Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Radiator scoop

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kitfox-List
View previous topic :: View next topic  
Author Message
Dick Maddux



Joined: 24 Jun 2008
Posts: 516
Location: Milton, Fl

PostPosted: Sun Jun 29, 2008 5:03 am    Post subject: Radiator scoop Reply with quote

I just purchased a radiator scoop to dress up the looks on my model 4. The instructions say to mfg a series of .032 alum straps with nutplates and attach to the tubes under the floorboards OR use long bolts and go thru the floorboard.
It seems that everything is attached to the floorboard and it would be a major project to remove them.(rudder pedals,control sticks,etc.) My inclination is to use long bolts but I am concerned about the resulting appearance of the bolt heads,etc penetrating thru the floorboards. I would like to make it look nice.
Has anyone done this on a finished aircraft and if so maybe a better method?
  Thanks!
      Dick Maddux
      Fox 4-1200
      Rotax 912
      Pensacola,Fl  


Gas prices getting you down? Search AOL Autos for fuel-efficient used cars.


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List



Kitfox_029.jpg
 Description:
 Filesize:  388.23 KB
 Viewed:  721 Time(s)

Kitfox_029.jpg


Back to top
View user's profile Send private message
lcfitt(at)sbcglobal.net
Guest





PostPosted: Sun Jun 29, 2008 6:28 am    Post subject: Radiator scoop Reply with quote

Hi, Dick,

I had the radiator scoop on the previous Model IV, It was also a late
addition as well and mounted it through the floorboard with fender washers
under round head bolts (screws). I had a piece of carpet over the
floorboards, but in the new project, I will likely just let the screw heads
show.

Lowell

---


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List
Back to top
yodaone



Joined: 09 May 2008
Posts: 10
Location: Pompano Beach,FL

PostPosted: Sun Jun 29, 2008 7:56 am    Post subject: Re: Radiator scoop Reply with quote

I'm in the process of installing one, will post how I attached the scoop to the floor boards with without removing them.
Also added speed cuffs.


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List



Kifox stuff 011.jpg
 Description:
 Filesize:  902.28 KB
 Viewed:  742 Time(s)

Kifox stuff 011.jpg



Kifox stuff 013.jpg
 Description:
 Filesize:  889.77 KB
 Viewed:  763 Time(s)

Kifox stuff 013.jpg



Kifox stuff 023.jpg
 Description:
 Filesize:  930.11 KB
 Viewed:  719 Time(s)

Kifox stuff 023.jpg



Kifox fairings 002.jpg
 Description:
 Filesize:  853.46 KB
 Viewed:  676 Time(s)

Kifox fairings 002.jpg



Kifox fairings 004.jpg
 Description:
 Filesize:  998.77 KB
 Viewed:  717 Time(s)

Kifox fairings 004.jpg



Kifox stuff 028.jpg
 Description:
 Filesize:  839.59 KB
 Viewed:  708 Time(s)

Kifox stuff 028.jpg



Kifox stuff 001.jpg
 Description:
 Filesize:  751.42 KB
 Viewed:  737 Time(s)

Kifox stuff 001.jpg



_________________
1991 Kitfox IV 1050LB
Rotax 912UL
Back to top
View user's profile Send private message
dave



Joined: 22 Sep 2006
Posts: 1382

PostPosted: Sun Jun 29, 2008 2:01 pm    Post subject: Re: Radiator scoop Reply with quote

Quote:

--------------------------------------------------------------------------------

I'm in the process of installing one, will post how I attached the scoop to the floor boards with without removing them.
Also added speed cuffs.



what did you gain with your strut cuffs and the rad scoop ?


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
Realtime Kitfox movies to separate the internet chatter from the truth
http://www.youtube.com/user/kitfoxflyer
Hundreds of Kitfox Movies
Most viewed Kitfox on youtube
Most popular on youtube
Highest rated on youtube
Back to top
View user's profile Send private message Visit poster's website
Dick Maddux



Joined: 24 Jun 2008
Posts: 516
Location: Milton, Fl

PostPosted: Mon Jun 30, 2008 4:33 am    Post subject: Radiator scoop Reply with quote

Lowell,
Thanks for your reply. I will probably attach the scoop with the long bolts. Yodaone, thanks for the great pictures! They will be very helpful for my installation. Please send more pictures as you go thru the installation process. You have done very nice work.
I have also installed the wing cuffs on my aircraft. It was a  mystery how to attach them but I finally figured it out. I can't say as I can see any difference in airspeed but they look nice.(but then I have those fat tires)

      Dick Maddux
      Pensacola,Fl

Gas prices getting you down? Search AOL Autos for fuel-efficient used cars.


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List



Kitfox_036.jpg
 Description:
 Filesize:  369.18 KB
 Viewed:  671 Time(s)

Kitfox_036.jpg


Back to top
View user's profile Send private message
paul perry



Joined: 11 Jun 2008
Posts: 36

PostPosted: Mon Jun 30, 2008 5:20 am    Post subject: Re: Radiator scoop Reply with quote

Are those items (radiator scoop and cuffs) available from Kitfox, or is there another supplier?

- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List
Back to top
View user's profile Send private message
lcfitt(at)sbcglobal.net
Guest





PostPosted: Mon Jun 30, 2008 8:18 am    Post subject: Radiator scoop Reply with quote

Thanks, Dick,

Your airplane looks great. For some reason I don't recall the sunburst
design on the horizontal stab. Looks good in person, though.

Lowell

---


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List
Back to top
wingnut



Joined: 11 Jan 2006
Posts: 356

PostPosted: Mon Jun 30, 2008 4:29 pm    Post subject: Re: Radiator scoop Reply with quote

Where are you guys buying the air scoop and speed cuffs? May I ask how much they set you back?

- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
Luis Rodriguez
Model IV 1200
Rotax 912UL
Flying Weekly
Laurens, SC (34A)
Back to top
View user's profile Send private message Visit poster's website
Dick Maddux



Joined: 24 Jun 2008
Posts: 516
Location: Milton, Fl

PostPosted: Tue Jul 01, 2008 3:52 am    Post subject: Radiator scoop Reply with quote

Luis,
The radiator scoop is available from Kitfox and the wing cuffs are available from Williams aircraft.
    Dick Maddux
    Fox 4
    Pensacola,Fl

Gas prices getting you down? Search AOL Autos for fuel-efficient used cars.
[quote][b]


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List
Back to top
View user's profile Send private message
paul perry



Joined: 11 Jun 2008
Posts: 36

PostPosted: Tue Jul 01, 2008 5:11 am    Post subject: Re: Radiator scoop Reply with quote

I googled Williams Aircraft and didn't come up with a correct hit, do you have their web site/e-mail or phone number?
Thanks, Paul Perry
KF IV 1200
Rotax 912UL


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List
Back to top
View user's profile Send private message
jdmcbean(at)kitfoxaircraf
Guest





PostPosted: Tue Jul 01, 2008 6:34 am    Post subject: Radiator scoop Reply with quote

We also carry the wing cuffs…

Fly Safe !!
John & Debra McBean
Ph 208.337.5111
www.kitfoxaircraft.com
"The Sky is not the Limit... It's a Playground"



From: owner-kitfox-list-server(at)matronics.com [mailto:owner-kitfox-list-server(at)matronics.com] On Behalf Of Catz631(at)aol.com
Sent: Tuesday, July 01, 2008 5:50 AM
To: kitfox-list(at)matronics.com
Subject: Re: Radiator scoop


Luis,

The radiator scoop is available from Kitfox and the wing cuffs are available from Williams aircraft.

  Dick Maddux

  Fox 4

  Pensacola,Fl





Gas prices getting you down? Search AOL Autos for fuel-efficient used cars.
Quote:
http://www.matronics.com/Navigator?Kitfox-List
0
Quote:
1
Quote:
2
Quote:
3
Quote:
4
Quote:
5
Quote:
6
Quote:
7
Quote:
8
Quote:
9
No virus found in this incoming message. Checked by AVG. 270.4.3/1527 - Release Date: 6/30/2008 6:07 PM [quote][b]


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List
Back to top
rick(at)5mike3.com
Guest





PostPosted: Tue Jul 01, 2008 7:34 am    Post subject: Radiator scoop Reply with quote

Hey Paul,
He is a little hard to find with google.
Here is the link:
http://sonoragraphics.com/williamsaviation/catalog.html
Rick Kitfox IV / 912ul
---


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List
Back to top
Lynn Matteson



Joined: 10 Jan 2006
Posts: 2778
Location: Grass Lake, Michigan

PostPosted: Tue Jul 01, 2008 7:38 am    Post subject: Radiator scoop Reply with quote

I'm not a moderator, nor do I play one on TV, but it might be a good
idea to offer up the address in our first response, instead of making
the original poster have to ask the obvious next question....it would
save a few postings...and I've been guilty of it too. : )

Lynn Matteson
Kitfox IV Speedster
Jabiru 2200
Status: flying w/541 hrs
do not archive

On Jul 1, 2008, at 9:12 AM, pperrynas wrote:

Quote:

<pperryrph(at)sbcglobal.net>

I googled Williams Aircraft and didn't come up with a correct hit,
do you have their web site/e-mail or phone number?
Thanks, Paul Perry
KF IV 1200
Rotax 912UL


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=190689#190689




- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
Lynn
Kitfox IV-Jabiru 2200
N369LM
Back to top
View user's profile Send private message Send e-mail
msm_9949(at)yahoo.com
Guest





PostPosted: Tue Jul 01, 2008 7:56 am    Post subject: Radiator scoop Reply with quote

Here's his phone number:

Myrle Williams Aviation (602) 978-0553


Marco Menezes N99KX
Model 2 582-90 C-Box 3:1

--- On Tue, 7/1/08, pperrynas <pperryrph(at)sbcglobal.net> wrote:
[quote]From: pperrynas <pperryrph(at)sbcglobal.net>
Subject: Re: Radiator scoop
To: kitfox-list(at)matronics.com
Date: Tuesday, July 1, 2008, 9:12 AM

[quote]--> Kitfox-List message posted by: "pperrynas" <pperryrph(at)sbcglobal.net> I googled Williams Aircraft and didn't come up with a correct hit, do you have their web site/e-mail or phone number? Thanks, Paul Perry KF IV 1200 Rotax 912UL Read this topic online here: http://forums.matronics.com/viewtopic.php?p=190689#190689 [quote][b]


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List
Back to top
dave



Joined: 22 Sep 2006
Posts: 1382

PostPosted: Tue Jul 01, 2008 8:06 am    Post subject: Re: Radiator scoop Reply with quote

Quote:
kitfoxaircraf
Guest

Posted: Tue Jul 01, 2008 10:34 am Post subject: Radiator scoop

--------------------------------------------------------------------------------

We also carry the wing cuffs…


John, What can one expect on adding wing cuffs , rad scoop and or gas cap fairings.

I have a scoop on mine and I have a mold to make more but I not offering them. I find that my cowl mods conjunctionion in fact lowered the operating temperature more than anything.

I would like to see proof that speed gains on any of the above have been had.

My site has the cowl mods that worked well. The Kitfox cowl dumps hot engine air right into the radiator as originally made.


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
Realtime Kitfox movies to separate the internet chatter from the truth
http://www.youtube.com/user/kitfoxflyer
Hundreds of Kitfox Movies
Most viewed Kitfox on youtube
Most popular on youtube
Highest rated on youtube
Back to top
View user's profile Send private message Visit poster's website
MichaelGibbs(at)cox.net
Guest





PostPosted: Tue Jul 01, 2008 8:27 am    Post subject: Radiator scoop Reply with quote

Rick sez:

Quote:
Here is the link:
http://sonoragraphics.com/williamsaviation/catalog.html

That will work, but Murle's web site is actually:

<http://murlewilliamsaviation.com>

Mike G.


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List
Back to top
rick(at)5mike3.com
Guest





PostPosted: Tue Jul 01, 2008 8:40 am    Post subject: Radiator scoop Reply with quote

Thanks for the correction Mike!

Rick, Kitfox IV / 912ul / 50%
do not archive

---


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List
Back to top
yodaone



Joined: 09 May 2008
Posts: 10
Location: Pompano Beach,FL

PostPosted: Wed Jul 02, 2008 5:46 am    Post subject: Re: Radiator scoop Reply with quote

Installed the scoop and fastened it to the fuselage using three stainless screws. I did not remove the floor boards.

Chose this hardware because it provided the perfect spacer.
Hammered/flattened out the the spikes, drilled the holes, and installed.


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List



Scoop kitfox 041.jpg
 Description:
 Filesize:  1.05 MB
 Viewed:  595 Time(s)

Scoop kitfox 041.jpg



Scoop kitfox 010.jpg
 Description:
 Filesize:  824.57 KB
 Viewed:  559 Time(s)

Scoop kitfox 010.jpg



Scoop kitfox 007.jpg
 Description:
 Filesize:  775.45 KB
 Viewed:  552 Time(s)

Scoop kitfox 007.jpg



Scoop kitfox 034.jpg
 Description:
 Filesize:  947.43 KB
 Viewed:  550 Time(s)

Scoop kitfox 034.jpg



Bolt 010.jpg
 Description:
 Filesize:  951.6 KB
 Viewed:  560 Time(s)

Bolt 010.jpg



Bolt 004.jpg
 Description:
 Filesize:  943.87 KB
 Viewed:  589 Time(s)

Bolt 004.jpg



_________________
1991 Kitfox IV 1050LB
Rotax 912UL
Back to top
View user's profile Send private message
dave



Joined: 22 Sep 2006
Posts: 1382

PostPosted: Thu Jul 03, 2008 3:28 am    Post subject: Re: Radiator scoop Reply with quote

Rad scoop pic look great guys.

Now the questions -- what did you gain or lose in speed and coolant temps ?

Did you seal the rad to the scoop? Makes a differance you know in cooling.
read my previous posts on cowl mods......... just look at that design how the hot air from the engine dumps directly into the rad..........
http://www.cfisher.com/cowl.html


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
Realtime Kitfox movies to separate the internet chatter from the truth
http://www.youtube.com/user/kitfoxflyer
Hundreds of Kitfox Movies
Most viewed Kitfox on youtube
Most popular on youtube
Highest rated on youtube
Back to top
View user's profile Send private message Visit poster's website
Dick Maddux



Joined: 24 Jun 2008
Posts: 516
Location: Milton, Fl

PostPosted: Thu Jul 03, 2008 4:27 am    Post subject: Radiator scoop Reply with quote

Yodaone,
Thanks for the pictures. You have done a "super deluxe" job on that scoop.It looks great ! I will pattern my installation after yours.My only question is(and you guessed it) where did you get the scoop to floor fasteners.That is a nice clean installation.

    Dick Maddux
    Fox 4
    Pensacola,Fl

Gas prices getting you down? Search AOL Autos for fuel-efficient used cars.


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kitfox-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group