that was solvable and I liked the fillet w/ no gap for 

moisture, lack of draginess...



(definition of "draginess": same relation to drag as "truthiness" has 

to truth; i.e., it wants to have the appearance of minimal drag, it may 

not however, though overall, it probably makes no difference,)



cheers,



Fred

-- 

This message has been scanned for viruses and

dangerous content by MailScanner, and is

believed to be clean.

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

dglauser(at)gmail.com
Guest

Posted: Sat Apr 26, 2008 7:53 pm Post subject: External door handles

How about an ultra-low friction plastic? McMaster-Carr has PTFE in

adhesive backed sheets in a variety of thicknesses. see page 3507 (!)

of the catalog. Or should I say catalogue?

David

On Sat, Apr 26, 2008 at 8:20 PM, Fred Klein <fklein(at)orcasonline.com> wrote:

 	  Quote: 	

 On Saturday, Apr 26, 2008, at 18:40 US/Pacific, craig bastin wrote:

 > I just wonder if it might wear the paint where the handle rubs the skin,or

 do you have a plan

 > with regard to that

 >

 Craig,

 Yes, that's a concern...still scratchin my head about it...expect to find

 something superslick to coat the edges...maybe silicone, teflon...any ideas?

 Figured that was solvable and I liked the fillet w/ no gap for moisture,

 lack of draginess...

 (definition of "draginess": same relation to drag as "truthiness" has to

 truth; i.e., it wants to have the appearance of minimal drag, it may not

 however, though overall, it probably makes no difference,)

 cheers,

 Fred

 --

 This message has been scanned for viruses and

 dangerous content by MailScanner, and is

 believed to be clean.

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

DanBish

Joined: 24 May 2006
Posts: 29
Location: TUCSON, AZ

Posted: Sun Apr 27, 2008 8:47 am Post subject: External door handles

For some reason the photos didn't come through in this post. Any chance you could post them again or put them somewhere in the gallery?



Thanks,



Dan

Visit -  www.EuropaOwners.org

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

fklein(at)orcasonline.com
Guest

Posted: Sun Apr 27, 2008 1:23 pm Post subject: External door handles

On Sunday, Apr 27, 2008, at 09:43 US/Pacific, danbish wrote:



 	  Quote: 	
		   

 <danbish(at)norwalktucson.com>



 For some reason the photos didn't come through in this post. Any 

 chance you could post them again or put them somewhere in the gallery?




	


Dan...tried to send them to you direct but connection failed w/ this 

msg:



Fred



 	  Quote: 	
		  >>> DATA

 <<< 571 danbish(at)norwalktucson.com prohibited. We do not relay

 554 5.0.0 Service unavailable

 <<< 554 no valid RCPT address specified

 Reporting-MTA: dns; smtp.orcasonline.com

 Arrival-Date: Sun, 27 Apr 2008 14:15:04 -0700



 Final-Recipient: RFC822; danbish(at)norwalktucson.com

 Action: failed

 Status: 5.0.0

 Remote-MTA: DNS; server112.appriver.com

 Diagnostic-Code: SMTP; 571 danbish(at)norwalktucson.com prohibited. We do 

 not relay

 Last-Attempt-Date: Sun, 27 Apr 2008 14:15:23 -0700




	




-- 

This message has been scanned for viruses and

dangerous content by MailScanner, and is

believed to be clean.

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum