Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Gyrocopter intercept
Goto page 1, 2 Next

Matronics Email Lists Forum Index -> Kolb-List

View previous topic :: View next topic

Author Message

cristalclear13

Joined: 19 Sep 2007
Posts: 363
Location: Southeast Georgia

Posted: Sat Jul 05, 2008 7:10 am Post subject: Gyrocopter intercept

I was intercepted today by AF gyro.   



just kidding



Gyrocopter flew with me to Alma today on my first cross country in my Kolb Mark II Twinstar.

Gyrocopter formation.jpg

Description:

Filesize:

129.14 KB

Viewed:

455 Time(s)

_________________
Cristal Waters
Kolb Mark II Twinstar Rotax 503 DCSI Sept 2007 - sold Sept 2012
Private Pilot Aug 2008
ELSA Repairman for N193Y April 2008
Rotax 2 stroke maintenance April 2009

planecrazzzy
Guest

Posted: Sat Jul 05, 2008 8:50 am Post subject: Re: Gyrocopter intercept

Just curious.... Could he "keep up" or did you have to back off the throttle?

.

.

.

 Gotta Fly...

Mike & "Jaz" in MN

.

.

.

Wing Tips 024.jpg

Description:

Filesize:

60.61 KB

Viewed:

422 Time(s)

rlaird

Joined: 10 Jan 2006
Posts: 373
Location: Houston

Posted: Sat Jul 05, 2008 9:09 am Post subject: Gyrocopter intercept

That's looks like a Sparrowhawk, and they normally cruise in the 65-70mph range.

On Sat, Jul 5, 2008 at 11:50 AM, planecrazzzy <planecrazzzy(at)yahoo.com> wrote:

 	  Quote: 	
		   



 Just curious.... Could he "keep up" or did you have to back off the throttle?

 .

 .

 .

  Gotta Fly...

 Mike & "Jaz" in MN

 .

 .

 .



 --------

 .

 .

 .

 .

 .

 Do Not Archive





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p=191319#191319





 Attachments:



 http://forums.matronics.com//files/wing_tips_024_105.jpg


	


-- 

Why did the chicken cross the Mobius strip? To get to the other, er, um....

_________________
~~~~~~~~~~~~~~~~~~~
Robert Laird
formerly: MkIIIc w/ 912ULS & Gyrobee
current: Autogyro Cavalon w/ 914ULS
Houston, TX area
http://www.Texas-Flyer.com

cristalclear13

Joined: 19 Sep 2007
Posts: 363
Location: Southeast Georgia

Posted: Sat Jul 05, 2008 10:48 am Post subject: Re: Gyrocopter intercept

 	  planecrazzzy wrote: 	
		  Just curious.... Could he "keep up" or did you have to back off the throttle?

.

.

.

 Gotta Fly...

Mike & "Jaz" in MN

.

.

. 	




Mike, My climb rate is MUCH faster, but as far as cruising he can keep up or even pass me.  On the way there I was cruising at 65 but on the way back I cruised at 60 to save on gas.

It is a RAF 2000 gyrocopter.

_________________
Cristal Waters
Kolb Mark II Twinstar Rotax 503 DCSI Sept 2007 - sold Sept 2012
Private Pilot Aug 2008
ELSA Repairman for N193Y April 2008
Rotax 2 stroke maintenance April 2009

gliderx5

Joined: 30 Jun 2008
Posts: 203

Posted: Sat Jul 05, 2008 1:51 pm Post subject: Gyrocopter intercept

I just flew my 503 powered MKII and I only cruise at about 45 mph on the GPS at 5200 rpm. At 6200 I can get 60 mph but no faster.  Do these numbers sound like what others are seeing?  I have a 3 blade IVO prop.  Average fuel burn looks to be 3 gph.

--

Malcolm Morrison

http://home.comcast.net/~mmorrison123

Schleicher ASW-15

Pietenpol Air Camper

Kolb MKII

 -------------- Original message ----------------------

From: "cristalclear13" <cristalclearwaters(at)juno.com>

 	  Quote: 	

 planecrazzzy wrote:

 > Just curious.... Could he "keep up" or did you have to back off the throttle?

 > .

 > .

 > .

 >  Gotta Fly...

 > Mike & "Jaz" in MN

 > .

 > .

 > .

 Mike, My climb rate is MUCH faster, but as far as cruising he can keep up or 

 even pass me.  On the way there I was cruising at 65 but on the way back I 

 cruised at 60 to save on gas.

 It is a RAF 2000 gyrocopter.

 --------

 Cristal Waters

 Mark II Twinstar

 Read this topic online here:

 http://forums.matronics.com/viewtopic.php?p=191327#191327

cristalclear13

Joined: 19 Sep 2007
Posts: 363
Location: Southeast Georgia

Posted: Sat Jul 05, 2008 2:41 pm Post subject: Re: Gyrocopter intercept

 	  gliderx5 wrote: 	
		  I just flew my 503 powered MKII and I only cruise at about 45 mph on the GPS at 5200 rpm. At 6200 I can get 60 mph but no faster.  Do these numbers sound like what others are seeing?  I have a 3 blade IVO prop.  Average fuel burn looks to be 3 gph.



--

Malcolm Morrison

http://home.comcast.net/~mmorrison123

Schleicher ASW-15

Pietenpol Air Camper

Kolb MKII



	




Malcolm, On the way there my rpm was showing 6000 and I was cruising at 65mph on my ASI (and the GPS registered anywhere from 47 to 65).

On the way back my rpm was around 5700-5800 and I was cruising at 60mph on my ASI.  I have a 66inch wood prop.  At the rate I was going I burned approximately 4 GPH.

_________________
Cristal Waters
Kolb Mark II Twinstar Rotax 503 DCSI Sept 2007 - sold Sept 2012
Private Pilot Aug 2008
ELSA Repairman for N193Y April 2008
Rotax 2 stroke maintenance April 2009

planecrazzzy
Guest

Posted: Sat Jul 05, 2008 2:57 pm Post subject: Re: Gyrocopter intercept

Cruise speed for me, was increased ALOT by changing my 3 blade IVO

to a 2 blade ( I bought the "Blocks" from IVO )



 My cruise used to be around 60.... I'm 70 plus now



 The other day I was a little high on the throttle RPM's .... I looked at my Airspeed...  I was doing 80 !!!



                      Gotta Fly...

                                       Mike & "Jaz" in MN.

.

.

PS  Climb out is a little less........ "I'LL  TAKE IT "

.

.

.

gliderx5

Joined: 30 Jun 2008
Posts: 203

Posted: Sat Jul 05, 2008 3:50 pm Post subject: Gyrocopter intercept

Maybe I should try more prop pitch.  My CHTs are 300 but my EGTs peak at 1200 (1100 at full power climb).  I have home made streamlined struts, but no other "speed" mode.  I don't have a VSI, but I will do some timed climbs to see what type of performance I'm getting.  What are you seeing for climb rate?  If I could get the cruise up to 55 that would be huge!

--

Malcolm Morrison

http://home.comcast.net/~mmorrison123

Schleicher ASW-15

Pietenpol Air Camper

Kolb MKII

 -------------- Original message ----------------------

From: "cristalclear13" <cristalclearwaters(at)juno.com>

 	  Quote: 	

 gliderx5 wrote:

 > I just flew my 503 powered MKII and I only cruise at about 45 mph on the GPS 

 at 5200 rpm. At 6200 I can get 60 mph but no faster.  Do these numbers sound 

 like what others are seeing?  I have a 3 blade IVO prop.  Average fuel burn 

 looks to be 3 gph.

 > 

 > --

 > Malcolm Morrison

 > http://home.comcast.net/~mmorrison123

 > Schleicher ASW-15

 > Pietenpol Air Camper

 > Kolb MKII

 > 

 > 

 Malcolm, On the way there my rpm was showing 6000 and I was cruising at 65mph on 

 my ASI (and the GPS registered anywhere from 47 to 65).

 On the way back my rpm was around 5700-5800 and I was cruising at 60mph on my 

 ASI.  I have a 66inch wood prop.  At the rate I was going I burned approximately 

 4 GPH.

 --------

 Cristal Waters

 Mark II Twinstar

 Read this topic online here:

 http://forums.matronics.com/viewtopic.php?p=191355#191355

JetPilot

Joined: 10 Jan 2006
Posts: 1246

Posted: Sat Jul 05, 2008 4:50 pm Post subject: Re: Gyrocopter intercept

Try increasing your pitch, it does not take long, and you can always put it back if you dont like it.



I decreased the pitch on my 912-s a couple weeks ago to get full RPM on takeoff and climb out....   It got me a couple more hundred FPM in climb, but cruise sucked, I had to run a bunch more power just to get the same cruise I did before.  I put the pitch back for 5200 RPM on climb out, it restored my cruise speed with lower power settings.



Mike

_________________
"NO FEAR" - If you have no fear you did not go as fast as you could have !!!

Kolb MK-III Xtra, 912-S

gaman(at)att.net
Guest

Posted: Sat Jul 05, 2008 6:23 pm Post subject: Gyrocopter intercept

Might be helpful to know the top RPM on climb out.



---

gliderx5

Joined: 30 Jun 2008
Posts: 203

Posted: Sat Jul 05, 2008 7:24 pm Post subject: Gyrocopter intercept

lcottrell

Joined: 29 May 2006
Posts: 1494
Location: Jordan Valley, Or

Posted: Sat Jul 05, 2008 7:47 pm Post subject: Gyrocopter intercept

---

_________________
do not archive

ez(at)embarqmail.com
Guest

Posted: Sun Jul 06, 2008 4:13 am Post subject: Gyrocopter intercept

Nope, don't mess with your carb till you get your prop set up  

correctly. Your top speed indicates that you do not have the optimum  

prop configuration. Unless your prop diameter is less than 66"  

diameter you will do significantly better with two blades than with  

three. What you need is more prop pitch.

Gene



On Jul 5, 2008, at 11:45 PM,  Larry Cottrell wrote:



 	  Quote: 	
		   

 >



 Sounds as though you might be a bit lean on your midrange. You might  

 try to raise your jet needle one notch.

 Larry C

gliderx5

Joined: 30 Jun 2008
Posts: 203

Posted: Sun Jul 06, 2008 4:53 pm Post subject: Gyrocopter intercept

Quick update

I added a half turn more pitch to the 3 blade IVO and my 5200 RPM cruise went from 45 to 50 MPH.  My top speed went from 60 to 65 MPH.  Climb still good (not sure of the rate).  EGTs  quite a bit cooler, but engine running rough in the mid range.  I think it's too rich now.  I will try dropping the needle 1 notch later this week.

--

Malcolm Morrison

http://home.comcast.net/~mmorrison123

Schleicher ASW-15

Pietenpol Air Camper

Kolb MKII

 -------------- Original message ----------------------

From: Eugene Zimmerman <ez(at)embarqmail.com>

 	  Quote: 	

 Nope, don't mess with your carb till you get your prop set up  

 correctly. Your top speed indicates that you do not have the optimum  

 prop configuration. Unless your prop diameter is less than 66"  

 diameter you will do significantly better with two blades than with  

 three. What you need is more prop pitch.

 Gene

 On Jul 5, 2008, at 11:45 PM,  Larry Cottrell wrote:

 > 

 > >

 >

 >

 >

 > Sounds as though you might be a bit lean on your midrange. You might  

 > try to raise your jet needle one notch.

 > Larry C

 >

 >

 >

 >

 >

lcottrell

Joined: 29 May 2006
Posts: 1494
Location: Jordan Valley, Or

Posted: Sun Jul 06, 2008 7:00 pm Post subject: Gyrocopter intercept

---

_________________
do not archive

grantr

Joined: 12 Sep 2007
Posts: 217

Posted: Sun Jul 06, 2008 7:44 pm Post subject: Re: Gyrocopter intercept

Does that RAF have a horizontal stabilizer on it?  If it doesn't  don't fly in it. That particular gyroplane has killed many high time pilots. Its unstable without the H stab on it.

cristalclear13

Joined: 19 Sep 2007
Posts: 363
Location: Southeast Georgia

Posted: Mon Jul 07, 2008 4:49 am Post subject: Re: Gyrocopter intercept

 	  lcottrell wrote: 	
		  --- 	




Larry,

I can't ever see what you are writing.  It shows up as blank on the website and I don't get the emails.  Maybe it's the font you are using.  I think I saw Matt Dralle mention that to someone else.



Cristal

_________________
Cristal Waters
Kolb Mark II Twinstar Rotax 503 DCSI Sept 2007 - sold Sept 2012
Private Pilot Aug 2008
ELSA Repairman for N193Y April 2008
Rotax 2 stroke maintenance April 2009

cristalclear13

Joined: 19 Sep 2007
Posts: 363
Location: Southeast Georgia

Posted: Mon Jul 07, 2008 4:54 am Post subject: Re: Gyrocopter intercept

 	  grantr wrote: 	
		  Does that RAF have a horizontal stabilizer on it?  If it doesn't  don't fly in it. That particular gyroplane has killed many high time pilots. Its unstable without the H stab on it. 	




Grant,

Now you're delving into what has been "discussed to death" on threads and threads of gyro forums.  I won't go there.  I just know that I totally trust riding in that gyro and totally trust who is flying it. 



Thanks for the concern.

Cristal

_________________
Cristal Waters
Kolb Mark II Twinstar Rotax 503 DCSI Sept 2007 - sold Sept 2012
Private Pilot Aug 2008
ELSA Repairman for N193Y April 2008
Rotax 2 stroke maintenance April 2009

cristalclear13

Joined: 19 Sep 2007
Posts: 363
Location: Southeast Georgia

Posted: Mon Jul 07, 2008 4:57 am Post subject: Re: Gyrocopter intercept

 	  gliderx5 wrote: 	
		  I don't have a VSI, but I will do some timed climbs to see what type of performance I'm getting.  What are you seeing for climb rate? 	




Malcolm,

I don't have a VSI either.  I'll time my climbs next time I go and let you know.  I'm glad you are seeing better performance after adjusting your prop.



Thanks,

Cristal

_________________
Cristal Waters
Kolb Mark II Twinstar Rotax 503 DCSI Sept 2007 - sold Sept 2012
Private Pilot Aug 2008
ELSA Repairman for N193Y April 2008
Rotax 2 stroke maintenance April 2009

Ed in JXN

Joined: 24 Mar 2006
Posts: 122

Posted: Mon Jul 07, 2008 8:53 am Post subject: Gyrocopter intercept

Hi Cristal,



    What state are you in?



Ed in JXN

MkII/503



Do not archive.

---

Display posts from previous:

	Matronics Email Lists Forum Index -> Kolb-List	All times are GMT - 8 Hours Goto page 1, 2 Next
Page 1 of 2

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum