Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Building Spars

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

rlalonde

Joined: 20 Nov 2006
Posts: 43

Posted: Sun Jun 01, 2008 7:17 am Post subject: Building Spars

How many of you scratch builders have actually  built your spars? Have heard that many buy the spars for their  project.

  

 Ron

   [quote][b]

wscribb(at)centurytel.net
Guest

Posted: Sun Jun 01, 2008 7:52 am Post subject: Building Spars

Ron,

  

 I built the spars for my 601XL project.   

  

 Bill Cribb

 601XL/Corvair both scratch built

  

  



   From: owner-zenith-list-server(at)matronics.com  [mailto:owner-zenith-list-server(at)matronics.com] On Behalf Of Ron  Lalonde

Sent: Sunday, June 01, 2008 8:14 AM

To:  zenith-list(at)matronics.com

Subject: Building  Spars

 

 How many of you scratch builders have actually  built your spars? Have heard that many buy the spars for their  project.

  

 Ron

[quote]



href="http://www.matronics.com/Navigator?Zenith-List">http://www.matronhref="http://forums.matronics.com">http://forums.matronics.com

href="http://www.matronics.com/contribution">http://www.matronics.com/c

[b]

carlossa52(at)gmail.com
Guest

Posted: Sun Jun 01, 2008 8:28 am Post subject: Building Spars

I did (CH601-HD), with the help of an RV builder, who had all the equipment to set solid rivets - not to mention the experience.

Carlos

Montreal, Canada



do not archive



2008/6/1 Ron Lalonde <rlalonde(at)hotmail.com (rlalonde(at)hotmail.com)>:

 [quote]       How many of you scratch builders have actually  built your spars? Have heard that many buy the spars for their  project.

  

 Ron

    	  Quote: 	
		  



	


[b]

Jeyoung65(at)aol.com
Guest

Posted: Sun Jun 01, 2008 9:15 am Post subject: Building Spars

Not sure this is what you want but i builded my spar for a 601HD.  Understand it is not lke a 601XL. Note this is about building not bad mouthing,  flying, impressing others ect. BIG SMILE  Jerry of Ga. DO NOT  ARCHIVE



Get trade secrets for amazing burgers. Watch "Cooking with Tyler Florence" on AOL Food.

  [quote][b]

sky_ranger161

Joined: 07 Jun 2006
Posts: 91

Posted: Sun Jun 01, 2008 9:25 am Post subject: Building Spars

I built mine. You can check out the whole process at: www.mykitlog.com/debo

   

  Debo Cox

  Nags Head, NC

   

  do not archive



 [quote][b]

Heatonhe36(at)msn.com
Guest

Posted: Sun Jun 01, 2008 10:08 am Post subject: Building Spars

<?xml:namespace prefix="v" /><?xml:namespace prefix="o" /><![endif]-->  Built mine a couple of years ago.  Pictures are in the archives  somewhere.

  

 Do Not Archive

  

 Herb Heaton

 Almost finished, 90% to go

 [quote]   ---

TxDave

Joined: 22 Jul 2006
Posts: 168
Location: Temple, TX

Posted: Sun Jun 01, 2008 10:10 am Post subject: Re: Building Spars

I think quite a few folks on this list have built their spars. It's fairly time consuming, but not extremely difficult.



Dave Clay

spardone2.jpg

Description:

Filesize:

80.49 KB

Viewed:

477 Time(s)

spar 025small.jpg

Description:

Filesize:

105.98 KB

Viewed:

480 Time(s)

rjscep(at)yahoo.com
Guest

Posted: Sun Jun 01, 2008 10:27 am Post subject: Building Spars

 	  Quote: 	
		   I built my spars from scratch, but when I ordered the .025 spar web, I

 was surprised that they cut it exactly 209mm. That saved me a lot of

 trimming. I managed to get the three sheets required for the ribs and the

 spar webs plus a few extra pieces cut small enough to get it into my

 station wagon. My spars are completely riveted and ready for ribs and

 skin. The spars were not that difficult to drill and rivet, at least I

 don't think so.. good luck Ron keep plugging.....Do not archive


	




--- On Sun, 6/1/08, Ron Lalonde <rlalonde(at)HOTMAIL.COM> wrote:



 	  Quote: 	
		   From: Ron Lalonde <rlalonde(at)HOTMAIL.COM>

 Subject: Building Spars

 To: zenith-list(at)matronics.com

 Date: Sunday, June 1, 2008, 4:14 PM

 How many of you scratch builders have actually built your

 spars? Have heard that many buy the spars for their

 project.

 

 Ron

Ron Lendon

Joined: 10 Jan 2006
Posts: 685
Location: Clinton Twp., MI

Posted: Sun Jun 01, 2008 12:07 pm Post subject: Re: Building Spars

I built mine and hand hammered all the solid rivets in a 1 ton arbor press.



Views of the tools:



http://mykitlog.com/users/display_log.php?user=rlendon&project=113&category=0&log=22316&row=316

100_1092.jpg

Description:

Riveting machine

Filesize:

750.25 KB

Viewed:

461 Time(s)

_________________
Ron Lendon
WW Corvair with Roy's Garage 5th bearing
CH 601 XLB
N601LT - Flying
http://www.mykitlog.com/rlendon
Corvair Engine Prints:
https://sites.google.com/site/corvairenginedata/

larry(at)macsmachine.com
Guest

Posted: Sun Jun 01, 2008 1:11 pm Post subject: Building Spars

Hi Ron,

I built the spars for my 601HDS and found the process rather basic and 

not too hard.  I used a backing

block and 2-lb sledge for the first few, but finished it with an air 

hammer and found air power to be much easier.

Bending is making a short sample, checking it and then going for the 

finish piece.

I'm sure you could do it as well.



Larry McFarland 601HDS at www.macsmachine.com



Ron Lalonde wrote:

 	  Quote: 	
		   How many of you scratch builders have actually built your spars? Have 

 heard that many buy the spars for their project.

  

 Ron

kmccune

Joined: 22 Sep 2007
Posts: 577
Location: Wisconsin, USA

Posted: Sun Jun 01, 2008 1:36 pm Post subject: Re: Building Spars

I scratch built the tail section ( Daves brake worked well for this) and next is the fuselage (trying to decide on the whole slat/VG thing, insurance guy will ultimately decide, if I can get insurance for a VG wing thats what I'll build) 

But I plan on buying the spar and all the welded parts. Mostly because of the time it would take. The process looks involved but not difficult?

So you can call me a partial scratch builder!  



Kevin 

CH 701 

SN7172

_________________
“Always do what you are afraid to do.”
R.W. Emerson (1803-1882)

"Real freedom is the sustained act of being an individual." WW - 2009

"Life is a good deal...it's worth it" Feb 1969
Dorothy McCune

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum