Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Tie Down Point

Matronics Email Lists Forum Index -> Zenith601-List

View previous topic :: View next topic

Author Message

Ianrat

Joined: 31 Mar 2008
Posts: 43
Location: Brisbane AUSTRALIA

Posted: Mon Jun 16, 2008 6:25 am Post subject: Tie Down Point

The pre-drilled tie down point in the main wing looks to be to low down.



If you use the pre drilled holes the bottom of the tie down ring will be inside the wing sheeting. Is this the way every one has done it or have you moved it out one hole.

Ianrat

16062008061.jpg

Description:

Tie Down Ring

Filesize:

700.16 KB

Viewed:

869 Time(s)

Davcoberly(at)wmconnect.c
Guest

Posted: Mon Jun 16, 2008 9:01 am Post subject: Tie Down Point

I ran into the same problem. I just moved it down one hole and put an L angle doubler behind the rib inline with the tie down holes to make up for the lost rivet.     [quote][b]

Ron Lendon

Joined: 10 Jan 2006
Posts: 685
Location: Clinton Twp., MI

Posted: Mon Jun 16, 2008 5:24 pm Post subject: Re: Tie Down Point

I don't see the problem with where it is located.  All ya do with it is thread a rope through to attach it to the earth.  I would leave it alone or call Zenith for an explanation.

_________________
Ron Lendon
WW Corvair with Roy's Garage 5th bearing
CH 601 XLB
N601LT - Flying
http://www.mykitlog.com/rlendon
Corvair Engine Prints:
https://sites.google.com/site/corvairenginedata/

austria

Joined: 09 Feb 2007
Posts: 7

Posted: Tue Jun 17, 2008 9:33 am Post subject: Re: Tie Down Point

I solved the problem in this way.

Franz

Dsc02350.jpg

Description:

Filesize:

1.4 MB

Viewed:

840 Time(s)

Ianrat

Joined: 31 Mar 2008
Posts: 43
Location: Brisbane AUSTRALIA

Posted: Wed Jun 18, 2008 4:04 am Post subject: Re: Tie Down Point

austria your idea looks good. I think that i will look into it.

Thank you



Ianrat

w8n2bup

Joined: 09 Apr 2008
Posts: 20
Location: Kansas City Area

Posted: Wed Jun 18, 2008 5:50 am Post subject: Re: Tie Down Point

Roger at Zenith, has noted this before and said you can move it up one hole and then drill out three holes (every other) and put in 3/8 bolts and lock nuts. I chose to do this also because I had to put a spacer in to bring the tie down even with the precut slot and the rivets would not have been long enough.Also, these three bolts are stronger than all the rivets would have been.

Gig Giacona

Joined: 10 Jan 2006
Posts: 1416
Location: El Dorado Arkansas USA

Posted: Wed Jun 18, 2008 7:18 am Post subject: Re: Tie Down Point

Precut slot for the tie-down. Really? Boy, you QBK guys have it easy.  



 	  w8n2bup wrote: 	
		  Roger at Zenith, has noted this before and said you can move it up one hole and then drill out three holes (every other) and put in 3/8 bolts and lock nuts. I chose to do this also because I had to put a spacer in to bring the tie down even with the precut slot and the rivets would not have been long enough.Also, these three bolts are stronger than all the rivets would have been.

_________________
W.R. "Gig" Giacona
601XL Under Construction
See my progress at www.peoamerica.net/N601WR

Ianrat

Joined: 31 Mar 2008
Posts: 43
Location: Brisbane AUSTRALIA

Posted: Thu Jun 19, 2008 4:05 am Post subject: Re: Tie Down Point

Not quick build! the standard kit now has most parts pre cut / formed and drilled. What a great kit.



Ianrat

Gig Giacona

Joined: 10 Jan 2006
Posts: 1416
Location: El Dorado Arkansas USA

Posted: Thu Jun 19, 2008 10:29 am Post subject: Re: Tie Down Point

Wow... they have changed a bunch of stuff. Do you still need a drill and shears to build the kit? 

 	  Ianrat wrote: 	
		  Not quick build! the standard kit now has most parts pre cut / formed and drilled. What a great kit.



Ianrat

_________________
W.R. "Gig" Giacona
601XL Under Construction
See my progress at www.peoamerica.net/N601WR

Ianrat

Joined: 31 Mar 2008
Posts: 43
Location: Brisbane AUSTRALIA

Posted: Fri Jun 20, 2008 4:44 am Post subject: Re: Tie Down Point

That about all you need. May be a maker pen!

w8n2bup

Joined: 09 Apr 2008
Posts: 20
Location: Kansas City Area

Posted: Mon Jun 23, 2008 5:31 am Post subject: Re: Tie Down Point

Correction to my tie down ring response. I said I used (3) 3/8 bolts. I meant (3) 3/16 bolts.

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith601-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum