Matronics Email Lists :: View topic - Z-20 and 504-1 OV Kit

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Z-20 and 504-1 OV Kit

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

ianwilson2

Joined: 06 Jan 2008
Posts: 33
Location: France

Posted: Thu Jun 19, 2008 9:38 am Post subject: Z-20 and 504-1 OV Kit

Hi All,



As part of the materials for my Z-20 based X-Air, I purchased a 504-1 OV kit from B&C as it was cheaper than the individual bits.  In the kit is a yellow warning lamp that isn't used in the Z-20 architecture.  Can I make use of the lamp to give me an 'alt off' type of indication, or maybe some other indicator or am I just being daft??  I already have the OV warn module, also from B&C, that gives me a low/high warning lamp.



Thanks in advance.



Ian

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

sonex76(at)velocity.net
Guest

Posted: Thu Jun 19, 2008 11:21 am Post subject: Z-20 and 504-1 OV Kit

Yes you can. I did just that with my Jab 3300 powered Sonex using a three 

position master Switch.



Dick Fisher

sonex76(at)velocity.net

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

nuckolls.bob(at)cox.net
Guest

Posted: Thu Jun 19, 2008 12:19 pm Post subject: Z-20 and 504-1 OV Kit

At 10:38 AM 6/19/2008 -0700, you wrote:

 	  Quote: 	
		  



Hi All,



As part of the materials for my Z-20 based X-Air, I purchased a 504-1 OV 

kit from B&C as it was cheaper than the individual bits.  In the kit is a 

yellow warning lamp that isn't used in the Z-20 architecture.  Can I make 

use of the lamp to give me an 'alt off' type of indication, or maybe some 

other indicator or am I just being daft??  I already have the OV warn 

module, also from B&C, that gives me a low/high warning lamp.


	


   Sure, if B&C is still shipping the same lamp holder

   I remember, it's a generic incandescent holder

   and lense:



http://aeroelectric.com/Pictures/Lighting/T-1-3slash4_domed_holder.jpg



   Put the right voltage bulb in it an you can use it

   for any purpose well served with an incandescent

   lamp.



    Bob . . .



        ----------------------------------------)

        ( . . .  a long habit of not thinking   )

        ( a thing wrong, gives it a superficial )

        ( appearance of being right . . .       )

        (                                       )

        (                  -Thomas Paine 1776-  )

        ----------------------------------------

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum