Matronics Email Lists :: View topic - Warning! Cut your spinners, not your props!

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Warning! Cut your spinners, not your props!

Matronics Email Lists Forum Index -> Lightning-List

View previous topic :: View next topic

Author Message

pequeajim

Joined: 03 Sep 2006
Posts: 708
Location: New Holland, PA

Posted: Sat May 10, 2008 7:56 pm Post subject: Warning! Cut your spinners, not your props!

Sorry, I’m sending this again because the picture size was too big.  

Hopefully this will make it through…  

 <<...>>  <<...>>   

To all:  

Please beware that if you are using the new aluminum spinner with one of the fixed  pitched wooden propellers, you will need to grind out some relief so that the spinner does not cut in to the prop.  

It only take about 15-20 minutes.  Go slow with a dremel and be careful not to let it slip and dig into the surface of the spinner face.  

See attached pics…  

1998 shows where to cut.  

2000 show the fit after cutting.  

Hope this helps.  

Jim!

- The Matronics Lightning-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Lightning-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Lightning-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum