Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

speaking of overlays

Matronics Email Lists Forum Index -> TeamGrumman-List

View previous topic :: View next topic

Author Message

GrummanDude

Joined: 15 Jan 2006
Posts: 926
Location: Auburn, CA

Posted: Tue Jul 15, 2008 10:55 am Post subject: speaking of overlays

I just got the first 2 sets of the new overlays.  THe primary difference is that these have their own clear plastic insert for the gauges.  The clear plastic will go on the INSIDE of the panel.  The right overlay is flat; i.e., no joggle for the clear plastic like the original.  Thus, if you wish, you will be able to mount the overlay directly over the gauges with no attaching screws showing.  The gauges themselves could be mounted directly to the panel with countersunk screws. 

 

  I found a couple of minor errors in the panels.  They are being corrected.  The new panels do not need any trimming to fit as with the previous versions of the aluminum overlays.

 The Famous, the Infamous, the Lame - in your browser. Get the TMZ Toolbar Now! 

  [quote][b]

- The Matronics TeamGrumman-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?TeamGrumman-List

_________________
Gary
AuCountry Aviation
Home of Team Grumman

N26390(at)aol.com
Guest

Posted: Tue Jul 15, 2008 12:23 pm Post subject: speaking of overlays

Sorry, I must have missed the beginning of this discussion. But, what or  which overlay are you talking about?  Available for an AA5A with similar  minor modifications?

 Thanks,

 Roger  Rucker

AA5A '78 HWO   

  In a message dated 07/15/2008 2:56:11 P.M. Eastern Daylight Time,  teamgrumman(at)aol.com writes:

  	  Quote: 	
		  I just    got the first 2 sets of the new overlays.  THe primary difference is that    these have their own clear plastic insert for the gauges.  The clear    plastic will go on the INSIDE of the panel.  The right overlay is flat;    i.e., no joggle for the clear plastic like the original.  Thus, if you    wish, you will be able to mount the overlay directly over the gauges with no    attaching screws showing.  The gauges themselves could be mounted    directly to the panel with countersunk screws.    



   I found a couple of minor errors in the panels.  They are being    corrected.  The new panels do not need any trimming to fit as with the    previous versions of the aluminum overlays.

         The Famous, the Infamous, the Lame - in your browser. Get the TMZ Toolbar Now! 

 	  Quote: 	
		  



t href="http://www.matronics.com/Navigator?TeamGrumman-List">http://www.matronics.com/Navigator?TeamGrumman-List

.matronics.com/">http://forums.matronics.com

://www.matronics.com/contribution">http://www.matronics.com/contribution



	
	






Get the scoop on last night's hottest shows and the live music scene in your area - Check out TourTracker.com!

- The Matronics TeamGrumman-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?TeamGrumman-List

GrummanDude

Joined: 15 Jan 2006
Posts: 926
Location: Auburn, CA

Posted: Tue Jul 15, 2008 9:50 pm Post subject: speaking of overlays

These are aluminum panel overlays to replace the plastic overlay.  We will be offering two types.  One for the basic panel, the other will be blank on the right where the engine gauges are.

 

 

 --

- The Matronics TeamGrumman-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?TeamGrumman-List

_________________
Gary
AuCountry Aviation
Home of Team Grumman

Display posts from previous:

	Matronics Email Lists Forum Index -> TeamGrumman-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum