 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
orchidman
Joined: 10 Jul 2006
Posts: 277
Location: Oklahoma City - KRCE
|
 Posted: Mon Jun 30, 2008 6:17 am Post subject: Ramp to belly distance? |
 |
|
Can someone publish the ramp (garage floor) to belly distance with the gear on? It would be really good to get the distance both with the engine on and before it is installed.
I am in the garage with the canopy top fully trimmed but not bolted down. Standing back and looking at the project this weekend I started looking at the distance from the top to my garage door opener which also translates to what I will need for clearance rolling out of the door.
I am trying to get as much of the wiring complete before I install the gear and don’t want to get surprised and stuck.
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Gary Blankenbiller
RV10 - # 40674
(N2GB Flying) |
|
| Back to top |
|
 |
millstees(at)ameritech.ne
Guest
|
| Posted: Mon Jun 30, 2008 7:04 am Post subject: Ramp to belly distance? |
|
|
Gary:
Mine measures 28.5" from the garage floor to the belly, at the firewall. That is with an Eggenfellner engine installed. My airplane rolls out of a standard 7' garage door with several inches to spare. No tail feathers of course.
Steve Mills N750SM (reserved)
RV-10 40486 Slow-build Eggenfellner E-6TI
Naperville, Illinois
Finishing kit, engine install
Do Not Archive
--
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Tim Olson
Joined: 25 Jan 2007
Posts: 2872
|
| Posted: Mon Jun 30, 2008 8:24 am Post subject: Ramp to belly distance? |
|
|
Gary,
From waaaaaay back before when I was in the same situation, I put
this together:
http://www.myrv10.com/tips/workarea.html
Tim
Tim Olson - RV-10 N104CD - Flying
orchidman wrote:
| Quote: |
Can someone publish the ramp (garage floor) to belly distance with the gear on? It would be really good to get the distance both with the engine on and before it is installed.
I am in the garage with the canopy top fully trimmed but not bolted down. Standing back and looking at the project this weekend I started looking at the distance from the top to my garage door opener which also translates to what I will need for clearance rolling out of the door.
I am trying to get as much of the wiring complete before I install the gear and don’t want to get surprised and stuck.
--------
Gary Blankenbiller
RV10 - # 40674
Instrument Panel, Fiberglass - SB
(N2GB registered)
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
orchidman
Joined: 10 Jul 2006
Posts: 277
Location: Oklahoma City - KRCE
|
|
| Back to top |
|
|
bldanrv9a(at)yahoo.com
Guest
|
| Posted: Tue Jul 01, 2008 3:34 pm Post subject: Ramp to belly distance? |
|
|
I'm not sure of the belly height but we were able to get ours out of a door that was 6'-4" high by 7'-11" wide door with the Lyc IO 540 hung. We were able to do this by removing the main wheels and fabricating a 4" dolly wheel. We rolled it about 6-8 feet on the dollys and then put mains back on. It worked great. I have pictures somewhere if you need to see them.
--- On Mon, 6/30/08, orchidman <gary(at)wingscc.com> wrote:
| Quote: | From: orchidman <gary(at)wingscc.com>
Subject: Ramp to belly distance?
To: rv10-list(at)matronics.com
Date: Monday, June 30, 2008, 9:17 AM
<gary(at)wingscc.com>
Can someone publish the ramp (garage floor) to belly
distance with the gear on? It would be really good to get
the distance both with the engine on and before it is
installed.
I am in the garage with the canopy top fully trimmed but
not bolted down. Standing back and looking at the project
this weekend I started looking at the distance from the top
to my garage door opener which also translates to what I
will need for clearance rolling out of the door.
I am trying to get as much of the wiring complete before I
install the gear and don’t want to get surprised and
stuck.
--------
Gary Blankenbiller
RV10 - # 40674
Instrument Panel, Fiberglass - SB
(N2GB registered)
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=190550#190550
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
orchidman
Joined: 10 Jul 2006
Posts: 277
Location: Oklahoma City - KRCE
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
